E+L KF 2020 Pneumatic Web Guider and Selvedge Holder
Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.
View Details
Selvedge Uncurlers and Web Guiders
Three Finger Selvedge Uncurler For Monforts Stenters
Three adjustable fingers that flatten the edge as it enters a Monforts frame.
Product Overview
A finger-type selvedge uncurler is mounted at the infeed section of a Monforts stenter, where adjustable fingers gently flatten the fabric edges as they enter the machine.
The three-finger version is the lighter-duty configuration. It prevents rolled or curled selvedges, which otherwise cause uneven stretching, defects and handling problems, and it keeps fabric width consistent so the edge aligns properly in the chain clips or pins.
Key Benefits
- Prevents rolled or curled selvedges that cause uneven stretching and defects
- Keeps fabric width consistent and the edge aligned into the clips or pins
- Three adjustable fingers cover a usable range of fabric weights
- Mounts at the infeed section of the Monforts stenter
Who It Is For
- Monforts users running mainly medium-weight woven qualities
- Mills replacing a worn finger-type uncurler like for like
- Plants that need edge control without moving to a pneumatic system
Problems It Solves
- Curled edges producing uneven stretching across the width
- Fabric arriving misaligned at the chain clips or pins
- Edge faults that only show up after heat setting, when the roll is already finished
Application Scenarios
- Textile finishing of denim, apparel fabrics and home textiles
- Medium-weight woven work where a full four-finger set is more than the article needs
- Frames where infeed space is tight and a shorter uncurler has to fit
Technical Features
- Three adjustable fingers, each set individually
- Mounted at the infeed section of the Monforts stenter
- Metal construction in a silver finish
- Approximate weight 0.6 kg
Specifications
| Specification | TBC — send a sample part and we confirm dimensions |
|---|---|
| Lead time | within 7 days for standard items |
| Origin | Shaoxing, Zhejiang, China |
Quality Control
- Finger geometry compared against the reference part
- Adjustment threads checked for free movement through full travel
- Contact edges deburred and inspected before packing
Customisation Options
- Finger spacing and length matched to your existing unit
- Mounting interface cut to the Monforts generation you run
- Supplied as a pair for both machine sides
Certifications. We make no certification claim for this part. The original company statement is that products comply with international quality standards; no certificate is named and none is asserted here. Ask us directly if your procurement process requires documentation.
Comparison With Other Options
Against the four-finger version, three fingers give a shorter opening zone and slightly less control on heavy or stubbornly curling cloth, at lower cost and in less mounting space. Against a pneumatic spreader, it is mechanical contact, so it is the wrong choice for elastane and very fine jersey.
Use Guide
Mount at the infeed section, upstream of the pinning point
Set all three fingers to the same starting height, then fine tune outward
Adjust while the line runs slowly and watch the edge open progressively, not all at once
Re-check settings after a change of fabric weight
Inspect finger tips for wear grooves at maintenance stops
FAQ
Questions About Three Finger Selvedge Uncurler For Monforts Stenters
Three fingers or four?
Three suits medium-weight woven work and tight mounting spaces. Four gives a longer opening zone and more control on heavier or strongly curling fabric. If your article mix is wide, the four-finger version is the safer buy.
Which machines is this for?
It is made for Monforts stenter machines, mounted at the infeed section. Tell us the machine generation and we confirm the mounting.
What fabrics does it suit?
Textile finishing work including denim, apparel fabrics and home textiles.
Will it mark delicate cloth?
It is a mechanical contact device, so for elastane blends and fine jersey we would point you at a pneumatic spreader instead.
Do you sell it as a pair?
Yes, and we recommend fitting both sides so the two edges behave the same.
Delivery time?
Standard units within 7 days. Matched-to-sample units are quoted once we have the sample.
Related Products
Other Parts In This Family
E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03
Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.
View Details
Flat Nylon Selvedge Uncurler
Non-abrasive nylon guide that flattens fabric edges without the damage a metal guide causes.
View Details
Nylon Selvedge Uncurler and Pinning Device Assembly
Complete infeed pinning station with nylon uncurling guides built into the assembly.
View DetailsRelated Reading
Guides That Cover This Part
What Is a Stenter Machine and How Does It Work
The stenter heat-sets and dries fabric by stretching it to width and holding it there under controlled heat.
Key Parts of a Stenter Machine
Entry section, clip or pin chains, rails, heating chambers, exhaust, blowers, temperature control, width adjustment and weft straightener.
Pin Stenter or Clip Stenter Which To Use
Clips leave no pin marks and suit thicker fabrics; pins hold more tension and run faster, to 100 m per minute.
Send A Sample And We Will Match The Profile
Seat profiles and geometry changed across frame generations, so the part itself is more reliable than a model number. We identify it and quote the matching specification.