EL-DVP-105
EL-DVP-105 is part of the test equipment range built by Ever Expresslink Limited in Ningbo, China.
Splicers, meters, identifiers and inspection tools for people who have to prove the link works
Interested in EL-DVP-105
Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.
Product Overview
EL-DVP-105 is part of the test equipment range built by Ever Expresslink Limited in Ningbo, China.
It is one of 15 items in this range. A typical application is fusion splicing outside plant and drop cable. What the range is built to give you there: inspection that turns contamination from a theory into a picture.
The problem it addresses is links handed over with no measured evidence that they meet the budget. A practical note that applies across this range: set a reference with the same cords you will use for the measurement. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.
Key Benefits
- Supplied as EL-DVP-105, so the part you receive matches the designation you ordered against
- Faster fault localisation than route walking
- Fiber identification before anyone cuts anything
- Consistent splice quality independent of who is on shift
- Inspection that turns contamination from a theory into a picture
Problems It Solves
- Live fibres cut because nobody checked whether traffic was present
- Splice quality that varies with the technician and the weather
- Contamination diagnosed by guesswork instead of by inspection
- Links handed over with no measured evidence that they meet the budget
Application Scenarios
- Certifying a newly installed link against its budget
- Localising a break during an emergency restoration
- Identifying the live fiber in a congested closure
- Fusion splicing outside plant and drop cable
Who It Is For
- Training centers teaching fiber practice
- Installation contractors certifying completed links
- Network maintenance and restoration crews
- Splicing teams working on outside plant
Technical Features
- Fusion splicers with automatic alignment and loss estimation
- Optical power meters and light sources for loss measurement
- Fiber identifiers for detecting traffic without disconnecting
- Video inspection scopes for end-face examination
Materials
- Impact-resistant instrument housings
- Precision optical detectors and sources
- Rechargeable battery packs
- Carrying cases and tool boxes
Specifications
| Product Designation | EL-DVP-105 |
|---|---|
| Product Family | Test Equipment |
| Manufactured In | Ningbo, China |
| Warranty | One year against defects in materials and workmanship |
Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.
Manufacturing Process
- Instrument assembly and calibration
- Optical reference calibration against traceable standards
- Functional and battery endurance testing
- Firmware loading and verification where applicable
- Packing with accessories, case and documentation
Quality Control
- Calibration verified against reference standards before shipment
- Functional test of every measurement mode
- Battery charge and endurance verification
- Drop and handling sampling on portable units
- Accessory and case contents verified before dispatch
Customization Options
- Wavelength and measurement range
- Connector interface on meters and sources
- Kit contents and tool box configuration
- Carrying case format
- Calibration documentation on request
Handling EL-DVP-105
Before You Order
- Set a reference with the same cords you will use for the measurement
- Clean and inspect every connector before it goes into a test setup
- Use a fiber identifier before cutting or disconnecting anything
In Service
- Record wavelength, reference method and cord type with every result
- Keep instruments calibrated on a documented schedule
- Store batteries charged and instruments capped between jobs
Questions About EL-DVP-105
What do you need from us to quote EL-DVP-105?
The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.
Why use a fiber identifier?
To find out whether a fiber is carrying traffic before you touch it. Cutting a live fiber because the records were wrong is expensive, and identification takes seconds.
Do the fusion splicers handle drop cable and ribbon?
Splicer capability varies by model. Tell us what cable types your crews actually splice and we will confirm which model covers them, rather than you discovering a limit on site.
Is calibration documentation available?
Calibration documentation can be supplied with measurement instruments on request. Say so on the order, because it is normally prepared at dispatch.
Can you supply complete tool kits rather than individual instruments?
Yes. Optical tool boxes are supplied as working kits, which is usually more practical than assembling a kit from separately sourced items.
More Test Equipment
KL08C Optical Tool Box
Used for identifying the live fiber in a congested closure.
View Details
Fiber Video Scope
Used for localising a break during an emergency restoration.
View Details
BD501
Used for identifying the live fiber in a congested closure.
View Details
BD502
Used for fusion splicing outside plant and drop cable.
View DetailsGuides Cases and Industries
Choosing a Fiber Media Converter
Single fiber or dual fiber, fixed optics or SFP, standalone or chassis: four decisions that determine whether the link works and whether it scales.
Troubleshooting ArticlePower Meter and OTDR Testing Basics
Two instruments that answer different questions, why you need both, and what to write down so the result means something later.
Buying GuideHow to Select a Fiber Optic Attenuator
Measure first, attenuate on the receive side, and record what you installed. The three rules that prevent most attenuator mistakes.
Deployment ProfileField Drop Termination Without A Splicer
Terminating a subscriber drop with a cleaver and a hand tool, and knowing what that trade costs
Deployment ProfileCentral Office ODF Consolidation
Turning a fiber plant that grew without a frame into one a new engineer can read
IndustryData Center and Enterprise LAN
High-density patching, structured cabling and building-to-building links
IndustryTest Measurement and OEM Integration
Component-level supply for instrument builders and cable assembly houses
Request Pricing For EL-DVP-105
Tell us the quantity and destination. If you are matching a part you already buy, send the sample and we will quote against it.