ELDY002
ELDY002 is part of the dome fosc range built by Ever Expresslink Limited in Ningbo, China.
Vertical dome closures for pole, wall and hand-hole splice points
Interested in ELDY002
Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.
Product Overview
ELDY002 is part of the dome fosc range built by Ever Expresslink Limited in Ningbo, China.
It is one of 9 items in this range. A typical application is pole-mounted distribution splice points on an FTTH route. What the range is built to give you there: mechanical seal that a crew can open and close without a torch.
The problem it addresses is sealing methods that need a torch and a trained hand. A practical note that applies across this range: seat the gasket evenly and tighten the clamp band in stages. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.
Key Benefits
- Supplied as ELDY002, so the part you receive matches the designation you ordered against
- Pole, wall and hand-hole mounting from the same closure body
- Vertical geometry that sheds water instead of collecting it
- Single base plate with multiple entry ports for feeder and drops
- Trays that hinge clear so existing splices are not disturbed
Problems It Solves
- Base plates without enough entry ports for a growing drop count
- Closures that have to come off the pole to be re-entered
- Splice trays that cannot be reached without disturbing existing fibres
- Sealing methods that need a torch and a trained hand
Application Scenarios
- Wall-mounted joints at a building entry
- Hand-hole splice points in a buried network
- Progressive subscriber connection as a street is sold
- Branch splicing from a feeder into multiple drop cables
Who It Is For
- Maintenance crews adding subscribers to an existing closure
- FTTH drop and distribution contractors
- Access network operators running pole-mounted plant
- CATV and broadband network builders
Technical Features
- Multiple sealed entry ports sized for feeder and drop cable
- Hinged, stackable splice trays
- Mechanical seal with reusable gasket
- Pole and wall mounting bracket options
Materials
- High-impact engineering plastic dome and base
- Rubber sealing gaskets and grommets
- Stainless steel clamp band and fasteners
- Thermoplastic splice trays
Specifications
| Product Designation | ELDY002 |
|---|---|
| Product Family | Dome FOSC |
| Manufactured In | Ningbo, China |
| Warranty | One year against defects in materials and workmanship |
Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.
Manufacturing Process
- Dome and base molding with dimensional inspection
- Gasket seating and clamp band fitting
- Tray stack and hinge assembly
- Seal and pressure verification
- Kit packing with brackets and consumables
Quality Control
- Seal and pressure integrity tested on sample closures
- Clamp band retention force verified
- UV and impact resistance testing per lot
- Tray hinge cycling on samples
- Packing list verification before dispatch
Customization Options
- Fiber capacity and tray count
- Entry port count and sizing for your drop cable
- Pole, wall or hand-hole mounting kit
- Tray type for single-fiber or ribbon work
- Private-label molding and packaging on volume orders
Handling ELDY002
Before You Order
- Size the closure for the final drop count on that pole, not the first ones
- Anchor every cable's strength member to the base before splicing
- Keep drop entries sealed even when the port is not yet used
In Service
- Hinge trays rather than lifting them, so lower splices stay undisturbed
- Seat the gasket evenly and tighten the clamp band in stages
- Label trays and ports so the next crew can add a subscriber blind
Questions About ELDY002
What do you need from us to quote ELDY002?
The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.
How is the closure sealed?
With a mechanical gasket and clamp band rather than heat shrink, so no torch is needed and the closure can be reopened and resealed by any crew.
What cable sizes do the entry ports accept?
Ports are supplied with grommets sized for common feeder and drop cables. Send us the cable diameters you use and the correct grommet set will be specified on the order.
Is it suitable for hand-hole installation?
Yes, the sealed body is intended for outside-plant use including hand holes. Confirm whether the installation may be submerged so the right sealing configuration is supplied.
Why choose a dome closure over a horizontal one?
Because of how the cables arrive. If everything enters from below, on a pole or in a hand hole, a dome sheds water and gives the crew one working face. Straight-through joints along a duct or an aerial span suit a horizontal closure better.
More Dome FOSC
ELDY005
Used for progressive subscriber connection as a street is sold.
View Details
ELDY006
Used for progressive subscriber connection as a street is sold.
View Details
ELDY007
Used for hand-hole splice points in a buried network.
View Details
ELD001
Used for progressive subscriber connection as a street is sold.
View DetailsGuides Cases and Industries
Choosing Between Dome and Horizontal Splice Closures
Cable geometry decides the format, capacity decides the size, and the reopening method decides what the next crew has to carry.
Deployment ProfilePON Street Cabinet Split Point
How a feeder fiber becomes subscriber ports inside a street cabinet, and which decisions are expensive to reverse
IndustryFTTH and Broadband Operators
Drop-side and distribution hardware for networks whose cost is decided per subscriber
Request Pricing For ELDY002
Tell us the quantity and destination. If you are matching a part you already buy, send the sample and we will quote against it.