All Products
Every one of the 209 products we make, grouped into 26 ranges. Nothing is paginated and nothing is held back for an enquiry.
Fiber Optic Components
Fiber Optic Patchcord
Factory-terminated jumpers that turn a planned link budget into a working one
FC/UPC-FC/UPC SM Simplex Patchcord
The FC fiber optic cable is available in both singlemode and multimode versions, and is fully intermateable with NTT-FC products.
View Details
LC/PC-LC/PC 62.5/125 MM Duplex Patchcord
We offer LC fiber cables and LC fiber patch, including single mode 9/125 and multimode 50/125, multimode 62.5/125, LC-LC, LC-SC, LC-ST, LC-MU, LC-MTRJ, LC-MPO.
View Details
LC/PC-LC/PC 62.5/125 MM Simplex Patchcord
We offer LC fiber cables and LC fiber patch, including single mode 9/125 and multimode 50/125, multimode 62.5/125, LC-LC, LC-SC, LC-ST, LC-MU, LC-MTRJ, LC-MPO.
View Details
LC/UPC-LC/UPC SM Simplex Patchcord
We offer LC fiber cables and LC fiber patch, including single mode 9/125 and multimode 50/125, multimode 62.5/125, LC-LC, LC-SC, LC-ST, LC-MU, LC-MTRJ, LC-MPO.
View Details
MT-RJ/UPC-MT-RJ/UPC SM Duplex Patchcord
The singlemode or multimode MT-RJ fiber cable available from Huihong are used in two fiber applications and are well suited for high density applications.
View Details
SC/PC-SC/PC 62.5/125 MM Duplex Patchcord
SC fiber cable is one of the earliest stype and one of the most commonly used fiber optic cable, it is convenient to use and cost saving - It is the most cheapest.
View Details
SC/PC-SC/PC 62.5/125 MM Simplex Patchcord
SC fiber cable is one of the earliest stype and one of the most commonly used fiber optic cable, it is convenient to use and cost saving - It is the most cheapest.
View Details
SC/UPC-SC/UPC SM Simplex Patchcord
SC fiber cable is one of the earliest stype and one of the most commonly used fiber optic cable, it is convenient to use and cost saving - It is the most cheapest.
View Details
SC/UPC-SC/UPC SM Duplex Patchcord
UPC polish, single mode, duplex. Used for connecting transceivers to an optical distribution frame in a data hall.
View Details
ST/PC-ST/PC 62.5/125 MM Simplex Patchcord
ST fiber cable connector has a bayonet-style housing and a long spring-loaded ferrule hold the fiber.
View Details
ST/UPC-ST/UPC SM Simplex Patchcord
ST fiber cable connector has a bayonet-style housing and a long spring-loaded ferrule hold the fiber.
View DetailsVarious Pigtail
Pre-terminated tails that put the factory end face inside your splice tray
LC/MM Pigtail
Multimode. Used for emergency restoration of a damaged distribution cable.
View Details
LC/SM Pigtail
Single mode. Used for emergency restoration of a damaged distribution cable.
View Details
SC/APC Pigtail (Ref 351)
APC polish. Used for emergency restoration of a damaged distribution cable.
View Details
SC/APC Pigtail (Ref 352)
APC polish. Used for splicing subscriber drops inside an FTTH termination box.
View Details
SC/SM Pigtail
Single mode. Used for building custom terminal boxes on an assembly bench.
View Details
SC/MM Pigtail
Multimode. Used for emergency restoration of a damaged distribution cable.
View Details
Bundle Pigtail
Bundle. Used for building custom terminal boxes on an assembly bench.
View Details
MTP-LC (Ref 356)
Used for emergency restoration of a damaged distribution cable.
View Details
Waterproof Pigtails
Used for building custom terminal boxes on an assembly bench.
View Details
Breakout Kit/Fanout Kit
Fanout. Used for emergency restoration of a damaged distribution cable.
View Details
FC/APC Pigtail
APC polish. Used for terminating feeder cable inside a dome or horizontal splice closure.
View Details
12F SC Bundle Pigtails
Bundle. Used for emergency restoration of a damaged distribution cable.
View DetailsFiber Optic Connector
Connector bodies and kits for assembly houses and field termination
FC Connector MM
FC fiber products and FC fiber optic connectors are widely used on the equipment and cable assemblies, especially on the test equipment interface.
View Details
FC Connector SM
FC fiber products and FC fiber optic connectors are widely used on the equipment and cable assemblies, especially on the test equipment interface.
