One Click Cleaner (2.5)
One Click Cleaner (2.5) is part of the fiber cleaning tool range built by Ever Expresslink Limited in Ningbo, China.
The cheapest fix for the most common cause of optical loss
Interested in One Click Cleaner (2.5)
Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.
Product Overview
One Click Cleaner (2.5) is part of the fiber cleaning tool range built by Ever Expresslink Limited in Ningbo, China.
It is one of 3 items in this range. A typical application is cleaning bulkhead ports inside adapters and panels. What the range is built to give you there: 2.5 mm and 1.25 mm versions covering all mainstream ferrule sizes.
The problem it addresses is high loss blamed on cords and adapters when the real cause is contamination. A practical note that applies across this range: repeat once if inspection still shows contamination, then investigate further. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.
Key Benefits
- Supplied as One Click Cleaner (2.5), so the part you receive matches the designation you ordered against
- Small enough to live permanently in a test kit
- One-click tools that reach inside adapters where wipes cannot
- Hundreds of cleans from a single tool, so cost per clean is negligible
- 2.5 mm and 1.25 mm versions covering all mainstream ferrule sizes
Problems It Solves
- Scratched end faces created by mating a dirty connector
- Cleaning attempted with whatever cloth was in the van
- Ports inside adapters that hand wipes cannot reach
- Repeat faults on the same port because it was never properly cleaned
Application Scenarios
- Routine cleaning during commissioning and handover
- Cleaning before every mating in a patch field
- First-line diagnosis of a high-loss port
- Cleaning bulkhead ports inside adapters and panels
Who It Is For
- Data-center and patch field operators
- Assembly benches and repair workshops
- Splicing teams working in closures
- Anyone handing over a certified link
Technical Features
- 2.5 mm version for SC, FC, ST and E2000
- 1.25 mm version for LC and MU
- Cleans both connector ends and bulkhead ports
- High click count per tool
Materials
- Engineering plastic body
- Woven cleaning tape cartridge
- Spring-loaded advance mechanism
Specifications
| Product Designation | One click cleaner(2.5) |
|---|---|
| Product Family | Fiber Cleaning Tool |
| Manufactured In | Ningbo, China |
| Warranty | One year against defects in materials and workmanship |
Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.
Manufacturing Process
- Body molding and mechanism assembly
- Cleaning tape loading and tension setting
- Click count and advance verification
- Function sampling per lot
- Packing
Quality Control
- Click count verified on sample units
- Cleaning effectiveness tested against contaminated reference ferrules
- Tape advance and tension checked per lot
- Mechanism durability sampling
- Packing count verified before dispatch
Customization Options
- Ferrule size version
- Click count per tool
- Kitted with wipes, solvent and inspection scope
- Bulk packs for rollout programs
- Private-label packaging
Handling One Click Cleaner (2.5)
Before You Order
- Clean before every mating, including on connectors straight out of the bag
- Insert square and press until the mechanism clicks once
- Inspect after cleaning rather than assuming it worked
In Service
- Repeat once if inspection still shows contamination, then investigate further
- Clean the adapter port as well as the connector, not just one side
- Replace the tool when the click count is exhausted
Questions About One Click Cleaner (2.5)
What do you need from us to quote One Click Cleaner (2.5)?
The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.
How many cleans does one tool give?
Several hundred per tool depending on the model, which makes the cost per clean negligible compared with a return visit for a fault that cleaning would have fixed.
Can these clean inside a bulkhead adapter?
Yes, that is the main reason to use a click tool rather than a wipe. The tip reaches the ferrule inside the adapter, which is exactly where wipes cannot go.
Wet or dry cleaning?
These are dry-cleaning tools and leave no residue. Heavy contamination sometimes needs a solvent and wipe first, followed by a dry clean to remove any remaining film.
Do I really need to clean a brand new connector?
Yes. Caps protect against damage but do not guarantee a clean end face, and a new cord is one of the most common sources of contamination in a patch field.
Guides Cases and Industries
How to Clean and Inspect Fiber Optic Connectors
Most high-loss ports are dirty, not faulty. The inspect, clean, inspect cycle and why new connectors are not exempt.
Process GuideInsertion Loss and Return Loss Explained
Two numbers on every test report, what each one is telling you, and how to build a link budget that survives being maintained.
Installation GuideInstalling Field Assembly Fast Connectors
A step by step method, the cleave quality that decides the result, and an honest account of what you trade against a fusion splice.
Deployment ProfileCentral Office ODF Consolidation
Turning a fiber plant that grew without a frame into one a new engineer can read
Deployment ProfileCampus Backbone Connector Migration
Phasing a legacy ST or FC estate onto SC and LC equipment without cutting anything
IndustryData Center and Enterprise LAN
High-density patching, structured cabling and building-to-building links
Request Pricing For One Click Cleaner (2.5)
Tell us the quantity and destination. If you are matching a part you already buy, send the sample and we will quote against it.