Bruckner Stenter Clip Variant C
The third Bruckner clip geometry, completing the set we hold for Bruckner frames.
View Details
Stenter Clips
Bruckner Stenter Clip Variant B
The second Bruckner clip geometry, for frames that variant A does not fit.
Product Overview
The second Bruckner clip variant in our range. The working principle does not change: the clip is open at the infeed, the knife closes on the cloth as it enters and holds it tightly, and the clip reopens at the machine end.
What differs is geometry, and that is enough to matter. A clip that is close but not right will either fail to close fully or bind on the chain, and both faults show up as dropped cloth rather than as an obvious mechanical failure.
Key Benefits
- Second Bruckner geometry, covering frames variant A does not suit
- Knife closure holds the cloth tightly through the chambers
- No pin marks in the selvedge
- Held in stock alongside the other two Bruckner variants
Who It Is For
- Bruckner users who have already found variant A does not fit
- Maintenance stores separating clip spares per machine
- Engineers standardising spares across a mixed Bruckner fleet
Problems It Solves
- Clips binding on the chain because the geometry is slightly wrong
- Cloth being released mid-chamber by a clip that does not fully close
- Ordering from a machine model number rather than from the part
Application Scenarios
- Bruckner frames identified as taking the second clip geometry
- Plants running two Bruckner machines with different clip requirements
- Clip renewal after the first variant was found not to fit
Technical Features
- Bruckner clip profile, second variant
- Knife closure
- Metal construction, black finish
- Approximate weight 0.65 kg
Specifications
| Machine | Bruckner stenter |
|---|---|
| Type | clip, variant B |
| Colour | black |
| Weight | approx 0.65 kg |
| Origin | Zhejiang, China |
| Lead time | within 7 days for standard items |
| Origin | Shaoxing, Zhejiang, China |
Quality Control
- Gauged against the variant B reference specifically
- Closing force tested on every clip
- Chain fit checked on a sample link before batch release
Customisation Options
- Reproduced from your sample
- Loose or mounted on chain
- Marked per machine so a mixed fleet does not get mixed spares
Certifications. We make no certification claim for this part. The original company statement is that products comply with international quality standards; no certificate is named and none is asserted here. Ask us directly if your procurement process requires documentation.
Comparison With Other Options
Variant A and variant B carry the same closure principle and differ in geometry. Neither is better; one fits your frame and the other does not. A sample clip resolves it in one step.
Use Guide
Label a sample clip per machine and send both if you run two frames
Store variants separately and mark the shelf by machine number
Confirm free closure and release after fitting
Replace in sets along a section
Check knife edges at every planned stop
FAQ
Questions About Bruckner Stenter Clip Variant B
What is the difference between variants A and B?
Clip geometry. The closure principle is the same. Which one you need depends on your frame, and a sample clip settles it.
What happens if I fit the wrong variant?
It will either bind on the chain or fail to close fully. Both show up as dropped cloth rather than an obvious mechanical fault, which makes them slow to diagnose.
Can you mark parts per machine?
Yes, and it is worth doing if you run more than one Bruckner frame.
Do you supply Bruckner chain as well?
Yes, along with pin plates, holders and brush wheels sized for Bruckner frames.
Minimum order?
No fixed minimum.
Lead time?
Within 7 days for stock variants.
Related Products
Other Parts In This Family
Bruckner Stenter Clip Variant A
Bruckner clip, the first of three variants we hold for Bruckner frames.
View Details
Bruckner Stenter Clip Chain Section
Bruckner clips supplied already mounted on chain, ready to fit as a section.
View Details
Artos Stenter Clip
Clip for Artos stenter frames, supplied loose or mounted on Artos chain.
View DetailsRelated Reading
Guides That Cover This Part
What Is a Stenter Machine and How Does It Work
The stenter heat-sets and dries fabric by stretching it to width and holding it there under controlled heat.
Key Parts of a Stenter Machine
Entry section, clip or pin chains, rails, heating chambers, exhaust, blowers, temperature control, width adjustment and weft straightener.
Pin Stenter or Clip Stenter Which To Use
Clips leave no pin marks and suit thicker fabrics; pins hold more tension and run faster, to 100 m per minute.
Send A Sample And We Will Match The Profile
Seat profiles and geometry changed across frame generations, so the part itself is more reliable than a model number. We identify it and quote the matching specification.