Pin Plates and Holders
Pins about 5 mm long in two rows at 3 to 4 per cm, on seat profiles cut for seven different brands. Plus loose pins for in-house re-pinning and stainless plates rated to 800 degrees for PI film lines.
Stenter Machine Parts Manufacturer · Shaoxing China
Stenter Machine Parts Made To Fit Your Frame Not Your Model Number
Pin plates, clips, chains, PEEK wear parts and brush wheels for Monforts, Bruckner, Artos, LK and IL SUNG stenters. We match from your sample, so the part seats the first time.
- Monforts
- Bruckner
- Artos
- LK
- IL SUNG
- KRANTZ
- EHWHA
- Stentex
77parts in the catalogue
12product categories
7 daysdespatch on standard items
13stenter brands covered
What We Make
What We Make
Everything on the path the fabric takes through a stenter frame: the uncurlers that open the edge before it is held, the pins or clips that hold it, the chain that carries it, the rail the chain runs on, the brush wheels that press the cloth onto the pins, and the blade that trims the selvedge on the way out.
Stenter Chains
Complete chains and every small component individually: connectors, U-shaped connectors, pins, PEEK bushes, dust cover screws and wear sleeves, in oil-free and lubricated builds.
Clips
Knife closure clips for Monforts, Bruckner, Artos and Stentex, plus a double use part that runs both pin and clip work without a bed change.
PEEK Wear Parts
Self-lubricating nuts, bushes, sliders and buffer blocks that remove grease points from inside a hot chamber and outlast the metal they replace.
Brush Wheels
Twelve sizes with five bristle options, so the wheel is specified for the position temperature rather than taken as a single standard.
Infeed Equipment
E+L pneumatic web guiders and selvedge spreaders, nylon uncurlers and finger-type uncurlers, so the edge arrives open and square at the pinning point.
Product Range
Parts From Every Category In The Catalogue
Sixteen of the 77 parts we make, one from each category first. Every item is photographed as it ships.
Monforts Stenter Spare Parts
Bruckner Stenter Spare Parts
Artos Stenter Spare PartsArtos Stenter Clip
View Details
LK Stenter Spare PartsGuide Rail For LK Stenters
View Details
IL SUNG Stenter Spare PartsPin Plate For IL SUNG Stenters
View Details
Pin Plates and HoldersEHWHA Pin Plate Holder
View Details
Stenter ChainsChain For Ferraro Compacting Machines
View Details
Stenter ClipsBruckner Stenter Clip Variant C
View Details
PEEK Nuts Sliders and BushesPEEK Buffer Block For Monforts Stenters
View Details
Brush Wheels
Cloth Cutting BladesCloth Cutting Blade 200 x 40 x 2.5
View Details
Monforts Stenter Spare PartsFlat Nylon Selvedge Uncurler
View Details
Monforts Stenter Spare Parts
Monforts Stenter Spare PartsMonforts Stenter Spare PartsFlat Nylon Selvedge Uncurler Single Blade
View Details
Monforts Stenter Spare PartsCategories
Twelve Categories Covering The Whole Chain Side
Five by machine brand, seven by part type. Most orders cross both, which is why they ship together.
28 partsMonforts Stenter Spare Parts
Pin plates, clips, chains, PEEK wear parts and brush wheels for Monforts frames.
Browse Category16 partsBruckner Stenter Spare Parts
Three clip variants, three chain builds, two pin plate profiles and both brush wheel sizes for Bruckner frames.
Browse Category13 partsArtos Stenter Spare Parts
Chains with copper or PEEK sliders, PEEK bushes, two pin plate profiles, clips and 205 by 145 brush wheels.
Browse Category10 partsLK Stenter Spare Parts
Guide rail, chain, chain parts, 76 mm pin plate holders, pin plates, brush wheels and high temperature chain oil.
Browse Category3 partsIL SUNG Stenter Spare Parts
Pin plates and self-lubricating PEEK lead rod nuts for the Korean-built frames.
