All 77 Stenter Machine Parts

Pin plates, clips, chains, PEEK wear parts and brush wheels for Monforts frames.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details

Flat Nylon Selvedge Uncurler

Non-abrasive nylon guide that flattens fabric edges without the damage a metal guide causes.

View Details

Three Finger Selvedge Uncurler For Monforts Stenters

Three adjustable fingers that flatten the edge as it enters a Monforts frame.

View Details

PEEK Buffer Block For Monforts Stenters

PEEK buffer block that absorbs impact in the chain path without metal-to-metal contact.

View Details

Nylon Selvedge Uncurler and Pinning Device Assembly

Complete infeed pinning station with nylon uncurling guides built into the assembly.

View Details

Flat Nylon Selvedge Uncurler Single Blade

Single-blade nylon uncurler for mills replacing one worn edge guide rather than a full station.

View Details

Four Finger Selvedge Uncurler For Monforts Stenters

Four adjustable fingers giving a longer, more progressive edge opening zone at the infeed.

View Details

LK Pin Plate Holder For Stenter Chains

Chain-mounted holder that carries the pin plate on LK stenter frames.

View Details

PEEK Roller Set For Multi Finger Selvedge Uncurlers

Matched PEEK roller set for two, three and four finger uncurler banks.

View Details

PEEK Roller For Selvedge Uncurler

Replacement PEEK roller for roller-type selvedge uncurlers on stenters, pre-shrinking and printing machines.

View Details

Monforts Brush Wheel 220 x 167 Nylon High Temperature

The 220 by 167 Monforts wheel specified with high temperature nylon bristle as standard.

View Details

Brush Wheel For Monforts Stenters 180 x 22

The narrow 180 by 22 Monforts wheel for auxiliary and edge positions.

View Details

Brush Wheel For Monforts Stenters 220 x 167

The large Monforts brush wheel at 220 by 167, the size most Monforts pin beds use.

View Details

Carbon Graphite Strip For Monforts Guide Rails

Graphite strip fitted into the guide rail as a low friction running surface.

View Details

PEEK Bush For Monforts Stenter Chains

The wear-resistant lining between pin and chain, replacing the original copper mesh lining.

View Details

Pin Plate For Monforts Stenters Type 1

Monforts profile pin plate, the first of the two base profiles we hold for Monforts frames.

View Details

Pin Plate For Monforts Stenters Type 2

The second Monforts base profile we hold, for frames whose holder seat differs from Type 1.

View Details

Clip For Monforts Stenters Type 3

Monforts clip that opens at the infeed, closes its knife on the cloth, and reopens at the machine end.

View Details

Double Use Pin and Clip For Monforts Stenters

One part that works as a pin stenter and as a clip stenter, so the frame runs both ways without a bed change.

View Details

PEEK Nut For Monforts Stenters Black

The black PEEK grade of the Monforts lead rod nut, same sizes and same self-lubricating behaviour.

View Details

PEEK Nut For Monforts Stenters Brown

Self-lubricating adjustable nut for the guide rod that widens the rail, in sizes 44x7, 44x6 and 45x6.

View Details

Monforts Stenter Chain Parts

Loose chain components for Monforts oil-free guide frames: connectors, pins, PEEK bushes, dust covers and wear sleeves.

View Details

Monforts Stenter Chain Type 1

Complete Monforts chain for oil-free guide frames, built with PEEK bush and dust cover.

View Details

Monforts Stenter Chain Type 2 Lightweight

Lighter and stronger build with PEEK bush and dust cover, for smoother running on the track.

View Details

Monforts Stenter Chain Type 3 Standard Bush

Lightweight Monforts chain built with standard bushes rather than PEEK, for lines that do not need the upgrade.

View Details

Clip For Monforts Stenters Type 1

The first of our Monforts clip profiles, for frames whose clip geometry differs from the others.

View Details

Cloth Cutting Blade 200 x 40 x 2.5

High speed steel blade with sharp edges that trims fabric edges evenly, at 200 by 40 by 2.5 mm.

View Details

Three clip variants, three chain builds, two pin plate profiles and both brush wheel sizes for Bruckner frames.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details

Bruckner Stenter Clip Variant C

The third Bruckner clip geometry, completing the set we hold for Bruckner frames.

View Details

Bruckner Stenter Clip Variant B

The second Bruckner clip geometry, for frames that variant A does not fit.

View Details

Bruckner Stenter Clip Variant A

Bruckner clip, the first of three variants we hold for Bruckner frames.

View Details

Bruckner Stenter Clip Chain Section

Bruckner clips supplied already mounted on chain, ready to fit as a section.

View Details

Bruckner Stenter Chain With Pin Plate Section

Complete Bruckner chain section with pin plates and holders already mounted.

