KL08C Optical Tool Box
KL08C Optical Tool Box is part of the test equipment range built by Ever Expresslink Limited in Ningbo, China.
Splicers, meters, identifiers and inspection tools for people who have to prove the link works
Interested in KL08C Optical Tool Box
Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.
Product Overview
KL08C Optical Tool Box is part of the test equipment range built by Ever Expresslink Limited in Ningbo, China.
It is one of 15 items in this range. A typical application is fusion splicing outside plant and drop cable. What the range is built to give you there: measured evidence for handover rather than an assurance.
The problem it addresses is contamination diagnosed by guesswork instead of by inspection. A practical note that applies across this range: use a fiber identifier before cutting or disconnecting anything. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.
Key Benefits
- Supplied as KL08C Optical Tool Box, so the part you receive matches the designation you ordered against
- Inspection that turns contamination from a theory into a picture
- Measured evidence for handover rather than an assurance
- Faster fault localisation than route walking
- Fiber identification before anyone cuts anything
Problems It Solves
- Live fibres cut because nobody checked whether traffic was present
- Splice quality that varies with the technician and the weather
- Contamination diagnosed by guesswork instead of by inspection
- Links handed over with no measured evidence that they meet the budget
Application Scenarios
- Fusion splicing outside plant and drop cable
- Inspecting end faces on an assembly bench
- Certifying a newly installed link against its budget
- Localising a break during an emergency restoration
Who It Is For
- Installation contractors certifying completed links
- Network maintenance and restoration crews
- Splicing teams working on outside plant
- Laboratories and equipment manufacturers
Technical Features
- Tool boxes that carry a complete working kit
- Fusion splicers with automatic alignment and loss estimation
- Optical power meters and light sources for loss measurement
- Fiber identifiers for detecting traffic without disconnecting
Materials
- Impact-resistant instrument housings
- Precision optical detectors and sources
- Rechargeable battery packs
- Carrying cases and tool boxes
Specifications
| Product Designation | KL08C Optical tool box |
|---|---|
| Product Family | Test Equipment |
| Manufactured In | Ningbo, China |
| Warranty | One year against defects in materials and workmanship |
Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.
Manufacturing Process
- Instrument assembly and calibration
- Optical reference calibration against traceable standards
- Functional and battery endurance testing
- Firmware loading and verification where applicable
- Packing with accessories, case and documentation
Quality Control
- Calibration verified against reference standards before shipment
- Functional test of every measurement mode
- Battery charge and endurance verification
- Drop and handling sampling on portable units
- Accessory and case contents verified before dispatch
Customization Options
- Wavelength and measurement range
- Connector interface on meters and sources
- Kit contents and tool box configuration
- Carrying case format
- Calibration documentation on request
Handling KL08C Optical Tool Box
Before You Order
- Set a reference with the same cords you will use for the measurement
- Clean and inspect every connector before it goes into a test setup
- Use a fiber identifier before cutting or disconnecting anything
In Service
- Record wavelength, reference method and cord type with every result
- Keep instruments calibrated on a documented schedule
- Store batteries charged and instruments capped between jobs
Questions About KL08C Optical Tool Box
What do you need from us to quote KL08C Optical Tool Box?
The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.
Why use a fiber identifier?
To find out whether a fiber is carrying traffic before you touch it. Cutting a live fiber because the records were wrong is expensive, and identification takes seconds.
Do the fusion splicers handle drop cable and ribbon?
Splicer capability varies by model. Tell us what cable types your crews actually splice and we will confirm which model covers them, rather than you discovering a limit on site.
Is calibration documentation available?
Calibration documentation can be supplied with measurement instruments on request. Say so on the order, because it is normally prepared at dispatch.
Can you supply complete tool kits rather than individual instruments?
Yes. Optical tool boxes are supplied as working kits, which is usually more practical than assembling a kit from separately sourced items.
More Test Equipment
BD501
Used for identifying the live fiber in a congested closure.
View Details
BD502
Used for fusion splicing outside plant and drop cable.
View Details
EL-DVP-105
Used for fusion splicing outside plant and drop cable.
View Details
EL-SI-01
Used for identifying the live fiber in a congested closure.
View DetailsGuides Cases and Industries
How to Select a Fiber Optic Attenuator
Measure first, attenuate on the receive side, and record what you installed. The three rules that prevent most attenuator mistakes.
Maintenance GuideHow to Clean and Inspect Fiber Optic Connectors
Most high-loss ports are dirty, not faulty. The inspect, clean, inspect cycle and why new connectors are not exempt.
Process GuideInsertion Loss and Return Loss Explained
Two numbers on every test report, what each one is telling you, and how to build a link budget that survives being maintained.
Deployment ProfileField Drop Termination Without A Splicer
Terminating a subscriber drop with a cleaver and a hand tool, and knowing what that trade costs
Deployment ProfileCentral Office ODF Consolidation
Turning a fiber plant that grew without a frame into one a new engineer can read
IndustryTelecom and Carrier Networks
Passive components for access, metro and transmission plant that has to stay up for decades
IndustryData Center and Enterprise LAN
High-density patching, structured cabling and building-to-building links
Request Pricing For KL08C Optical Tool Box
Tell us the quantity and destination. If you are matching a part you already buy, send the sample and we will quote against it.