One Click Cleaner (1.25)
One Click Cleaner (1.25) is part of the fiber cleaning tool range built by Ever Expresslink Limited in Ningbo, China.
The cheapest fix for the most common cause of optical loss
Interested in One Click Cleaner (1.25)
Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.
Product Overview
One Click Cleaner (1.25) is part of the fiber cleaning tool range built by Ever Expresslink Limited in Ningbo, China.
It is one of 3 items in this range. A typical application is cleaning before every mating in a patch field. What the range is built to give you there: hundreds of cleans from a single tool, so cost per clean is negligible.
The problem it addresses is repeat faults on the same port because it was never properly cleaned. A practical note that applies across this range: insert square and press until the mechanism clicks once. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.
Key Benefits
- Supplied as One Click Cleaner (1.25), so the part you receive matches the designation you ordered against
- Hundreds of cleans from a single tool, so cost per clean is negligible
- 2.5 mm and 1.25 mm versions covering all mainstream ferrule sizes
- Dry cleaning that leaves no residue on the end face
- Small enough to live permanently in a test kit
Problems It Solves
- High loss blamed on cords and adapters when the real cause is contamination
- Scratched end faces created by mating a dirty connector
- Cleaning attempted with whatever cloth was in the van
- Ports inside adapters that hand wipes cannot reach
Application Scenarios
- Routine cleaning during commissioning and handover
- Cleaning before every mating in a patch field
- First-line diagnosis of a high-loss port
- Cleaning bulkhead ports inside adapters and panels
Who It Is For
- Assembly benches and repair workshops
- Splicing teams working in closures
- Anyone handing over a certified link
- Field engineers and maintenance crews
Technical Features
- High click count per tool
- One-click mechanism with an internal cleaning tape
- 2.5 mm version for SC, FC, ST and E2000
- 1.25 mm version for LC and MU
Materials
- Engineering plastic body
- Woven cleaning tape cartridge
- Spring-loaded advance mechanism
Specifications
| Product Designation | One click cleaner(1.25) |
|---|---|
| Product Family | Fiber Cleaning Tool |
| Manufactured In | Ningbo, China |
| Warranty | One year against defects in materials and workmanship |
Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.
Manufacturing Process
- Body molding and mechanism assembly
- Cleaning tape loading and tension setting
- Click count and advance verification
- Function sampling per lot
- Packing
Quality Control
- Click count verified on sample units
- Cleaning effectiveness tested against contaminated reference ferrules
- Tape advance and tension checked per lot
- Mechanism durability sampling
- Packing count verified before dispatch
Customization Options
- Ferrule size version
- Click count per tool
- Kitted with wipes, solvent and inspection scope
- Bulk packs for rollout programs
- Private-label packaging
Handling One Click Cleaner (1.25)
Before You Order
- Clean before every mating, including on connectors straight out of the bag
- Insert square and press until the mechanism clicks once
- Inspect after cleaning rather than assuming it worked
In Service
- Repeat once if inspection still shows contamination, then investigate further
- Clean the adapter port as well as the connector, not just one side
- Replace the tool when the click count is exhausted
Questions About One Click Cleaner (1.25)
What do you need from us to quote One Click Cleaner (1.25)?
The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.
Do I really need to clean a brand new connector?
Yes. Caps protect against damage but do not guarantee a clean end face, and a new cord is one of the most common sources of contamination in a patch field.
Which size do I need?
2.5 mm covers SC, FC, ST and E2000. 1.25 mm covers LC and MU. Most working kits carry both, because a mixed estate will need both within the same day.
How many cleans does one tool give?
Several hundred per tool depending on the model, which makes the cost per clean negligible compared with a return visit for a fault that cleaning would have fixed.
Can these clean inside a bulkhead adapter?
Yes, that is the main reason to use a click tool rather than a wipe. The tip reaches the ferrule inside the adapter, which is exactly where wipes cannot go.
Guides Cases and Industries
Power Meter and OTDR Testing Basics
Two instruments that answer different questions, why you need both, and what to write down so the result means something later.
Maintenance GuideHow to Clean and Inspect Fiber Optic Connectors
Most high-loss ports are dirty, not faulty. The inspect, clean, inspect cycle and why new connectors are not exempt.
Process GuideInsertion Loss and Return Loss Explained
Two numbers on every test report, what each one is telling you, and how to build a link budget that survives being maintained.
Deployment ProfileCampus Backbone Connector Migration
Phasing a legacy ST or FC estate onto SC and LC equipment without cutting anything
Deployment ProfileField Drop Termination Without A Splicer
Terminating a subscriber drop with a cleaver and a hand tool, and knowing what that trade costs
IndustryData Center and Enterprise LAN
High-density patching, structured cabling and building-to-building links
Request Pricing For One Click Cleaner (1.25)
Tell us the quantity and destination. If you are matching a part you already buy, send the sample and we will quote against it.