View Details
LC/PC Connector MM
LC fiber optic connectors and related LC fiber products are widely used in telecommunications and on various kinds of the fiber optic equipment.
View Details
LC/PC Connector SM
LC fiber optic connectors and related LC fiber products are widely used in telecommunications and on various kinds of the fiber optic equipment.
View Details
SC/PC Connector MM
SC fiber products are commonly seen and SC fiber optic connectors are found on many equipment and cable assemblies.
View Details
SC/PC Connector SM
SC fiber products are commonly seen and SC fiber optic connectors are found on many equipment and cable assemblies.
View Details
ST/PC Connector MM
ST fiber optic connectors and related ST fiber products are widely used in today’s telecommunication filed including both long haul and local network applications.
View Details
ST/PC Connector SM
ST fiber optic connectors and related ST fiber products are widely used in today’s telecommunication filed including both long haul and local network applications.
View DetailsFiber Adapter
Same-type mating sleeves that hold two ferrules on one axis
LC/PC Adapter MM
We supply LC fiber optic adapters, including simplex, duplex and quad types; these LC adapters are single mode and multimode styles with plastic housing and.
View Details
FC/PC Adapter SM
We supply FC fiber optic adapters, including square type, single D type and double D types, in single mode and multimode versions.
View Details
FC/PC Adapter MM
We supply FC fiber optic adapters, including square type, single D type and double D types, in single mode and multimode versions.
View Details
LC/PC Adapter SM
We supply LC fiber optic adapters, including simplex, duplex and quad types; these LC adapters are single mode and multimode styles with plastic housing and.
View Details
SC/PC Adapter MM
We supply SC fiber optic adapters; these products are various types including single mode and multimode, zirconia sleeve and bronze sleeve, simplex and duplex.
View Details
SC/PC Adapter SM
We supply SC fiber optic adapters; these products are various types including single mode and multimode, zirconia sleeve and bronze sleeve, simplex and duplex.
View Details
ST/PC Adapter MM
We supply the ST fiber optic adapters, including the single mode and multimode types.
View Details
ST/PC Adapter SM
We supply the ST fiber optic adapters, including the single mode and multimode types.
View Details
MU Adapter
We supply MU fiber optic adapters, including the simplex and duplex types, single mode and multimode styles.
View Details
MT-RJ Adapter
We supply the MTRJ fiber optic adapters, including single mode and multimode types, these MT-RJ fiber adapters are with polymer housing, with flange type adapters.
View Details
E2000 Adapter
We supply the E2000 fiber optic adapters, including the single mode and multimode types, there are UPC and APC adapters available.
View Details
SMA Adapter
We supply SMA multimode fiber optic adapters, these FSMA mating adapter can be used with all standard FSMA fiber optic connectors and are suitable for panel.
View Details
DIN Adapter
We supply DIN fiber optic adapters which come with zirconia sleeves and threaded size.
View Details
SC Withdrawal Adapter
Used for populating an optical distribution frame during a build-out.
View Details
LC Quad Flangeless Adapter
Quad. Used for replacing worn ports found during a maintenance sweep.
View Details
SC/PC Adapter
PC polish. Used for replacing worn ports found during a maintenance sweep.
View Details
E2000 Duplex Adapter
Duplex. Used for populating an optical distribution frame during a build-out.
View Details
SC/APC Withdrawal Adapter
APC polish. Used for creating temporary cross-connects on a test bench.
View DetailsHybrid Adapter
Cross-type mating sleeves that join two different connector standards
LC-FC LC-SC
Used for connecting an FC test set to an SC or LC patch field.
View Details
SCm-FCm&f
Used for connecting an FC test set to an SC or LC patch field.
View Details
SCm-LCf (Ref 288)
Used for connecting an FC test set to an SC or LC patch field.
View Details
FCm-LCf (Ref 289)
Used for extending a cord's reach through a panel without a new assembly.
View Details
E2000-SC Adapter
Used for extending a cord's reach through a panel without a new assembly.
View Details
FC-DIN
Used for phasing an ST multimode backbone into new LC equipment.
View Details
FCm-FCf
Used for temporary cross-connects during a cutover window.
View Details
LC-SC Sleeve
Used for bench testing a component with a connector the test set does not carry.
View Details
LCm-FCf
Used for temporary cross-connects during a cutover window.
View Details
LCm-SCf
Used for connecting an FC test set to an SC or LC patch field.
View Details
LCm-STf
Used for phasing an ST multimode backbone into new LC equipment.
View Details
FCm-LCf (Ref 419)
Used for connecting an FC test set to an SC or LC patch field.
