SC/PC-SC/PC 62.5/125 MM Simplex Patchcord

Name: SC/PC-SC/PC 62.5/125 MM Simplex Patchcord
Brand: Ever Expresslink
SKU: sc-pc-sc-pc-62-5-125-mm-simplex-patchcord-191

Fiber Optic PatchcordPCMultimode 62.5/125Simplex

SC/PC-SC/PC 62.5/125 MM Simplex Patchcord is part of the fiber optic patchcord range built by Ever Expresslink Limited in Ningbo, China. It is built on the SC (Subscriber Connector) interface.

Factory-terminated jumpers that turn a planned link budget into a working one

Interested in SC/PC-SC/PC 62.5/125 MM Simplex Patchcord

Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.

Request A Quote Request A Sample

Product Overview

SC/PC-SC/PC 62.5/125 MM Simplex Patchcord is part of the fiber optic patchcord range built by Ever Expresslink Limited in Ningbo, China. It is built on the SC (Subscriber Connector) interface.

SC fiber cable is one of the earliest stype and one of the most commonly used fiber optic cable, it is convenient to use and cost saving - It is the most cheapest type fiber optic cable. SC fiber patch is widely uesed in fiber optic networks. SC fiber patch cable is with zirconia sleeve and plastic housing.

It is the workhorse of FTTH and passive optical distribution: a technician can seat a port blind, inside a closure, wearing gloves, without rotating anything. SC bodies clip together into duplex pairs. Check polarity before you clip, because a reversed duplex clip is easy to build and hard to spot in a cabinet.

62.5/125 µm multimode is the older OM1 core size, still present in large installed building backbones. Specify it when you are patching into an existing 62.5/125 plant and core mismatch would cost you more than the cord does.

PC is the baseline physical-contact polish, with a lighter dome than UPC. It appears on older plant and on multimode links where return loss is not the limiting factor.

Also Searched As

SC-LCSC-STSC-FCSC-MUSC-MT-RJSC-E20009/12550/12562.5/125simplexduplex

Key Benefits

Supplied as SC/PC-SC/PC 62.5/125 MM Simplex Patchcord, so the part you receive matches the designation you ordered against
PC end face: It appears on older plant and on multimode links where return loss is not the limiting factor.
Multimode 62.5/125 at 62.5/125 µm: Specify it when you are patching into an existing 62.5/125 plant and core mismatch would cost you more than the cord does.
Simplex construction: A single fiber in one jacket, terminated at both ends. Use it for one-way paths, for monitoring taps and wherever a duplex pair would just be waste.
One supplier for every mainstream connector, polish and fiber-mode combination
Custom lengths, so cable management does not depend on coiling two spare meters behind a rack

Problems It Solves

Long lead times on non-standard lengths, which stall a commissioning window
Link budgets that pass on paper and fail on site because connector loss was assumed rather than measured
Cords that drift out of spec after repeated re-patching in an active patch field
Mixed connector estates where the equipment port and the distribution frame never match

Application Scenarios

Telecommunications
CATV
LAN
Enterprise backbone links
Patching optical line terminals to splitter shelves inside a central office
Connecting transceivers to an optical distribution frame in a data hall

Who It Is For

OEM equipment makers bundling cords with their own hardware
FTTH and access network operators patching between splitter shelves and subscriber feeds
Data-center and enterprise cabling contractors building out patch fields
System integrators commissioning transmission and monitoring equipment

Technical Features

SC (Subscriber Connector) interface
SC bodies clip together into duplex pairs. Check polarity before you clip, because a reversed duplex clip is easy to build and hard to spot in a cabinet.
Multimode 62.5/125 fiber at 62.5/125 µm
Bend-controlled boot to protect the fiber at the connector exit
Jacket and boot color coded by polish type for quick field identification
Individually bagged and end-capped so end faces stay clean until installation
Zirconia ceramic ferrule with pre-polished end face