Browse Category19 partsPin Plates and Holders
Pin plates, holders and loose pins for Monforts, Bruckner, Artos, LK, IL SUNG, KRANTZ and EHWHA frames.
Browse Category19 partsStenter Chains
Complete chains and individual components for Monforts, Bruckner, Artos and LK frames, plus Ferraro and Lafer compactors.
Browse Category14 partsStenter Clips
Knife closure clips for Monforts, Bruckner, Artos and Stentex frames, plus a double use pin and clip part.
Browse Category9 partsPEEK Nuts Sliders and Bushes
Self-lubricating PEEK wear parts for lead rods, chains and guide rails, plus carbon graphite rail strip.
Browse Category15 partsBrush Wheels
Twelve sizes across Monforts, Bruckner, Artos, LK, ALKAN, ACC, F2, EHWHA and Unitech frames.
Browse Category3 partsCloth Cutting Blades
High speed steel selvedge trimming blades, 200 by 40 by 2.5 mm as standard and other sizes to sample.
Browse Category2 partsStenter Equipment and Accessories
E+L web guiders and pneumatic selvedge uncurlers for the stenter infeed.
Browse CategoryWho We Serve
Industries We Supply
Dyeing and finishing mills, knit finishers, denim ranges, home textile plants, technical textile lines and polyimide film producers.
Woven Fabric Finishing
Clip and pin hardware for cotton, polyester and blended woven finishing lines.
Read MoreKnitwear and Elastic Fabrics
Pneumatic uncurlers, nylon guides and PEEK wear parts for jersey, spandex blends and lightweight knits.
Read MoreDenim Finishing
Heavy-duty pin beds, four finger uncurlers and high speed steel blades for denim ranges.
Read MoreHome Textiles
Wide-width pin and clip hardware for curtain, upholstery and bed linen finishing.
Read More
Polyimide Film Lines
High strength stainless pin plates rated to 800 degrees for PI film production.
Read MoreTechnical Textiles and Coating
High temperature wear parts for coating, laminating and technical textile finishing.
Read MoreThe Problem
What Problem We Solve
Four things stop a stenter, and none of them is a mechanical failure. They are all supply and specification problems, which is where a parts maker can actually help.
Parts that nearly fit
Seat profiles, clip geometry and chain pitch changed across frame generations, so ordering from a machine model number gets the wrong part often enough that most mills have a shelf of them. We match from a sample and record the specification, so it happens once.
The fix that does not last
A new pin plate on a worn holder seat rocks under the press wheel and bends its own pins within a shift. A new chain on a worn rail wears out early. We supply the pair, and we say when the rail is the real problem.
Lead times on a consumable
Pin plates, bushes, brush wheels and blades are consumed continuously. Waiting weeks for them turns a maintenance item into a production stop. Standard items ship within 7 days.
A brand you cannot buy for any more
KRANTZ and Stentex frames are still in service and their original spares channels are not. Reverse engineering from a worn part is routine work here, and the specification is recorded so the problem does not come back.
Why Choose Us
Why Mills Buy From Us
Six things that are true about this factory, all of them checkable against the parts we ship.
Multi-brand manufacturing
We manufacture spare parts for multiple brands of stenter machine, for example MONFORTS, IL SUNG, LK, ARTOS and BRUCKNER, so a mixed floor is served from one order.
Customisation as standard
We can customise parts according to customer needs: pin plate, pin plate holder, clip, brush wheel and other metal parts. Reverse engineering from a worn sample is normal work, not an exception.
Rail guide conversion
Artos rail changed to Monforts rail, LK rail changed to Monforts rail, so one rail and slider specification can cover several frames.
Chain conversion
By replacing the chain, a machine can work for other types of fabric. We customise the chain rather than selling one grade to everyone.
Pin plates for PI film
We make pin plates for PI film in high strength stainless steel, heat resistant up to 800 degrees and corrosion resistant, fully adapted to polyimide film production.
