E+L KF 2020 Pneumatic Web Guider and Selvedge Holder
Pneumatic edge holder that keeps the web centred and the selvedge open at the stenter infeed.
View Details
Selvedge Uncurlers and Web Guiders
Flat Nylon Selvedge Uncurler Single Blade
Single-blade nylon uncurler for mills replacing one worn edge guide rather than a full station.
Product Overview
This is the single-blade version of our flat nylon selvedge uncurler, supplied as an individual part rather than as a paired station. It does the same job: a flat or slightly curved polymer profile that opens a rolling edge before it reaches the pins.
Mills usually order this version when one side has worn out, when a spare needs to sit on the shelf, or when only one position on the line needs an uncurler at all.
Key Benefits
- Ordered as a single item, so a one-sided replacement does not force a pair purchase
- Same high-wear nylon body and non-abrasive face as the paired version
- Resists the heat and chemicals present in finishing processes
- Adjustable in height and angle once mounted
Who It Is For
- Maintenance stores building a spares kit for the stenter infeed
- Mills that only need to replace the worn side
- Engineers trialling nylon before converting both sides
Problems It Solves
- Paying for a pair when only one blade has worn
- Downtime waiting for a replacement guide to arrive
- Edge scoring from a worn or metal guide on the affected side
Application Scenarios
- One-side replacement after uneven wear on a frame that runs off-centre
- Spare part kept on the shelf against an unplanned stop
- A single guide position ahead of a pinning device on a short line
Technical Features
- High-wear nylon or polymer body
- Flat or slightly curved profile to gently uncurl edges
- Non-abrasive face, low friction against the cloth
- Supplied as a single blade, not a set
Specifications
| Specification | TBC — send a sample part and we confirm dimensions |
|---|---|
| Lead time | within 7 days for standard items |
| Origin | Shaoxing, Zhejiang, China |
Quality Control
- Profile compared against the reference sample for every blade
- Edge break and deburr check so nothing catches the cloth
- Batch identification kept so a repeat order matches the first
Customisation Options
- Cut to your existing profile from a sample or drawing
- Mounting slot position matched to your bracket
- Alternative polymer grade for higher line temperatures
Certifications. We make no certification claim for this part. The original company statement is that products comply with international quality standards; no certificate is named and none is asserted here. Ask us directly if your procurement process requires documentation.
Comparison With Other Options
Functionally identical to the paired flat nylon uncurler. The difference is commercial, not technical: buy the single blade for a one-sided replacement, buy the pair when you are renewing both sides and want matched wear from day one.
Use Guide
Compare the new blade against the removed one before fitting
Set the height to match the surviving side so the web stays balanced
Run a short length and inspect both edges under the press wheel
Record the fitting date so you can track wear rate
Plan the opposite side's replacement once the first shows measurable wear
FAQ
Questions About Flat Nylon Selvedge Uncurler Single Blade
Can I run one nylon blade against one metal guide?
It works, but the two sides will behave differently and wear at different rates. If the budget allows, change both sides so edge behaviour stays symmetrical.
Do you supply from a sample?
Yes. Send the worn blade or a dimensioned photo and we cut to match.
What temperature can it take?
The nylon grade is selected for the heat and chemicals used in finishing. Tell us your maximum chamber temperature and we confirm the grade before you order.
Is there a minimum order quantity?
No fixed minimum for this item. Single blades are a normal order.
How fast can you ship?
Standard profiles within 7 days. A cut-to-sample profile is confirmed once we have the sample or drawing.
What else should I change at the same time?
If the blade wore out early, check the press wheel and the pin plate condition in the same position, because an edge fault is often the symptom rather than the cause.
Related Products
Other Parts In This Family
E+L ELSPREADER Pneumatic Selvedge Uncurler LPA 03
Air-powered selvedge spreader that opens curled edges just before pinning, without touching the cloth hard.
View Details
Flat Nylon Selvedge Uncurler
Non-abrasive nylon guide that flattens fabric edges without the damage a metal guide causes.
View Details
Three Finger Selvedge Uncurler For Monforts Stenters
Three adjustable fingers that flatten the edge as it enters a Monforts frame.
View DetailsRelated Reading
Guides That Cover This Part
What Is a Stenter Machine and How Does It Work
The stenter heat-sets and dries fabric by stretching it to width and holding it there under controlled heat.
Key Parts of a Stenter Machine
Entry section, clip or pin chains, rails, heating chambers, exhaust, blowers, temperature control, width adjustment and weft straightener.
Pin Stenter or Clip Stenter Which To Use
Clips leave no pin marks and suit thicker fabrics; pins hold more tension and run faster, to 100 m per minute.
Send A Sample And We Will Match The Profile
Seat profiles and geometry changed across frame generations, so the part itself is more reliable than a model number. We identify it and quote the matching specification.