Face Plate (Ref 436)
Face Plate (Ref 436) is part of the face plate range built by Ever Expresslink Limited in Ningbo, China.
Wall outlets that present a fiber port where the user actually is
Interested in Face Plate (Ref 436)
Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.
Product Overview
Face Plate (Ref 436) is part of the face plate range built by Ever Expresslink Limited in Ningbo, China.
It is one of 11 items in this range. A typical application is laboratory and test bench fiber presentation. What the range is built to give you there: formats to suit both 86 type and international wall box standards.
The problem it addresses is ports left open and collecting dust in an occupied office. A practical note that applies across this range: tighten fixing screws evenly so the plate sits flat. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.
Key Benefits
- Supplied as Face Plate (Ref 436), so the part you receive matches the designation you ordered against
- Formats to suit both 86 type and international wall box standards
- Adapter positions for SC, LC and MT-RJ in simplex and duplex
- Space behind the plate designed for the fiber's bend radius
- Shuttered or capped ports to keep dust out before commissioning
Problems It Solves
- Adapter formats that cannot be changed without replacing the plate
- Outlet formats that do not match the local wall box standard
- Fiber bent too tightly in the shallow space behind a plate
- Ports left open and collecting dust in an occupied office
Application Scenarios
- Media and broadcast facility wall outlets
- Retrofitting fiber into an existing structured cabling estate
- Fiber to the desk in an office fit-out
- In-home fiber outlets in a residential build
Who It Is For
- Facilities teams maintaining installed outlets
- Structured cabling contractors
- Office and commercial fit-out teams
- MDU and residential fiber installers
Technical Features
- Simplex, duplex and multi-port adapter positions
- Snap-in adapter mounting for later reconfiguration
- Dust shutters or port caps
- Wall box and surface mount options
Materials
- ABS or PC plate body
- Ceramic or bronze sleeve adapters
- Thermoplastic shutters
- Steel mounting screws
Specifications
| Product Designation | face plate |
|---|---|
| Product Family | Face Plate |
| Manufactured In | Ningbo, China |
| Warranty | One year against defects in materials and workmanship |
Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.
Manufacturing Process
- Plate molding and finishing
- Adapter aperture verification
- Shutter mechanism fitting
- Fit test against standard wall boxes
- Packing with screws and labels
Quality Control
- Wall box fit verified against the stated standard
- Adapter retention force sampled
- Shutter cycling on samples
- Finish and color consistency checked per lot
- Packing count verified before dispatch
Customization Options
- Plate format and port count
- Adapter type and polish
- Plate color and finish
- Shuttered or capped ports
- Custom port labeling and private-label packaging
Handling Face Plate (Ref 436)
Before You Order
- Confirm the wall box standard before ordering plate format
- Leave a service loop in the wall box within the fiber's bend radius
- Fit dust shutters or caps and leave them closed until commissioning
In Service
- Label ports at install so moves and changes stay traceable
- Tighten fixing screws evenly so the plate sits flat
- Clean the port before every patch, the same as on a panel
Questions About Face Plate (Ref 436)
What do you need from us to quote Face Plate (Ref 436)?
The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.
Can plates be supplied in custom colors?
Yes, on volume orders, so the fiber outlets match the electrical accessories already installed in the building.
Which wall box standards are supported?
Plates are available in 86 type and in international formats. Measure the installed wall box before ordering, because plate format is the item most often got wrong on a retrofit.
Can the adapter type be changed later?
On snap-in versions, yes. The adapter can be swapped without replacing the plate, which is useful when equipment changes from SC to LC during a refresh.
Is there room for a service loop behind the plate?
There is space designed for a loop within the fiber's bend radius, but it depends on the wall box depth. Deep boxes are strongly preferred for fiber outlets.
More Face Plate
MT-RJ
Used for retrofitting fiber into an existing structured cabling estate.
View Details
LC (Ref 362)
Used for in-home fiber outlets in a residential build.
View Details
ELF001
Used for fiber to the desk in an office fit-out.
View Details
ELF002
Used for media and broadcast facility wall outlets.
View DetailsGuides Cases and Industries
ODF Terminal Box and FTTH Termination Box Compared
Three enclosures that all hold fiber and adapters, separated by where they sit in the network and who opens them.
Deployment ProfileMDU Riser Fiber Distribution
Distributing fiber up an apartment riser so units can be connected one at a time without disturbing the rest
IndustryData Center and Enterprise LAN
High-density patching, structured cabling and building-to-building links
Request Pricing For Face Plate (Ref 436)
Tell us the quantity and destination. If you are matching a part you already buy, send the sample and we will quote against it.