KL-330 Optical Multi Meter
KL-330 Optical Multi Meter is part of the test equipment range built by Ever Expresslink Limited in Ningbo, China.
Splicers, meters, identifiers and inspection tools for people who have to prove the link works
Interested in KL-330 Optical Multi Meter
Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.
Product Overview
KL-330 Optical Multi Meter is part of the test equipment range built by Ever Expresslink Limited in Ningbo, China.
It is one of 15 items in this range. A typical application is localising a break during an emergency restoration. What the range is built to give you there: consistent splice quality independent of who is on shift.
The problem it addresses is faults localised by walking the route instead of by measurement. A practical note that applies across this range: record wavelength, reference method and cord type with every result. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.
Key Benefits
- Supplied as KL-330 Optical Multi Meter, so the part you receive matches the designation you ordered against
- Measured evidence for handover rather than an assurance
- Faster fault localisation than route walking
- Fiber identification before anyone cuts anything
- Consistent splice quality independent of who is on shift
Problems It Solves
- Live fibres cut because nobody checked whether traffic was present
- Splice quality that varies with the technician and the weather
- Contamination diagnosed by guesswork instead of by inspection
- Links handed over with no measured evidence that they meet the budget
Application Scenarios
- Inspecting end faces on an assembly bench
- Certifying a newly installed link against its budget
- Localising a break during an emergency restoration
- Identifying the live fiber in a congested closure
Who It Is For
- Training centers teaching fiber practice
- Installation contractors certifying completed links
- Network maintenance and restoration crews
- Splicing teams working on outside plant
Technical Features
- Fusion splicers with automatic alignment and loss estimation
- Optical power meters and light sources for loss measurement
- Fiber identifiers for detecting traffic without disconnecting
- Video inspection scopes for end-face examination
Materials
- Impact-resistant instrument housings
- Precision optical detectors and sources
- Rechargeable battery packs
- Carrying cases and tool boxes
Specifications
| Product Designation | KL-330 Optical Multi Meter |
|---|---|
| Product Family | Test Equipment |
| Manufactured In | Ningbo, China |
| Warranty | One year against defects in materials and workmanship |
Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.
Manufacturing Process
- Instrument assembly and calibration
- Optical reference calibration against traceable standards
- Functional and battery endurance testing
- Firmware loading and verification where applicable
- Packing with accessories, case and documentation
Quality Control
- Calibration verified against reference standards before shipment
- Functional test of every measurement mode
- Battery charge and endurance verification
- Drop and handling sampling on portable units
- Accessory and case contents verified before dispatch
Customization Options
- Wavelength and measurement range
- Connector interface on meters and sources
- Kit contents and tool box configuration
- Carrying case format
- Calibration documentation on request
Handling KL-330 Optical Multi Meter
Before You Order
- Set a reference with the same cords you will use for the measurement
- Clean and inspect every connector before it goes into a test setup
- Use a fiber identifier before cutting or disconnecting anything
In Service
- Record wavelength, reference method and cord type with every result
- Keep instruments calibrated on a documented schedule
- Store batteries charged and instruments capped between jobs
Questions About KL-330 Optical Multi Meter
What do you need from us to quote KL-330 Optical Multi Meter?
The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.
Why use a fiber identifier?
To find out whether a fiber is carrying traffic before you touch it. Cutting a live fiber because the records were wrong is expensive, and identification takes seconds.
Do the fusion splicers handle drop cable and ribbon?
Splicer capability varies by model. Tell us what cable types your crews actually splice and we will confirm which model covers them, rather than you discovering a limit on site.
Is calibration documentation available?
Calibration documentation can be supplied with measurement instruments on request. Say so on the order, because it is normally prepared at dispatch.
Can you supply complete tool kits rather than individual instruments?
Yes. Optical tool boxes are supplied as working kits, which is usually more practical than assembling a kit from separately sourced items.
More Test Equipment
KL-280 Fusion Splicer
Used for identifying the live fiber in a congested closure.
View Details
KL-300T Fusion Splicer
Used for fusion splicing outside plant and drop cable.
View Details
BD203
Used for inspecting end faces on an assembly bench.
View Details
KL-310 Optical Power Meter
Used for fusion splicing outside plant and drop cable.
View DetailsGuides Cases and Industries
Installing Field Assembly Fast Connectors
A step by step method, the cleave quality that decides the result, and an honest account of what you trade against a fusion splice.
Buying GuideChoosing a Fiber Media Converter
Single fiber or dual fiber, fixed optics or SFP, standalone or chassis: four decisions that determine whether the link works and whether it scales.
Troubleshooting ArticlePower Meter and OTDR Testing Basics
Two instruments that answer different questions, why you need both, and what to write down so the result means something later.
Deployment ProfileCATV Optical Level Balancing
Bringing an optical distribution tree into level, and keeping reflections out of the picture
Deployment ProfileField Drop Termination Without A Splicer
Terminating a subscriber drop with a cleaver and a hand tool, and knowing what that trade costs
IndustryIndustrial and Medical Optical Links
Fiber links in environments where electrical noise, isolation or geometry rules out copper
IndustryTelecom and Carrier Networks
Passive components for access, metro and transmission plant that has to stay up for decades
Request Pricing For KL-330 Optical Multi Meter
Tell us the quantity and destination. If you are matching a part you already buy, send the sample and we will quote against it.