View Details

Lubrication Version Chain For Bruckner Stenters

Bruckner chain built with lubrication provision, for frames that run a greased guide rather than oil-free.

View Details

Bruckner Stenter Pin Plate Assembly

Pin plate supplied assembled with its Bruckner holder, ready to fit to the chain.

View Details

Bruckner Stenter Chain Type 3

Third Bruckner chain build, completing the set we hold for Bruckner frames.

View Details

Bruckner Stenter Chain Type 2

Second Bruckner chain build, for frames whose chain geometry differs from Type 1.

View Details

Bruckner Stenter Chain Type 1

The base Bruckner chain build, supplied by the section with all small parts available separately.

View Details

Brush Wheel For Bruckner Stenters 220 x 158

The large Bruckner brush wheel at 220 by 158, the main pressing size for Bruckner pin beds.

View Details

Brush Wheel For Bruckner Stenters 155 x 85

The small Bruckner brush wheel at 155 by 85 for secondary and edge positions.

View Details

Pin Plate For Bruckner Stenters Type 1

Bruckner profile pin plate with the standard two-row 5 mm pin bed.

View Details

Pin Plate For Bruckner Stenters Type 2

The alternative Bruckner seat profile for frames the Type 1 plate does not fit.

View Details

Chains with copper or PEEK sliders, PEEK bushes, two pin plate profiles, clips and 205 by 145 brush wheels.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details

Artos Stenter Clip

Clip for Artos stenter frames, supplied loose or mounted on Artos chain.

View Details

Pin Holder For Artos Stenter Chains

The holder that carries the pin plate on an Artos chain, matched to the Artos clip profile.

View Details

PEEK Bush For Artos Stenter Chains

PEEK bearing bush for Artos chains, easily changed and good for chain life.

View Details

Artos Stenter Chain With Copper Slider

Artos oil-free guide chain built with copper sliders and PEEK bushes.

View Details

Artos Stenter Chain Complete Assembly

Full Artos chain assembly supplied as a run, with all small parts available separately.

View Details

Artos Stenter Chain With PEEK Slider

Artos chain built with self-lubricating PEEK sliders instead of copper.

View Details

PEEK Slider For Artos Stenter Chains

Self-lubricating slider that rides the Artos guide rail, replacing the copper slider.

View Details

PEEK Nut For IL SUNG Stenters

Self-lubricating lead rod nut cut to the IL SUNG thread, for Korean-built frames.

View Details

Brush Wheel For Artos Stenters 205 x 145

The Artos brush wheel size at 205 by 145, supplied with the Artos chain and pin parts.

View Details

Pin Plate For Artos Stenters

Artos profile pin plate with the standard two-row 5 mm pin bed.

View Details

Pin Plate For Artos Stenters Wide Base

Wide-base Artos pin plate for frames whose holder seat takes the broader plate.

View Details

Guide rail, chain, chain parts, 76 mm pin plate holders, pin plates, brush wheels and high temperature chain oil.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details

Guide Rail For LK Stenters

High quality steel or alloy guide rail for LK frames, adjustable and convertible to Monforts profile.

View Details

LK Stenter Chain Parts

Individual LK chain components for servicing rather than replacing the chain.

View Details

BESLUX High Temperature Stenter Chain Oil

High viscosity adhesive chain oil that stays on the chain at speed and holds up at temperature.

View Details

LK Pin Plate Holder 76 mm Hold Size

Specialised alloy holder with a 76 mm hold size, shaped to match LK stenter chains.

View Details

Chain For LK Stenter Machines

LK stenter chain available in several types and quality levels, or customised to requirement.

View Details

Brush Wheel For ALKAN Stenters 225 x 90

The ALKAN brush wheel size at 225 by 90, held alongside the LK range.

View Details

Brush Wheel For LK Stenters 207 x 80

The LK brush wheel at 207 by 80, part of our complete LK spares range.

View Details

Pin Plate For LK Stenters

LK profile pin plate, part of our full LK spare parts range including rail, chain and holders.

View Details

Pin plates and self-lubricating PEEK lead rod nuts for the Korean-built frames.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details

Pin Plate For IL SUNG Stenters

IL SUNG profile pin plate for the Korean-built frames, supplied with matching PEEK nuts.

View Details

Pin plates, holders and loose pins for Monforts, Bruckner, Artos, LK, IL SUNG, KRANTZ and EHWHA frames.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details

EHWHA Pin Plate Holder

Pin plate holder matched to EHWHA frames, the part that carries the plate on the chain.

View Details

Bruckner Stenter Chain With Pin Plate Section

Complete Bruckner chain section with pin plates and holders already mounted.

View Details

Bruckner Stenter Pin Plate Assembly

Pin plate supplied assembled with its Bruckner holder, ready to fit to the chain.