View Details
FCm-SCf
Used for extending a cord's reach through a panel without a new assembly.
View Details
FCm-STf
Used for extending a cord's reach through a panel without a new assembly.
View Details
SCm-FCf
Used for phasing an ST multimode backbone into new LC equipment.
View Details
SCm-LCf (Ref 423)
Used for phasing an ST multimode backbone into new LC equipment.
View Details
SCm-STf
Used for bench testing a component with a connector the test set does not carry.
View Details
STm-LCf
Used for temporary cross-connects during a cutover window.
View Details
STm-SCf
Used for temporary cross-connects during a cutover window.
View DetailsBare Adapter
Temporary connections to unterminated fiber for test and splice verification
SC Bare Adapter
Used for power measurement on an unterminated distribution cable.
View Details
ST Bare Adapter (Ref 429)
Used for fiber training and practical assessment.
View Details
FC Bare Adapter
Used for power measurement on an unterminated distribution cable.
View Details
ST Bare Adapter (Ref 343)
Used for laboratory characterisation of fiber samples.
View Details
FC Square Bare Adapter
Used for power measurement on an unterminated distribution cable.
View Details
LC Square Bare Adapter
Used for power measurement on an unterminated distribution cable.
View Details
SC Square Bare Adapter
Used for fault localisation during a restoration.
View DetailsFiber Optic Attenuator
Controlled loss, for when a receiver is being overdriven
MU Attenuator
We supply both UPC MU fiber optic attenuator and APC MU fiber optic attenuators for single mode applications.
View Details
LC Attenuator
We supply single mode LC fiber optic attenuators including the bulkhead LC attenuator and female to male LC fiber attenuator.
View Details
Attenuator
Sometimes in the fiber optic network, people may need to reduce or balance the power of the light transmitted from one device to another device, fiber optic.
View Details
FC Attenuator
We supply FC APC single mode fiber optic attenuator and FC UPC single mode fiber optic attenuator, both of them are with ceramic sleeves and accurate FC connection.
View Details
SC Attenuator
We supply female to male SC fiber optic attenuator and bulkhead SC fiber optic attenuator.
View Details
ST Attenuator
We supply both UPC ST fiber optic attenuator and APC ST fiber optic attenuator for single mode applications; they are with 1240nm to 1620nm compatible working.
View Details
MU 4.5mm Attenuator
Multimode. Used for characterizing receiver sensitivity on a test bench.
View Details
FC Tunable Attenuator
Used for bringing a short DWDM or long-reach link into receiver range.
View Details
SC Tunable Attenuator
Used for bringing a short DWDM or long-reach link into receiver range.
View Details
MEMS Variable Optical Attenuator
Used for bringing a short DWDM or long-reach link into receiver range.
View DetailsFiber Optic Splitter
Passive power division, the component PON architecture is built on
Splitter (Ref 311)
Used for distributing signal inside an FTTH splice closure.
View Details
Splitter (Ref 312)
Used for splitting for monitoring and test taps.
View Details
Splitter Enclosure
Used for dividing a PON feeder inside a street cabinet.
View Details
WDM Coupler
Used for optical distribution in a CATV headend.
View Details
MTP-LC (Ref 297)
Used for dividing a PON feeder inside a street cabinet.
View Details
Fiber Splitter
Used for distributing signal inside an FTTH splice closure.
View DetailsPassive Component
Circulators, isolators and collimators for optical system builders
Optical Circulator
Used for fiber sensing interrogator construction.
View Details
Fiber Isolator
1064nm Polarization Insensitive Isolator ; 1310/1480/1550/1590nm Isolator
View Details
Optical Fiber Collimator
Used for coupling fiber into a free-space optical bench.
View DetailsFTTH & Distribution
Horizontal FOSC
In-line splice closures for aerial, duct and direct-buried straight-through joints
ELHY001
Used for duct and hand-hole joints on buried feeder runs.
View Details
ELHY002
Used for straight-through joints on aerial distribution cable.
View Details
ELHY003
Used for duct and hand-hole joints on buried feeder runs.
View Details
EL001
Used for restoration splicing after a cable cut.
View Details
EL003
Used for staged network builds where trays are added later.
View Details
EL004
Used for branch splicing to serve a street or a building cluster.
View Details
EL005
Used for restoration splicing after a cable cut.
View Details
EL006
Used for staged network builds where trays are added later.
View DetailsDome FOSC
Vertical dome closures for pole, wall and hand-hole splice points
ELDY001
Used for wall-mounted joints at a building entry.
