Ribbon Heat-shrink Tube
Ribbon Heat-shrink Tube is part of the accessories range built by Ever Expresslink Limited in Ningbo, China.
The consumables and small parts an installation actually runs out of
Interested in Ribbon Heat-shrink Tube
Email the model and quantity with your destination country. We reply with pricing, lead time and a datasheet.
Product Overview
Ribbon Heat-shrink Tube is part of the accessories range built by Ever Expresslink Limited in Ningbo, China.
It is one of 11 items in this range. A typical application is restocking van and workshop consumable kits. What the range is built to give you there: bulk packing suited to a rollout rather than a single job.
The problem it addresses is polishing film grit sequences mixed up between benches. A practical note that applies across this range: keep polishing film grit sequences separated and labeled on the bench. Specifications for a particular configuration are confirmed on the quotation rather than assumed from the designation.
Key Benefits
- Supplied as Ribbon Heat-shrink Tube, so the part you receive matches the designation you ordered against
- Bulk packing suited to a rollout rather than a single job
- Consistent tolerances across repeat orders
- Ribbon and single-fiber variants of the same consumable
- Consumables sized to match the trays and hardware in the same catalog
Problems It Solves
- Jobs halted because a consumable ran out mid-shift
- Splice sleeves that do not match the tray holders in use
- Boots and saddles sourced from different suppliers with different tolerances
- Cable routing improvised with whatever is on the van
Application Scenarios
- Loading splice trays during closure and ODF work
- Protecting fusion splices in the field
- Routing and securing cable along a wall or in a rack
- Polishing connectors on an assembly bench
Who It Is For
- ODF and box assembly benches
- Maintenance and restoration teams
- Distributors supplying installation consumables
- Splicing and installation crews
Technical Features
- Splice trays and integrative trays sized for standard holders
- Connector boots and strain-relief parts
- Cable saddles and routing hardware
- Metal ferrules and polishing film for assembly benches
Materials
- Cross-linked polyolefin and steel rod on splice sleeves
- Thermoplastic trays, boots and saddles
- Stainless and copper alloy ferrules
- Coated abrasive polishing film
Specifications
| Product Designation | Ribbon heat-shrink tube |
|---|---|
| Product Family | Accessories |
| Manufactured In | Ningbo, China |
| Warranty | One year against defects in materials and workmanship |
Values shown are those carried by the product designation. Dimensional and optical values for a specific order are confirmed on the quotation.
Manufacturing Process
- Component production against dimensional specification
- Incoming material verification
- Sizing checks against the matching hardware
- Bulk counting and packing
- Lot identification and labeling
Quality Control
- Shrink performance sampled per lot on splice sleeves
- Tray fit verified against standard holders
- Boot and saddle dimensional sampling
- Polishing film grit verification per lot
- Pack count verified before dispatch
Customization Options
- Sleeve length and ribbon or single-fiber format
- Tray capacity and format
- Boot color and size
- Bulk pack quantities to suit your consumption
- Private-label packaging for distributors
Handling Ribbon Heat-shrink Tube
Before You Order
- Match sleeve length to the tray holders you actually use
- Follow the stated shrink temperature and time rather than guessing
- Keep polishing film grit sequences separated and labeled on the bench
In Service
- Use saddles at the spacing the cable's bend radius requires
- Store consumables dry and within their shelf life
- Restock van kits on a schedule rather than when they run out
Questions About Ribbon Heat-shrink Tube
What do you need from us to quote Ribbon Heat-shrink Tube?
The quantity, the destination and anything that has to match on your side: connector and polish at each end, fiber mode and core size, and length where the item is an assembly. If you are matching a part you already buy, send the sample and we will quote against it.
Can accessories be private labeled?
Yes, on volume orders, which is common for distributors supplying their own branded installation kits.
Do your splice sleeves fit standard tray holders?
Yes, they are sized to the common holder formats, including the trays supplied with our own closures and ODFs. If you use another manufacturer's trays, send us the holder dimension and we will confirm the sleeve length.
Are ribbon versions available?
Yes, ribbon splice protection is supplied alongside single-fiber versions for mass fusion splicing work.
Can consumables be ordered in bulk pack quantities?
Yes, and that is usually the sensible way to buy them. Tell us your monthly consumption and we will quote the pack size and price break that fits.
More Accessories
Integrative Tray (Ref 306)
Used for polishing connectors on an assembly bench.
View Details
Tray (Ref 307)
Used for restocking van and workshop consumable kits.
View Details
Integrative Tray (Ref 305)
Used for polishing connectors on an assembly bench.
View Details
Tray (Ref 304)
Used for protecting fusion splices in the field.
View DetailsGuides Cases and Industries
Fiber Optic Patch Cord Buying Guide
The seven things a patch cord order has to state, and what happens on site for each one you leave out.
Buying GuideChoosing Between Dome and Horizontal Splice Closures
Cable geometry decides the format, capacity decides the size, and the reopening method decides what the next crew has to carry.
Maintenance GuideHow to Clean and Inspect Fiber Optic Connectors
Most high-loss ports are dirty, not faulty. The inspect, clean, inspect cycle and why new connectors are not exempt.
IndustryIndustrial and Medical Optical Links
Fiber links in environments where electrical noise, isolation or geometry rules out copper
IndustryTest Measurement and OEM Integration
Component-level supply for instrument builders and cable assembly houses
Request Pricing For Ribbon Heat-shrink Tube
Tell us the quantity and destination. If you are matching a part you already buy, send the sample and we will quote against it.