View Details

Pin Plate 642 Small Size

The small-size 642 pin plate for narrow beds and tight pin positions.

View Details

Pin Plate For Artos Stenters

Artos profile pin plate with the standard two-row 5 mm pin bed.

View Details

Pin Plate For KRANTZ Stenters

KRANTZ profile pin plate with the standard two-row 5 mm pin bed.

View Details

Pin Plate 707 and 708

The 707 and 708 pin plate sizes, held as a standing specification.

View Details

Pin Plate For IL SUNG Stenters

IL SUNG profile pin plate for the Korean-built frames, supplied with matching PEEK nuts.

View Details

Stainless Steel Pin Plate For Polyimide Film Lines

High strength stainless pin plate rated to 800 degrees for PI film stenter lines.

View Details

Pin Needles For Textile Stenter Machines

Replacement pins for stenter pin plates, supplied loose for re-pinning rather than plate replacement.

View Details

Pin Plate For Stenter Machines

The standard pin plate: two rows of roughly 5 mm pins at 3 to 4 pins per cm on a hardened base plate.

View Details

Pin Plate For Bruckner Stenters Type 1

Bruckner profile pin plate with the standard two-row 5 mm pin bed.

View Details

Pin Plate For LK Stenters

LK profile pin plate, part of our full LK spare parts range including rail, chain and holders.

View Details

Pin Plate For Bruckner Stenters Type 2

The alternative Bruckner seat profile for frames the Type 1 plate does not fit.

View Details

Pin Plate For Artos Stenters Wide Base

Wide-base Artos pin plate for frames whose holder seat takes the broader plate.

View Details

Pin Plate For Monforts Stenters Type 1

Monforts profile pin plate, the first of the two base profiles we hold for Monforts frames.

View Details

Pin Plate For Monforts Stenters Type 2

The second Monforts base profile we hold, for frames whose holder seat differs from Type 1.

View Details

Complete chains and individual components for Monforts, Bruckner, Artos and LK frames, plus Ferraro and Lafer compactors.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details

Chain For Ferraro Compacting Machines

Chain built for Italian Ferraro compacting machines rather than for a stenter frame.

View Details

Chain For Lafer Compacting Machines

Chain built for Italian Lafer compacting machines, made to sample.

View Details

LK Pin Plate Holder For Stenter Chains

Chain-mounted holder that carries the pin plate on LK stenter frames.

View Details

Bruckner Stenter Chain With Pin Plate Section

Complete Bruckner chain section with pin plates and holders already mounted.

View Details

Bruckner Stenter Chain Type 3

Third Bruckner chain build, completing the set we hold for Bruckner frames.

View Details

Bruckner Stenter Chain Type 2

Second Bruckner chain build, for frames whose chain geometry differs from Type 1.

View Details

Bruckner Stenter Chain Type 1

The base Bruckner chain build, supplied by the section with all small parts available separately.

View Details

PEEK Bush For Artos Stenter Chains

PEEK bearing bush for Artos chains, easily changed and good for chain life.

View Details

Artos Stenter Chain With Copper Slider

Artos oil-free guide chain built with copper sliders and PEEK bushes.

View Details

Artos Stenter Chain Complete Assembly

Full Artos chain assembly supplied as a run, with all small parts available separately.

View Details

Artos Stenter Chain With PEEK Slider

Artos chain built with self-lubricating PEEK sliders instead of copper.

View Details

LK Stenter Chain Parts

Individual LK chain components for servicing rather than replacing the chain.

View Details

Chain For LK Stenter Machines

LK stenter chain available in several types and quality levels, or customised to requirement.

View Details

Monforts Stenter Chain Parts

Loose chain components for Monforts oil-free guide frames: connectors, pins, PEEK bushes, dust covers and wear sleeves.

View Details

Monforts Stenter Chain Type 1

Complete Monforts chain for oil-free guide frames, built with PEEK bush and dust cover.

View Details

Monforts Stenter Chain Type 2 Lightweight

Lighter and stronger build with PEEK bush and dust cover, for smoother running on the track.

View Details

Monforts Stenter Chain Type 3 Standard Bush

Lightweight Monforts chain built with standard bushes rather than PEEK, for lines that do not need the upgrade.

View Details

Knife closure clips for Monforts, Bruckner, Artos and Stentex frames, plus a double use pin and clip part.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details

Bruckner Stenter Clip Variant C

The third Bruckner clip geometry, completing the set we hold for Bruckner frames.

View Details

Bruckner Stenter Clip Variant B

The second Bruckner clip geometry, for frames that variant A does not fit.

View Details

Bruckner Stenter Clip Variant A

Bruckner clip, the first of three variants we hold for Bruckner frames.