View Details
ELDY002
Used for progressive subscriber connection as a street is sold.
View Details
ELDY003
Used for branch splicing from a feeder into multiple drop cables.
View Details
ELDY004
Used for wall-mounted joints at a building entry.
View Details
ELDY005
Used for progressive subscriber connection as a street is sold.
View Details
ELDY006
Used for progressive subscriber connection as a street is sold.
View Details
ELDY007
Used for hand-hole splice points in a buried network.
View Details
ELD001
Used for progressive subscriber connection as a street is sold.
View Details
ELD002
Used for progressive subscriber connection as a street is sold.
View DetailsFTTH Solution
Drop-side hardware for the last span into the subscriber premises
Field Assembly/Fast Connector
Mechanical field termination without a fusion splicer
SC Fast Connector (Ref 279)
Used for mDU riser terminations where a splicer cannot be set up.
View Details
FC Fast Connector (Ref 282)
Used for terminating a subscriber drop at the premises.
View Details
SC Fast Connector (Ref 286)
Used for restoring a broken patch cord in a live cabinet.
View Details
SC Fast Connector (Ref 284)
Used for terminating a subscriber drop at the premises.
View Details
FC Fast Connector (Ref 285)
Used for mDU riser terminations where a splicer cannot be set up.
View Details
SC Field Assembly Fast Connector
Specifications SC Field Assembly Optical Connector SC Field Assembly Optical Connector Specifications SC Quick Assembly Connector, Fast Connector: Factory-installed.
View DetailsFTTH Termination Box
Compact subscriber-side boxes that end the drop and present a clean port
2 Port SC
Used for ending a subscriber drop inside a home or small office.
View Details
2 Port SC Mini TB
Used for small business fiber entry points.
View Details
2 Port Mini TB (Ref 368)
Used for ending a subscriber drop inside a home or small office.
View Details
4 Port Mini TB
Used for replacing a damaged in-home termination on a service call.
View Details
2 Port Mini TB (Ref 366)
Used for replacing a damaged in-home termination on a service call.
View DetailsTerminal Box
Wall and pole distribution boxes between the feeder and the drops
12F Terminal Box
Used for street-level distribution from a feeder to subscriber drops.
View Details
ST Terminal Box
Used for building entry distribution in an apartment block.
View Details
ELTB005
Used for street-level distribution from a feeder to subscriber drops.
View Details
ELTB001
Used for street-level distribution from a feeder to subscriber drops.
View Details
ELTB002
Used for street-level distribution from a feeder to subscriber drops.
View Details
ELTB004
Used for street-level distribution from a feeder to subscriber drops.
View Details
ELTB003
Used for campus distribution between buildings.
View DetailsODF
Rack-mounted optical distribution frames that make a fiber plant maintainable
1u 12F ODF
Used for terminating backbone cable in a central office.
View Details
2u 24F ODF
Used for aggregation nodes in an access network.
View Details
3u 48F ODF
Used for terminating backbone cable in a central office.
View Details
4u 72F ODF
Used for aggregation nodes in an access network.
View Details
5u 96F ODF
Used for campus building entry and distribution.
View Details
12F Integrative Tray (Ref 382)
Used for building a data-hall patch field.
View Details
12F Integrative Tray (Ref 383)
Used for campus building entry and distribution.
View DetailsFace Plate
Wall outlets that present a fiber port where the user actually is
LC (Ref 359)
Used for fiber to the desk in an office fit-out.
View Details
SC
Used for media and broadcast facility wall outlets.
View Details
MT-RJ
Used for retrofitting fiber into an existing structured cabling estate.
View Details
LC (Ref 362)
Used for in-home fiber outlets in a residential build.
View Details
ELF001
Used for fiber to the desk in an office fit-out.
View Details
ELF002
Used for media and broadcast facility wall outlets.
View Details
ELF003
Used for retrofitting fiber into an existing structured cabling estate.
View Details
ELF004
Used for in-home fiber outlets in a residential build.
View Details
Face Plate (Ref 436)
Used for retrofitting fiber into an existing structured cabling estate.
View Details
Face Plate1
Used for retrofitting fiber into an existing structured cabling estate.
View Details
Face Plate 86
Used for media and broadcast facility wall outlets.
View DetailsAccessories
The consumables and small parts an installation actually runs out of
Ribbon Heat-shrink Tube
Used for restocking van and workshop consumable kits.
View Details
Heat-shrink Tube
Used for protecting fusion splices in the field.
View Details
LC Boot
Used for restocking van and workshop consumable kits.
