EHWHA Pin Plate Holder
Pin plate holder matched to EHWHA frames, the part that carries the plate on the chain.
View Details
Pin Plates
Pin Plate For KRANTZ Stenters
KRANTZ profile pin plate with the standard two-row 5 mm pin bed.
Product Overview
A pin plate cut to the KRANTZ base profile. KRANTZ frames are still in service in many finishing plants, and original wear parts for them have become harder to obtain than for the current German brands.
The pin work is the standard arrangement: two rows of pins about 5 mm long at three to four per centimetre, thickened near the base so the cloth does not touch the hot base plate. Because pinning holds the cloth harder than a clip, it is what lets the frame carry more fabric tension and run to 100 m/min.
Key Benefits
- Keeps older KRANTZ frames in production when original spares are hard to find
- Standard 5 mm two-row pin bed at 3 to 4 pins per cm
- Cut to your sample so the plate seats correctly on the existing holder
- Supports higher fabric tension and speeds up to 100 m per minute
Who It Is For
- Mills operating KRANTZ stenters who cannot get original pin plates
- Maintenance engineers keeping legacy equipment productive
- Buyers who need a reproducible specification for a discontinued part
Problems It Solves
- Discontinued original spares for older KRANTZ machines
- Beds patched with plates of several specifications giving stepped pin height
- Production speed limited by a pin bed that no longer holds the cloth
Application Scenarios
- KRANTZ frames still running in finishing plants with ageing pin beds
- Machines where the original spares channel has closed
- Bed renewal on a frame that has been patched with mismatched plates
Technical Features
- KRANTZ seat profile
- Pins approximately 5 mm, two rows, 3 to 4 pins per cm
- Pins thickened at the base for heat separation
- Silver and yellow finish
Specifications
| Machine | KRANTZ stenter |
|---|---|
| Pin length | approx 5 mm |
| Pin rows | 2 |
| Pin density | approx 3-4 pins/cm |
| Finish | silver and yellow |
| Origin | Zhejiang, China |
| Lead time | within 7 days for standard items |
| Origin | Shaoxing, Zhejiang, China |
Quality Control
- Seat reproduced from your sample and gauged against it
- Pin height measured along the plate
- First article approved before the batch runs
Customisation Options
- Reverse engineered from a worn plate where no drawing exists
- Pin density and length adjusted to your article
- Specification recorded so repeat orders match the first
Certifications. We make no certification claim for this part. The original company statement is that products comply with international quality standards; no certificate is named and none is asserted here. Ask us directly if your procurement process requires documentation.
Comparison With Other Options
For a legacy frame the alternative to a matched reproduction is a plate from another brand that nearly fits, which will rock on the seat and bend its own pins. Reproducing from a sample costs a little more once and removes the problem permanently.
Use Guide
Send the best surviving plate, not the most worn one, as the sample
Ask for the specification to be recorded against your account for repeat orders
Renew by section so pin height stays continuous
Check holder seats for wear at the same shutdown
Keep a spare section on the shelf, because legacy parts take longer to replace
More Images
Additional Views
FAQ
Questions About Pin Plate For KRANTZ Stenters
Can you make plates for a machine with no drawings?
Yes. We reverse engineer from a sample plate. Send the best surviving one rather than the most worn, because we are copying the geometry from it.
Will you keep the specification for repeat orders?
Yes. We record it so a second order matches the first without you sending another sample.
Is the pin arrangement standard?
Yes, two rows of about 5 mm pins at three to four per centimetre, which is the common pin stenter arrangement.
How much can I order to start?
A trial section is normal, and sensible on a legacy frame, so you can confirm fit before committing.
What packing do you use?
Layered boxes protecting the pin faces, then palletised.
Delivery time?
Reproduction work is quoted once we have the sample; standard profiles ship within 7 days.
Related Products
Other Parts In This Family
Bruckner Stenter Chain With Pin Plate Section
Complete Bruckner chain section with pin plates and holders already mounted.
View Details
Bruckner Stenter Pin Plate Assembly
Pin plate supplied assembled with its Bruckner holder, ready to fit to the chain.
View Details
Pin Plate 642 Small Size
The small-size 642 pin plate for narrow beds and tight pin positions.
View DetailsRelated Reading
Guides That Cover This Part
The Main Stenter Machine Brands and Where They Are Built
Bruckner, Monforts, LK, IL SUNG, Mamata, Harish, Babcock, Shaoyang, Artos, Stentex and Unitech.
Send A Sample And We Will Match The Profile
Seat profiles and geometry changed across frame generations, so the part itself is more reliable than a model number. We identify it and quote the matching specification.