View Details

Bruckner Stenter Clip Chain Section

Bruckner clips supplied already mounted on chain, ready to fit as a section.

View Details

Artos Stenter Clip

Clip for Artos stenter frames, supplied loose or mounted on Artos chain.

View Details

Stentex Stenter Clip

Clip for Stentex stenter frames, reproduced from sample where original spares are scarce.

View Details

Pin Holder For Artos Stenter Chains

The holder that carries the pin plate on an Artos chain, matched to the Artos clip profile.

View Details

Pin Plate For Monforts Stenters Type 1

Monforts profile pin plate, the first of the two base profiles we hold for Monforts frames.

View Details

Pin Plate For Monforts Stenters Type 2

The second Monforts base profile we hold, for frames whose holder seat differs from Type 1.

View Details

Clip For Monforts Stenters Type 3

Monforts clip that opens at the infeed, closes its knife on the cloth, and reopens at the machine end.

View Details

Double Use Pin and Clip For Monforts Stenters

One part that works as a pin stenter and as a clip stenter, so the frame runs both ways without a bed change.

View Details

Clip For Monforts Stenters Type 1

The first of our Monforts clip profiles, for frames whose clip geometry differs from the others.

View Details

Self-lubricating PEEK wear parts for lead rods, chains and guide rails, plus carbon graphite rail strip.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details

PEEK Buffer Block For Monforts Stenters

PEEK buffer block that absorbs impact in the chain path without metal-to-metal contact.

View Details

PEEK Bush For Artos Stenter Chains

PEEK bearing bush for Artos chains, easily changed and good for chain life.

View Details

PEEK Slider For Artos Stenter Chains

Self-lubricating slider that rides the Artos guide rail, replacing the copper slider.

View Details

PEEK Nut For IL SUNG Stenters

Self-lubricating lead rod nut cut to the IL SUNG thread, for Korean-built frames.

View Details

PEEK Bush For Monforts Stenter Chains

The wear-resistant lining between pin and chain, replacing the original copper mesh lining.

View Details

PEEK Nut For Monforts Stenters Black

The black PEEK grade of the Monforts lead rod nut, same sizes and same self-lubricating behaviour.

View Details

PEEK Nut For Monforts Stenters Brown

Self-lubricating adjustable nut for the guide rod that widens the rail, in sizes 44x7, 44x6 and 45x6.

View Details

Twelve sizes across Monforts, Bruckner, Artos, LK, ALKAN, ACC, F2, EHWHA and Unitech frames.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details

Monforts Brush Wheel 220 x 167 Nylon High Temperature

The 220 by 167 Monforts wheel specified with high temperature nylon bristle as standard.

View Details

Brush Wheel For EHWHA Stenters

EHWHA brush wheel, made to your sample and supplied with EHWHA pin plate holders.

View Details

Brush Wheel For Unitech Stenters

Unitech brush wheel for the Italian-built frames, made to your sample.

View Details

Brush Wheel For ACC Stenters 220 x 158

The large ACC brush wheel at 220 by 158.

View Details

Brush Wheel F2 205 x 157

The F2 brush wheel size at 205 by 157.

View Details

Brush Wheel For ACC Stenters 180 x 70

The small ACC brush wheel at 180 by 70 for secondary positions.

View Details

Brush Wheel For Bruckner Stenters 220 x 158

The large Bruckner brush wheel at 220 by 158, the main pressing size for Bruckner pin beds.

View Details

Brush Wheel For Bruckner Stenters 155 x 85

The small Bruckner brush wheel at 155 by 85 for secondary and edge positions.

View Details

Brush Wheel For ALKAN Stenters 225 x 90

The ALKAN brush wheel size at 225 by 90, held alongside the LK range.

View Details

Brush Wheel For Monforts Stenters 180 x 22

The narrow 180 by 22 Monforts wheel for auxiliary and edge positions.

View Details

Brush Wheel For LK Stenters 207 x 80

The LK brush wheel at 207 by 80, part of our complete LK spares range.

View Details

Brush Wheel For Artos Stenters 205 x 145

The Artos brush wheel size at 205 by 145, supplied with the Artos chain and pin parts.

View Details

Brush Wheel For Monforts Stenters 220 x 167

The large Monforts brush wheel at 220 by 167, the size most Monforts pin beds use.

View Details

High speed steel selvedge trimming blades, 200 by 40 by 2.5 mm as standard and other sizes to sample.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details

Cloth Cutting Blade 200 x 40 x 2.5

High speed steel blade with sharp edges that trims fabric edges evenly, at 200 by 40 by 2.5 mm.

View Details

E+L web guiders and pneumatic selvedge uncurlers for the stenter infeed.

E+L KF 2020 Pneumatic Web Guider and Selvedge Holder

Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.

View Details

E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03

Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.

View Details