Importing Machinery Parts From China Step By Step
Identify the part, find the supplier, negotiate terms, arrange shipping, pay securely and clear customs.
Cloth Cutting Blades
Cloth Cutting Blade 200 x 40 x 2.5
High speed steel blade with sharp edges that trims fabric edges evenly, at 200 by 40 by 2.5 mm.
Product Overview
This cloth cutting blade is made of high quality high speed steel, with sharp edges that can evenly trim the edges of fabric. The size is 200 by 40 by 2.5 mm.
On a stenter line the blade trims the selvedge after the cloth has been held by pins or clips, so edge quality in the finished roll depends directly on how sharp and how straight the blade is. High speed steel holds its edge longer than a general tool steel would at the temperatures involved.
Key Benefits
- High quality high speed steel holds its edge in service
- Sharp edges trim the fabric edge evenly rather than tearing it
- Standard size at 200 by 40 by 2.5 mm
- Approximate weight 0.44 kg per blade
Who It Is For
- Finishing mills trimming selvedges on the stenter line
- Maintenance stores holding blades as a consumable
- Engineers chasing edge quality faults in the finished roll
Problems It Solves
- Ragged or uneven fabric edges from a dull blade
- Blades losing their edge quickly because the steel specification is wrong
- Edge quality complaints that keep recurring after blade changes
Application Scenarios
- Selvedge trimming on a stenter line after pinning or clipping
- Edge quality complaints traced to a dull or chipped blade
- Routine blade renewal on a planned schedule
Technical Features
- Material: high quality high speed steel
- Sharp edges for even trimming of fabric edges
- Size 200 x 40 x 2.5 mm
- Silver finish, approximate weight 0.44 kg
Specifications
| Size | 200 x 40 x 2.5 mm |
|---|---|
| Material | high quality high speed steel |
| Weight | approx 0.44 kg |
| Colour | silver |
| Lead time | within 7 days |
| Lead time | within 7 days for standard items |
| Origin | Shaoxing, Zhejiang, China |
Quality Control
- Edge sharpness and straightness inspected on every blade
- Thickness measured along the blade length
- Material specification checked on incoming steel
Customisation Options
- Other sizes made from your sample blade
- Edge geometry adjusted for a specific fabric
- Supplied in quantity for a scheduled replacement programme
Certifications. We make no certification claim for this part. The original company statement is that products comply with international quality standards; no certificate is named and none is asserted here. Ask us directly if your procurement process requires documentation.
Comparison With Other Options
Against a general tool steel blade, high speed steel holds its edge longer at the temperatures and speeds involved. Against re-sharpening a worn blade, a new blade gives a known starting geometry, which matters when edge quality is the complaint you are trying to close out.
Use Guide
Handle blades with care; the edges are sharp by design
Check the blade seats square in its holder before running
Change on a schedule rather than on complaint, because edge quality degrades gradually
Inspect for chipping as well as dullness, since a chip marks every metre of cloth
Keep spares on the shelf, because a blade failure stops the line
FAQ
Questions About Cloth Cutting Blade 200 x 40 x 2.5
What size is the standard blade?
200 by 40 by 2.5 mm, weighing approximately 0.44 kg.
What steel is used?
High quality high speed steel, with sharp edges that can evenly trim the edges of fabric.
Can you make other sizes?
Yes, from a sample blade or a drawing.
How often should blades be changed?
On a schedule rather than on complaint. Edge quality degrades gradually, so waiting for a complaint means a quantity of cloth has already been affected.
Can blades be re-sharpened?
They can, but a new blade gives a known starting geometry, which is worth having when you are closing out an edge quality complaint.
Lead time?
Within 7 days for the standard size.
Related Products
Other Parts In This Family
Related Reading
Guides That Cover This Part
Send A Sample And We Will Match The Profile
Seat profiles and geometry changed across frame generations, so the part itself is more reliable than a model number. We identify it and quote the matching specification.