Materials

Zirconia ceramic ferrule
Copper alloy or stainless coupling hardware
PVC, LSZH or OFNP jacket depending on the building code that applies
Aramid yarn strength members
Thermoplastic boot and housing

Specifications

Product Designation	SC/PC-SC/PC 62.5/125 MM SIMPLEX PATCHCORD
Product Family	Fiber Optic Patchcord
Connector Interface	SC (Subscriber Connector)
End Face Polish	PC
Fiber Mode	Multimode 62.5/125 (62.5/125 µm)
Core/Cladding	62.5/125 um
Cable Structure	Simplex
Referenced Standards	IEC 61 754-4; TIA/EIA 604-3-A
Manufactured In	Ningbo, China
Warranty	One year against defects in materials and workmanship

Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.

Manufacturing Process

Fiber and connector kitting against the works order
Epoxy injection and fiber insertion into the ferrule
Oven curing of the epoxy bond
Cleave and multi-stage polish to the specified end-face profile
Interferometric and visual end-face inspection
Insertion loss and return loss test on every unit
End-cap fitting, labeling and individual bagging

Quality Control

End-face geometry inspection before the cord is allowed to be tested
Insertion loss and return loss measured per assembly, not per batch
Tensile and side-pull checks on sample units from each production run
Visual inspection for jacket damage, boot seating and label accuracy
Final cleanliness check and end-cap fitting before packing

Customization Options

Any length from short equipment jumpers to long riser runs
Mixed connector types on each end for equipment-to-frame transitions
UPC or APC polish specified per end
PVC, LSZH, armoured or outdoor-rated jacket
Custom boot colors, jacket printing and private-label packaging

Compared With Other Options

LC	LC is half the footprint and doubles port density; SC is easier to handle in a crowded closure
FC	FC's threaded nut resists vibration; SC is faster to patch and re-patch
APC version	APC adds an eight degree angle so reflections leave the core, which matters on PON, CATV and RF-over-glass paths. It is not interchangeable with this part.
Single mode version	Single mode costs more at the transceiver but carries reach and upgrade headroom that multimode cannot.

Use Guide

Handling SC/PC-SC/PC 62.5/125 MM Simplex Patchcord

Before You Order

Confirm the connector type and polish at both ends against the equipment and the frame
Confirm fiber mode and core size match the installed plant end to end
Inspect and clean both end faces before every mating, including on a new cord

In Service

Seat the connector fully until the latch or nut engages, then verify with a power meter
Keep the bend radius above the cord's rated minimum through the whole route
Re-cap any cord taken out of service instead of leaving the ferrule exposed

FAQ

Questions About SC/PC-SC/PC 62.5/125 MM Simplex Patchcord

What do you need from us to quote SC/PC-SC/PC 62.5/125 MM Simplex Patchcord?

The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.

Can SC/PC-SC/PC 62.5/125 MM Simplex Patchcord be supplied with a different connector interface?

Yes. SC (Subscriber Connector) is what this designation carries, and the same family is stocked across the other mainstream connector standards. Tell us the port you have to mate with and we will confirm the equivalent part.

Is SC/PC-SC/PC 62.5/125 MM Simplex Patchcord available in the other fiber mode?

This item is multimode 62.5/125. Do not mix 62.5/125 cords into a 50/125 channel. Keep the two core sizes physically separated and labeled. The corresponding version in the other fiber mode is available; confirm the installed plant at both ends before ordering.

Can I order non-standard lengths?

Yes. Cords are cut and terminated to the length on your order rather than to a fixed catalog ladder, which is usually cheaper than buying long cords and coiling the slack.

What is the difference between UPC and APC on a patch cord?

UPC uses a domed end face for direct core contact. APC adds an eight degree angle so reflected light leaves the core, which matters on PON and RF-over-glass paths. APC cords are green, UPC cords are blue, and the two must not be mated to each other.