Breakout Kit/Fanout Kit

Name: Breakout Kit/Fanout Kit
Brand: Ever Expresslink
SKU: breakout-kit-fanout-kit-430

Various PigtailFanout

Breakout Kit/Fanout Kit is part of the various pigtail range built by Ever Expresslink Limited in Ningbo, China.

Pre-terminated tails that put the factory end face inside your splice tray

Interested in Breakout Kit/Fanout Kit

Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.

Request A Quote Request A Sample

Product Overview

Breakout Kit/Fanout Kit is part of the various pigtail range built by Ever Expresslink Limited in Ningbo, China.

It is one of 12 items in this range. A typical application is emergency restoration of a damaged distribution cable. What the range is built to give you there: color-coded buffers that follow standard fiber identification.

The problem it addresses is splice trays loaded one fiber at a time when a bundle would do it in a single operation. A practical note that applies across this range: cap the connector until the frame side is ready to be patched. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.

Key Benefits

Supplied as Breakout Kit/Fanout Kit, so the part you receive matches the designation you ordered against
Fanout construction: A trunk broken out into individually jacketed legs, so each leg can be routed and serviced on its own.
Connector end face made and tested under factory conditions
Field work reduced to a fusion splice, which the splicer measures for you
Bundle versions load a twelve-fiber tray in one pass
Color-coded buffers that follow standard fiber identification

Problems It Solves

Field-terminated connectors whose loss varies with the weather and the technician
Splice trays loaded one fiber at a time when a bundle would do it in a single operation
Color coding that does not survive the transition from cable to tray
Pigtail tails too short to route properly inside a closure, forcing tight bends

Application Scenarios

Emergency restoration of a damaged distribution cable
Terminating feeder cable inside a dome or horizontal splice closure
Loading 12-fiber trays in a rack-mounted ODF
Splicing subscriber drops inside an FTTH termination box

Who It Is For

FTTH contractors terminating distribution cable into closures and boxes
ODF and patch panel builders loading splice trays at scale
Central office teams splicing onto backbone cable
Maintenance crews carrying repair kits for emergency restoration

Technical Features

Color-coded buffer following standard fiber identification order
Bundle and fan-out versions for multi-fiber trays
Waterproof versions for outdoor and direct-entry enclosures
Factory-polished ferrule with inspected end face

Materials

Zirconia ceramic ferrule
900 µm tight-buffered fiber or bare fiber tail
Aramid yarn reinforcement where the design carries load
Thermoplastic boot and housing
Furcation tubing on bundle versions

Specifications

Product Designation	breakout kit/Fanout kit
Product Family	Various Pigtail
Cable Structure	Fanout
Manufactured In	Ningbo, China
Warranty	One year against defects in materials and workmanship

Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.

Manufacturing Process

Fiber kitting and buffer color verification
Connector assembly, epoxy cure and polish
End-face inspection and loss measurement
Tail cutting to the ordered length and buffer stripping preparation
Bundling and furcation for multi-fiber versions
Coiling, labeling and individual packing

Quality Control

End-face geometry and cleanliness inspection on every connector
Insertion loss and return loss measurement before packing
Buffer color sequence verified against the order for bundles
Tail length verified against the works order
Waterproof versions pressure-checked on a sample basis

Customization Options

Tail length matched to the enclosure you are loading
Simplex, bundle, fan-out and waterproof formats
UPC or APC polish
Buffer color sequence to your own convention
Ribbon-compatible versions for mass fusion splicing

Use Guide

Handling Breakout Kit/Fanout Kit

Before You Order

Check buffer color against the tray plan before stripping anything
Strip, clean and cleave to the splicer's stated dimensions
Fusion splice and record the splicer's loss estimate

In Service

Protect the splice with a heat-shrink sleeve and seat it in the tray
Coil the tail inside the tray without dropping below the fiber's bend radius
Cap the connector until the frame side is ready to be patched

FAQ

Questions About Breakout Kit/Fanout Kit

What do you need from us to quote Breakout Kit/Fanout Kit?

The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.

Why use a pigtail instead of terminating the cable directly?

Because a factory-made end face is more repeatable than one polished in a closure. Splicing a pigtail on moves the difficult step indoors and leaves the field crew a fusion splice whose loss the machine reports.

What tail length should I order?

Long enough to route around the inside of your closure or tray without tight bends, and no longer. Tell us the enclosure you are loading and we will suggest a length that coils cleanly.

Do you supply bundle pigtails in standard color order?

Yes. Bundle and 12-fiber versions follow the standard fiber identification color sequence, and we can supply a different sequence if your plant uses its own convention.

Can I get APC pigtails for a PON build?

Yes. APC is normally what you want on PON and RF-over-glass distribution because the angled end face pushes reflections out of the core. Specify APC per order and the housings will be green.