BNC M Connector for BT-3002
BNC M Connector for BT-3002 is part of the coaxial connector range built by Ever Expresslink Limited in Ningbo, China. It is built on the BNC interface.
Feeder and instrument connectors that keep impedance continuous
Interested in BNC M Connector for BT-3002
Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.
Product Overview
BNC M Connector for BT-3002 is part of the coaxial connector range built by Ever Expresslink Limited in Ningbo, China. It is built on the BNC interface.
BNC is a bayonet coaxial connector for 50 or 75 ohm cable, used for video, instrumentation and RF test connections. 50 ohm and 75 ohm BNC bodies look almost identical. Mixing them on a video path produces reflections that show as ghosting.
It is one of 4 items in this range. A typical application is building RF jumper assemblies. What the range is built to give you there: weatherproofing provision on outdoor types.
The problem it addresses is water ingress at outdoor connections. A practical note that applies across this range: check impedance is consistent across the whole system. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.
Key Benefits
- Supplied as BNC M Connector for BT-3002, so the part you receive matches the designation you ordered against
- Supplied alongside the matching cable from one source
- Connectors matched to the specific feeder construction
- Weatherproofing provision on outdoor types
- Consistent impedance through the transition
Problems It Solves
- Reflections caused by connectors that do not match the cable construction
- Water ingress at outdoor connections
- 50 and 75 ohm parts mixed on the same system
- Field terminations done without the correct preparation tool
Application Scenarios
- Coaxial patch panels
- Test bench connections on measurement equipment
- Maintenance replacement of a corroded outdoor connector
- Terminating feeder at an antenna or at equipment
- Building RF jumper assemblies
Who It Is For
- RF and wireless installation contractors
- Broadcast and CCTV installers
- Test and instrumentation laboratories
- Antenna system integrators
Technical Features
- BNC interface
- 50 ohm and 75 ohm BNC bodies look almost identical. Mixing them on a video path produces reflections that show as ghosting.
- BNC types for video and instrumentation
- Impedance-matched body construction
- Weatherproofing provision on outdoor types
- Plated contacts for stable long-term connection
Materials
- Brass or copper alloy body with plating
- PTFE or equivalent dielectric
- Gold or silver plated center contact
- Rubber sealing components on outdoor types
Specifications
| Product Designation | BNC M connector for BT-3002 |
|---|---|
| Product Family | Coaxial Connector |
| Connector Interface | BNC |
| Manufactured In | Ningbo, China |
| Warranty | One year against defects in materials and workmanship |
Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.
Manufacturing Process
- Body machining and plating
- Dielectric and contact assembly
- Dimensional and impedance verification
- Return loss sampling
- Kit packing with sealing components
Quality Control
- Return loss measured on sample units
- Dimensional verification against the connector standard
- Plating thickness sampled per lot
- Sealing performance verified on outdoor types
- Kit contents verified before dispatch
Customization Options
- Connector type and cable size
- 50 or 75 ohm impedance
- Straight or right-angle body
- Plating specification
- Kitted assemblies with matching cable
Compared With Other Options
| Type N | Type N handles higher power and frequency; BNC is faster to patch by hand |
|---|
Handling BNC M Connector for BT-3002
Before You Order
- Match the connector to the exact cable construction, not just the diameter
- Use the correct preparation tool; hand-trimmed feeder rarely terminates well
- Check impedance is consistent across the whole system
In Service
- Weatherproof every outdoor joint with tape or a boot
- Torque to the stated value rather than as tight as it will go
- Sweep the assembly after termination to confirm return loss
Questions About BNC M Connector for BT-3002
What do you need from us to quote BNC M Connector for BT-3002?
The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.
Can BNC M Connector for BT-3002 be supplied with a different connector interface?
Yes. BNC is what this designation carries, and the same family is stocked across the other mainstream connector standards. Tell us the port you have to mate with and we will confirm the equivalent part.
Are weatherproof versions available?
Outdoor types include sealing provision, and every outdoor joint should additionally be taped or booted. Water ingress is the most common failure mode on mast-mounted connections.
Do I need a special preparation tool?
Yes for feeder connectors. The cable has to be cut and stripped to defined dimensions, and hand trimming is the usual reason a termination fails its sweep.
Can you supply pre-terminated jumper assemblies?
Yes, cut and terminated to your length with the matching cable, which removes field termination from the critical path.
More Coaxial Connector
BNC Male for BT3002
Used for terminating feeder at an antenna or at equipment.
View Details
3/8 Connector
Used for test bench connections on measurement equipment.
View Details
1/2 Connector
Used for maintenance replacement of a corroded outdoor connector.
View DetailsGuides Cases and Industries
Request Pricing For BNC M Connector for BT-3002
Tell us the quantity and destination. If you are matching a part you already buy, send the sample and we will quote against it.