View Details
Fiber Optic Cable Saddle
Used for protecting fusion splices in the field.
View Details
Integrative Tray (Ref 306)
Used for polishing connectors on an assembly bench.
View Details
Tray (Ref 307)
Used for restocking van and workshop consumable kits.
View Details
Integrative Tray (Ref 305)
Used for polishing connectors on an assembly bench.
View Details
Tray (Ref 304)
Used for protecting fusion splices in the field.
View Details
Tray (Ref 303)
Used for protecting fusion splices in the field.
View Details
Metal Ferrule
Used for loading splice trays during closure and ODF work.
View Details
MIPOX Polishing Film
Used for loading splice trays during closure and ODF work.
View DetailsNetwork & Testing
Fiber Optic Media Converter
Copper to fiber conversion where distance or interference rules out twisted pair
10/100 Media Converter
Used for backhauling an access point or small cell.
View Details
Double Fiber
Used for linking buildings on a campus over multimode or single-mode fiber.
View Details
10/100/1000 Double Fiber
Used for extending CCTV to a remote gate or car park.
View Details
10/100/1000 Single Fiber
Used for connecting industrial equipment across a noisy plant.
View Details
SFP-SFP
Used for consolidating converters into a rack chassis in a comms room.
View Details
14 Media Converter Rack (Ref 276)
Used for connecting industrial equipment across a noisy plant.
View Details
14 Media Converter Rack (Ref 277)
Used for backhauling an access point or small cell.
View Details
Four Ports 10/100/1000M Ethernet
Used for backhauling an access point or small cell.
View DetailsTest Equipment
Splicers, meters, identifiers and inspection tools for people who have to prove the link works
EL-DVP-105
Used for fusion splicing outside plant and drop cable.
View Details
EL-SI-01
Used for identifying the live fiber in a congested closure.
View Details
BD301 Fiber Identifier
Used for inspecting end faces on an assembly bench.
View Details
CFS-2
Used for fusion splicing outside plant and drop cable.
View Details
KL-280 Fusion Splicer
Used for identifying the live fiber in a congested closure.
View Details
KL-300T Fusion Splicer
Used for fusion splicing outside plant and drop cable.
View Details
BD203
Used for inspecting end faces on an assembly bench.
View Details
KL-310 Optical Power Meter
Used for fusion splicing outside plant and drop cable.
View Details
BD503
Used for identifying the live fiber in a congested closure.
View Details
KL-330 Optical Multi Meter
Used for certifying a newly installed link against its budget.
View Details
KL08A Optical Tool Box
Used for identifying the live fiber in a congested closure.
View Details
KL08C Optical Tool Box
Used for identifying the live fiber in a congested closure.
View Details
Fiber Video Scope
Used for localising a break during an emergency restoration.
View Details
BD501
Used for identifying the live fiber in a congested closure.
View Details
BD502
Used for fusion splicing outside plant and drop cable.
View DetailsFiber Cleaning Tool
The cheapest fix for the most common cause of optical loss
Fiber Connector Cleaner
Used for routine cleaning during commissioning and handover.
View Details
One Click Cleaner (2.5)
Used for end-face preparation on an assembly bench.
View Details
One Click Cleaner (1.25)
Used for end-face preparation on an assembly bench.
View DetailsCoaxial Cable
Feeder and data cable for RF distribution and structured copper runs
Coaxial Connector
Feeder and instrument connectors that keep impedance continuous
3/8 Connector
Used for test bench connections on measurement equipment.
View Details
1/2 Connector
Used for maintenance replacement of a corroded outdoor connector.
View Details
BNC M Connector for BT-3002
Used for patching video and instrumentation signals.
View Details
BNC Male for BT3002
Used for terminating feeder at an antenna or at equipment.
View DetailsSplitter
RF signal division for antenna and distribution systems
Antenna
Dual-band antennas for in-building and distributed coverage
Mouse
Wired and wireless computer mice supplied alongside the network hardware
ELW01001
3D optical mouse
View Details
ELW01002
3D optical mouse
View Details
ELW01009
Mini optical mouse
View Details
ELW01004
3D optical mouse
View Details
ELW01005
3D optical mouse
View Details
ELW01006
3D optical mouse
View Details
ELW01007
Mini optical mouse
View Details
ELW01010
QQ optical mouse
View Details
ELL01001
Optical oil mouse
View Details
ELL01002
Optical oil mouse
View Details
ELL01003
Liquid optical mouse
View DetailsCannot Find The Exact Part
Send us the model, a drawing or a sample. If it belongs to a range we build, we will quote it even when it is not listed here.