LC Boot

Name: LC Boot
Brand: Ever Expresslink
SKU: lc-boot-346

Accessories

LC Boot is part of the accessories range built by Ever Expresslink Limited in Ningbo, China. It is built on the LC (Lucent Connector) interface.

The consumables and small parts an installation actually runs out of

Interested in LC Boot

Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.

Request A Quote Request A Sample

Product Overview

LC Boot is part of the accessories range built by Ever Expresslink Limited in Ningbo, China. It is built on the LC (Lucent Connector) interface.

Small form-factor transceivers are built around it, so LC is what a data-center or an access switch presents to you whether you wanted it or not. The latch is small and breaks if the cord is pulled sideways out of a dense panel. Use a boot or a push-pull tab on panels packed to 48 ports and above.

It is one of 11 items in this range. A typical application is polishing connectors on an assembly bench. What the range is built to give you there: one order covers hardware and the consumables that go with it.

The problem it addresses is jobs halted because a consumable ran out mid-shift. A practical note that applies across this range: restock van kits on a schedule rather than when they run out. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.

Key Benefits

Supplied as LC Boot, so the part you receive matches the designation you ordered against
Ribbon and single-fiber variants of the same consumable
Consumables sized to match the trays and hardware in the same catalog
One order covers hardware and the consumables that go with it
Bulk packing suited to a rollout rather than a single job

Problems It Solves

Splice sleeves that do not match the tray holders in use
Boots and saddles sourced from different suppliers with different tolerances
Cable routing improvised with whatever is on the van
Polishing film grit sequences mixed up between benches

Application Scenarios

Data-center structured cabling
Loading splice trays during closure and ODF work
Protecting fusion splices in the field
Routing and securing cable along a wall or in a rack
Polishing connectors on an assembly bench

Who It Is For

Splicing and installation crews
Cable assembly houses
ODF and box assembly benches
Maintenance and restoration teams

Technical Features

LC (Lucent Connector) interface
The latch is small and breaks if the cord is pulled sideways out of a dense panel. Use a boot or a push-pull tab on panels packed to 48 ports and above.
Metal ferrules and polishing film for assembly benches
Heat-shrink splice protection in single-fiber and ribbon versions
Splice trays and integrative trays sized for standard holders
Connector boots and strain-relief parts

Materials

Cross-linked polyolefin and steel rod on splice sleeves
Thermoplastic trays, boots and saddles
Stainless and copper alloy ferrules
Coated abrasive polishing film

Specifications

Product Designation	LC boot
Product Family	Accessories
Connector Interface	LC (Lucent Connector)
Manufactured In	Ningbo, China
Warranty	One year against defects in materials and workmanship

Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.

Manufacturing Process

Component production against dimensional specification
Incoming material verification
Sizing checks against the matching hardware
Bulk counting and packing
Lot identification and labeling

Quality Control

Shrink performance sampled per lot on splice sleeves
Tray fit verified against standard holders
Boot and saddle dimensional sampling
Polishing film grit verification per lot
Pack count verified before dispatch

Customization Options

Sleeve length and ribbon or single-fiber format
Tray capacity and format
Boot color and size
Bulk pack quantities to suit your consumption
Private-label packaging for distributors

Compared With Other Options

SC	SC is more forgiving to handle; LC fits twice the ports per rack unit
MTRJ	MTRJ carries a duplex pair in one ferrule; LC keeps the two fibres separately serviceable

Use Guide

Handling LC Boot

Before You Order

Match sleeve length to the tray holders you actually use
Follow the stated shrink temperature and time rather than guessing
Keep polishing film grit sequences separated and labeled on the bench

In Service

Use saddles at the spacing the cable's bend radius requires
Store consumables dry and within their shelf life
Restock van kits on a schedule rather than when they run out

FAQ

Questions About LC Boot

What do you need from us to quote LC Boot?

The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.

Can LC Boot be supplied with a different connector interface?

Yes. LC (Lucent Connector) is what this designation carries, and the same family is stocked across the other mainstream connector standards. Tell us the port you have to mate with and we will confirm the equivalent part.

Can consumables be ordered in bulk pack quantities?

Yes, and that is usually the sensible way to buy them. Tell us your monthly consumption and we will quote the pack size and price break that fits.

Do you supply polishing film for assembly benches?

Yes, including the grit grades used in standard connector polishing sequences. Tell us your process and ferrule type and we will confirm the grades.

Can accessories be private labeled?

Yes, on volume orders, which is common for distributors supplying their own branded installation kits.