2 Port SC

Name: 2 Port SC
Brand: Ever Expresslink
SKU: 2port-sc-435

FTTH Termination Box

2 Port SC is part of the ftth termination box range built by Ever Expresslink Limited in Ningbo, China. It is built on the SC (Subscriber Connector) interface.

Compact subscriber-side boxes that end the drop and present a clean port

Interested in 2 Port SC

Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.

Request A Quote Request A Sample

Product Overview

2 Port SC is part of the ftth termination box range built by Ever Expresslink Limited in Ningbo, China. It is built on the SC (Subscriber Connector) interface.

SC pairs a 2.5 mm ferrule with a square push-pull housing that clicks into the adapter and releases by pulling the body straight back. SC bodies clip together into duplex pairs. Check polarity before you clip, because a reversed duplex clip is easy to build and hard to spot in a cabinet.

It is one of 5 items in this range. A typical application is ending a subscriber drop inside a home or small office. What the range is built to give you there: internal splice protection and slack storage with controlled bend radius.

The problem it addresses is boxes that cannot be opened for a later fault without dismantling the install. A practical note that applies across this range: store slack on the guides rather than coiling it tightly. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.

Key Benefits

Supplied as 2 Port SC, so the part you receive matches the designation you ordered against
Lockable or clip-closed versions depending on where it is installed
Small footprint that is acceptable inside a subscriber's premises
Internal splice protection and slack storage with controlled bend radius
Standard adapter ports so any modem patch cord fits

Problems It Solves

Boxes that cannot be opened for a later fault without dismantling the install
Drop fiber terminated loose behind furniture with no protection
Boxes too large to place acceptably inside a subscriber's home
Service loops coiled tighter than the fiber's bend radius

Application Scenarios

PON splitter outputs
Small business fiber entry points
Temporary service connections during a phased build
Replacing a damaged in-home termination on a service call
Ending a subscriber drop inside a home or small office

Who It Is For

MDU and apartment building cabling contractors
Property developers specifying in-home fiber provision
Distributors supplying installation teams
FTTH subscriber connection crews

Technical Features

SC (Subscriber Connector) interface
SC bodies clip together into duplex pairs. Check polarity before you clip, because a reversed duplex clip is easy to build and hard to spot in a cabinet.
Wall-mount body with cable entry and retention
Adapter and pigtail options pre-fitted or supplied loose
2 and 4 port versions for single and multi-service premises
Integrated splice holder and slack storage

Materials

ABS or engineering plastic body
Thermoplastic splice holder and routing guides
Ceramic sleeve adapters where fitted
Stainless or plastic fixings

Specifications

Product Designation	2port SC
Product Family	FTTH Termination Box
Connector Interface	SC (Subscriber Connector)
Manufactured In	Ningbo, China
Warranty	One year against defects in materials and workmanship

Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.

Manufacturing Process

Body molding and dimensional inspection
Routing and splice holder fitting
Adapter and pigtail installation on pre-fitted versions
Function and fit verification
Packing with fixings and instructions

Quality Control

Bend radius verified on the routing path
Adapter port loss checked on pre-fitted versions
Closure and latch cycling on samples
Fit and fixing verification against the design
Packing list check before dispatch

Customization Options

Port count
Pre-fitted adapters and pigtails or empty body
Connector type and polish
Lockable or clip closure
Private-label molding and packaging on volume orders

Compared With Other Options

LC	LC is half the footprint and doubles port density; SC is easier to handle in a crowded closure
FC	FC's threaded nut resists vibration; SC is faster to patch and re-patch

Use Guide

Handling 2 Port SC

Before You Order

Mount where the subscriber will accept it and where the drop enters cleanly
Anchor the drop cable's strength member inside the box, not at the wall
Store slack on the guides rather than coiling it tightly

In Service

Cap unused ports until they are commissioned
Test the port with a power meter before leaving
Label the box with the drop and closure reference

FAQ

Questions About 2 Port SC

What do you need from us to quote 2 Port SC?

The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.

Can 2 Port SC be supplied with a different connector interface?

Yes. SC (Subscriber Connector) is what this designation carries, and the same family is stocked across the other mainstream connector standards. Tell us the port you have to mate with and we will confirm the equivalent part.

Can the box be supplied with adapters and pigtails already fitted?

Yes. Pre-fitted versions save the crew a step at the premises. Empty bodies are also available where you prefer to build them in your own workshop.

Is there enough room for a service loop?

Yes, the routing guides are designed to store slack without dropping below the fiber's bend radius. Coiling slack tightly is the most common installation fault we see.

Is a lockable version available?

Yes, for communal areas and risers where the box should not be opened by residents. Clip-closed versions are normal inside a private dwelling.