3/8" Super Flex Feeder
3/8" Super Flex Feeder is part of the coaxial cable range built by Ever Expresslink Limited in Ningbo, China.
Feeder and data cable for RF distribution and structured copper runs
Interested in 3/8" Super Flex Feeder
Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.
Product Overview
3/8" Super Flex Feeder is part of the coaxial cable range built by Ever Expresslink Limited in Ningbo, China.
It is one of 3 items in this range. A typical application is structured copper cabling runs in a building. What the range is built to give you there: data cable supplied from the same source as the RF lines.
The problem it addresses is feeder runs whose loss was never calculated before the cable was ordered. A practical note that applies across this range: support the run at the manufacturer's stated spacing. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.
Key Benefits
- Supplied as 3/8" Super Flex Feeder, so the part you receive matches the designation you ordered against
- Consistent impedance along the run
- Data cable supplied from the same source as the RF lines
- Drum lengths suited to a project rather than a repair
- Super flex construction that routes in tight spaces
Problems It Solves
- Water ingress into a feeder run that was not properly sealed
- Mixed cable types in one system with different impedance
- Data cable that fails certification after installation
- Feeder runs whose loss was never calculated before the cable was ordered
Application Scenarios
- Structured copper cabling runs in a building
- Jumper fabrication at the equipment end
- Mast and rooftop feeder runs to antennas
- In-building distributed antenna systems
Who It Is For
- Distributors supplying RF installation crews
- Wireless and mobile network installation contractors
- Broadcast and CATV network builders
- Building services and structured cabling teams
Technical Features
- Category rated data cable for structured runs
- Standard drum lengths
- Compatible with the matching connector range
- 1/2 inch and 3/8 inch super flex feeder sizes
Materials
- Copper conductor and outer conductor
- Foam dielectric on feeder cable
- PE or LSZH jacket
- Twisted-pair copper construction on data cable
Specifications
| Product Designation | 3/8" super flex feeder |
|---|---|
| Product Family | Coaxial Cable |
| Manufactured In | Ningbo, China |
| Warranty | One year against defects in materials and workmanship |
Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.
Manufacturing Process
- Conductor drawing and dielectric forming
- Outer conductor corrugation and jacketing
- Continuous impedance and sweep testing
- Drum winding and length marking
- Packing and labeling
Quality Control
- Impedance and return loss swept along the run
- Attenuation verified against specification per lot
- Jacket integrity and marking verified
- Bend radius performance sampled
- Drum length verified before dispatch
Customization Options
- Cable size and construction
- Jacket material and rating
- Drum length
- Pre-cut and pre-connectorised jumper assemblies
- Custom jacket printing on volume orders
Handling 3/8" Super Flex Feeder
Before You Order
- Calculate the loss over the actual route length before ordering
- Respect the cable's minimum bend radius, including at the connector
- Seal every outdoor connection against water ingress
In Service
- Support the run at the manufacturer's stated spacing
- Sweep the completed run rather than assuming it is good
- Keep impedance consistent through every part of the system
Questions About 3/8" Super Flex Feeder
What do you need from us to quote 3/8" Super Flex Feeder?
The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.
What is super flex feeder and when should I use it?
It is a corrugated feeder built to bend more tightly than standard feeder of the same size. Use it where the route has real obstructions and a standard cable would need a longer path or extra jumpers.
How do I choose between 1/2 inch and 3/8 inch?
Larger cable has lower loss and a larger bend radius. Work out the loss over the actual route at your operating frequency, then take the smallest size that still leaves margin.
Do you supply pre-terminated jumpers?
Yes, jumper assemblies can be supplied cut and connectorised with the matching connector range, which removes the most error-prone step from the site work.
What drum lengths are available?
Standard drum lengths are stocked and custom lengths can be cut for a project. Tell us the total run length and the number of runs and we will advise the most economical drum size.
Guides Cases and Industries
Request Pricing For 3/8" Super Flex Feeder
Tell us the quantity and destination. If you are matching a part you already buy, send the sample and we will quote against it.