MT-RJ

Name: MT-RJ
Brand: Ever Expresslink
SKU: mtrj-361

Face Plate

MT-RJ is part of the face plate range built by Ever Expresslink Limited in Ningbo, China. It is built on the MT-RJ interface.

Wall outlets that present a fiber port where the user actually is

Interested in MT-RJ

Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.

Request A Quote Request A Sample

Product Overview

MT-RJ is part of the face plate range built by Ever Expresslink Limited in Ningbo, China. It is built on the MT-RJ interface.

MT-RJ holds two fibres in a single rectangular MT ferrule with guide pins, in an RJ-sized latching body. It gives a duplex link in one small connector, so it turned up widely in office LAN equipment and faceplate outlets.

It is one of 11 items in this range. A typical application is laboratory and test bench fiber presentation. What the range is built to give you there: formats to suit both 86 type and international wall box standards.

The problem it addresses is outlet formats that do not match the local wall box standard. A practical note that applies across this range: clean the port before every patch, the same as on a panel. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.

Key Benefits

Supplied as MT-RJ, so the part you receive matches the designation you ordered against
Shuttered or capped ports to keep dust out before commissioning
Finishes that sit alongside standard electrical accessories
Formats to suit both 86 type and international wall box standards
Adapter positions for SC, LC and MT-RJ in simplex and duplex

Problems It Solves

Plates that do not match the electrical accessories already installed
Adapter formats that cannot be changed without replacing the plate
Outlet formats that do not match the local wall box standard
Fiber bent too tightly in the shallow space behind a plate

Application Scenarios

Legacy duplex equipment ports
Media and broadcast facility wall outlets
Retrofitting fiber into an existing structured cabling estate
Fiber to the desk in an office fit-out
In-home fiber outlets in a residential build

Who It Is For

Office and commercial fit-out teams
MDU and residential fiber installers
Data-center and lab bench cabling teams
Facilities teams maintaining installed outlets

Technical Features

MT-RJ interface
Male and female variants differ by the presence of guide pins. Ordering the wrong gender is the usual MT-RJ mistake.
Wall box and surface mount options
86 type and international plate formats
Simplex, duplex and multi-port adapter positions
Snap-in adapter mounting for later reconfiguration

Materials

ABS or PC plate body
Ceramic or bronze sleeve adapters
Thermoplastic shutters
Steel mounting screws

Specifications

Product Designation	MTRJ
Product Family	Face Plate
Connector Interface	MT-RJ
Manufactured In	Ningbo, China
Warranty	One year against defects in materials and workmanship

Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.

Manufacturing Process

Plate molding and finishing
Adapter aperture verification
Shutter mechanism fitting
Fit test against standard wall boxes
Packing with screws and labels

Quality Control

Wall box fit verified against the stated standard
Adapter retention force sampled
Shutter cycling on samples
Finish and color consistency checked per lot
Packing count verified before dispatch

Customization Options

Plate format and port count
Adapter type and polish
Plate color and finish
Shuttered or capped ports
Custom port labeling and private-label packaging

Compared With Other Options

LC	LC keeps each fiber independently serviceable; MT-RJ saves space by combining both
MPO	MPO extends the same MT ferrule idea to 12 or 24 fibres for trunk use

Use Guide

Handling MT-RJ

Before You Order

Confirm the wall box standard before ordering plate format
Leave a service loop in the wall box within the fiber's bend radius
Fit dust shutters or caps and leave them closed until commissioning

In Service

Label ports at install so moves and changes stay traceable
Tighten fixing screws evenly so the plate sits flat
Clean the port before every patch, the same as on a panel

FAQ

Questions About MT-RJ

What do you need from us to quote MT-RJ?

The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.

Can MT-RJ be supplied with a different connector interface?

Yes. MT-RJ is what this designation carries, and the same family is stocked across the other mainstream connector standards. Tell us the port you have to mate with and we will confirm the equivalent part.

Which wall box standards are supported?

Plates are available in 86 type and in international formats. Measure the installed wall box before ordering, because plate format is the item most often got wrong on a retrofit.

Can the adapter type be changed later?

On snap-in versions, yes. The adapter can be swapped without replacing the plate, which is useful when equipment changes from SC to LC during a refresh.

Is there room for a service loop behind the plate?

There is space designed for a loop within the fiber's bend radius, but it depends on the wall box depth. Deep boxes are strongly preferred for fiber outlets.