We communicate
Promptly, efficiently, and with enthusiasm and patience, helping customers solve problems. Our team responds within 24 hours.
Solutions
How We Work With Maintenance Departments
Six ways of buying, depending on whether you are replacing a part, renewing a station or standardising a fleet.
Multi Brand Spare Parts Supply
Parts for multiple brands of stenter machine, so a mixed fleet is served from one order.
Read MoreCustom Parts To Drawing or Sample
We customise parts according to customer needs: pin plates, pin plate holders, clips, brush wheels and other metal parts.
Read MoreRail Guide Conversion
Artos rail changed to Monforts rail, LK rail changed to Monforts rail, so one specification covers several frames.
Read MorePEEK Upgrade Programme
Replace copper mesh linings, metal sliders and lubricated nuts with PEEK, one interface at a time.
Read MoreChain Maintenance Programme
Clean the guide and chain at least once a year, grease with a high temperature product, and decide service against replacement by measurement.
Read MoreInfeed Station Renewal
Uncurler, web guider and pinning device treated as one station rather than three separate fittings.
Read MoreKnowledge Centre
Guides On Stenter Parts and Maintenance
Twelve articles on how stenters work, what wears, and how to specify the parts that replace it.
Process GuideWhat Is a Stenter Machine and How Does It Work
The stenter heat-sets and dries fabric by stretching it to width and holding it there under controlled heat.
Read ArticleProduct GuideKey Parts of a Stenter Machine
Entry section, clip or pin chains, rails, heating chambers, exhaust, blowers, temperature control, width adjustment and weft straightener.
Read Article
Comparison ArticlePin Stenter or Clip Stenter Which To Use
Clips leave no pin marks and suit thicker fabrics; pins hold more tension and run faster, to 100 m per minute.
Read Article
Material GuideWhy PEEK Replaced Metal In Stenter Wear Parts
Self-lubrication, high temperature resistance and low noise are why PEEK took over the wear interfaces.
Read Article
Maintenance GuideStenter Chain Maintenance and Lubrication
Clean the guide and chain at least once a year, use a high temperature grease, and gauge the pitch to decide service against replacement.
Read Article
Buying GuideHow To Choose a Brush Wheel For Your Stenter
Two decisions matter: the size, which differs by millimetres between brands, and the bristle, which follows the position temperature.
Read ArticleFAQ
Questions Buyers Ask Before Ordering
What do you actually manufacture?
Stenter machine parts: clip, pin holder, chain, pin plate, rail guide, doctor bracket, end ring, brush wheels, PEEK nuts sliders and bushes, cloth cutting blades and other dyeing and finishing machinery parts.
Which stenter brands do you cover?
We manufacture spare parts for multiple brands, for example MONFORTS, IL SUNG, LK, ARTOS and BRUCKNER, plus KRANTZ, EHWHA, Stentex, ALKAN, ACC and Unitech frames, and chain for Italian Ferraro and Lafer compacting machines.
How do I order the right part?
Send a sample: one pin plate, one clip, a short length of chain, or a brush wheel. Seat profiles and clip geometry changed across frame generations, so a machine model number is not enough. We match from the part and record the specification for repeat orders.
How long is delivery?
Within 7 days for standard items. Chains, assembled sections and anything cut to sample are confirmed at quotation.
Can you customise parts?
Yes. We can customise parts according to customer needs, for example pin plate, pin plate holder, clip, brush wheel and other metal parts. We also customise the rail guide, changing an Artos or LK rail to a Monforts rail, and customise the chain so a machine can work for other types of fabric.
Is there a minimum order quantity?
There is no fixed minimum on most items. Most first orders are a trial section so you can confirm fit on the machine before committing to a full bed or chain run.
How do I get a quotation?
Message us on WhatsApp at +86 15068546681 or email [email protected] with the machine brand and a photo of the part. Our team responds within 24 hours.
Send Us A Photo Of The Part And We Will Identify It
Message the machine brand and a photo of the worn part. Our team replies within 24 hours with the matching specification and a price.