All Metallurgical Equipment and Rolling Mill Spare Parts
Every product we make, grouped by category. Complete machines for strip processing lines and the consumable parts that keep them running. Nothing is held back for a catalogue request.
Tension Levelers
Machines that stretch and bend strip under tension so its shape and internal stress are corrected together.
Tension Leveler for Aluminum Coil
Stress homogenising tension leveler for 0.2-4.0 mm aluminum strip at up to 500 m/min.
View Details
Levelling Machine for Galvanizing Lines
Two stage tension levelling machine removing three dimensional shape defects from carbon steel strip.
View Details
Tension Leveling Machine for Aluminum Plate
Two stage tension and bending machine removing three dimensional shape defects from aluminum plate.
View Details
Leveling Machine for Color Coating Lines
Tension and bending leveler preparing carbon steel strip for the coating section.
View Details
Tension Leveller With Two Bending and Two Levelling Stages
Two bending and two levelling stage leveller for carbon steel in galvanizing lines.
View Details
Tension Leveler for 1550 mm Galvanizing Lines
1550 mm galvanizing line tension leveler with two bending rows and balancing rollers.
View DetailsMulti Roll Levelers
Levelers with a high roll count for thin and high value strip, where correction has to be gradual rather than forceful.
Roller Leveler for Aluminum Sheet Processing
Multi roll precision leveler removing ripples, warping and coil breaks from sheet and coil.
View Details
Cut to Length Line With Precision Leveling
Servo driven cut to length line holding length deviation within ±0.5 mm at speeds to 120 m/min.
View Details
Cut to Length Machine With Tension Leveler
Q235A welded frame machine with hydraulic servo system for stainless strip cut to length work.
View Details
Tension Leveler Machine for 850 mm Cut to Length Lines
Compact leveler for narrow 850 mm cut to length lines with hydraulic servo roll control.
View Details
Multi Roll Leveler for 0.08-1 mm Copper Strip
Copper strip leveler for 0.08-1 mm material used in electrical and electronic components.
View Details
Multi Roll Leveler for Tension Leveling Lines 0.08-1 mm
Tension leveling line leveler for 0.08-1 mm strip with pre adjusted work rolls.
View Details
Multi Roller Leveler for 0.03 mm Titanium Plate
Ultra thin gauge leveler configured for titanium plate as thin as 0.03 mm.
View Details
23 Roll Tension Leveler for Copper Strip Lines
23 roll configuration for copper strip tension leveling lines from 0.08 to 1 mm.
View Details
23 Roll Stretch Leveler for Copper Strip
Stretch leveling configuration for 0.08-1 mm copper used in electrical system components.
View DetailsScale Breakers
Tension leveling equipment installed in front of the pickling tanks, where it cracks the oxide layer and corrects shape in one pass.
Scale Breaker for Push Pull Pickling Line 800-1350 mm
Tension leveler type scale breaker for push pull pickling lines handling 800-1350 mm hot rolled strip.
View Details
1850 Scale Breaker for Aluminum Sheet Lines
Stretch bend leveling and scale removal for aluminum strip up to 1850 mm working width.
View Details
Scale Breaker for 1850 mm Pickling Lines
Pre pickling tank scale breaker for wide hot rolled strip with bending and correcting roll units.
View Details
Scale Breaker for Pickling Lines
Pickling line scale breaker fracturing oxide by stretch and bend, saving acid and correcting shape.
View Details
Scale Breaker in 1850 mm Pickling Lines
Wide line scale breaker for 1850 mm pickling lines, fracturing oxide and correcting hot rolled strip.
View DetailsSide Trimmers
Equipment that removes defective strip edges so width stays constant and cracks never reach the next process.
Edge Trimming Unit for Slitting Lines
Double head cantilever rotary trimmer with servo cylinder width adjustment for thin strip.
View Details
Edge Trimmer for HiB Silicon Steel Pickling Lines
Pickling line edge trimmer for 1.2-3.0 mm HiB silicon steel with servo width control.
View Details
Circle Shear for 0.15 mm Strip Slitting Lines
Rotary circle shear trimming edges on very thin strip down to 0.15 mm thickness.
View Details
Side Trimmer With 3-50 mm Trimmed Width
Slitting line side trimmer removing 3 to 50 mm from each edge to renew strip width.
View DetailsFly Shears
Shears that cut while the strip keeps moving, so the line never decelerates for a crop.
High Speed Fly Shear for Continuous Strip Cutting
Rotary fly shear cutting at line speed, up to 2500 strokes per minute with carbide tipped blades.
View Details
Flying Shear for Continuous Rolling Lines
High speed head and tail cropping at full line speed without deceleration or stoppage.
View Details
Fly Shear for Metal Sheet and Strip Cutting
2500 strokes per minute cutting with 40 percent higher output than conventional hydraulic shears.
View DetailsScrap Choppers
The machine that keeps the trimming section running by chopping edge scrap as fast as it is produced.
Scrap Chopper Machine
Double roller scrap chopper cutting trimmed edge strip into pieces for collection and recycling.
View Details
Scrap Chopper for 2200 mm Slitting Lines
Wide line scrap chopper with independently driven left and right knife shafts for 2200 mm lines.
View Details
Scrap Chopper for Metallurgical Lines
Double roller chopper handling trimmed edge scrap for collection and recycling.
View DetailsRoll Coaters
Finishing equipment that applies paint or passivation solution evenly across the strip surface.
Roll Coating Machine for Galvanizing and Color Coating Lines
Horizontal, vertical and winding type coaters for 450-2200 mm strip at 70-260 m/min.
View Details
Passivation Roll Coater
Applies trivalent chrome passivation film to protect strip surfaces against corrosion.
View DetailsWork Rolls
The rolls that contact the strip directly and therefore set flatness precision and surface quality.
Tension Leveler Working Rolls
Hard chrome plated working rolls with HRC 63-65 surface hardness for tension leveling lines.
View Details
Chrome Plated Working Roll for 1450 mm Tension Leveler
Consumable work roll for 1450 mm galvanizing line tension levelers, chrome plated 0.05 mm.
View Details
Leveling Cassette Working Roll Sleeves
Roll sleeves in 30, 45 and 70 mm diameters at HRC 58-62 for cassette style levelling equipment.
View Details
High Precision Straightening Rolls
Precision ground alloy steel straightening rolls for longer runs between roll changes.
View Details
Precision Leveling Line Rolls
Leveling line rolls with uniform high hardness and a deep integral hardened layer.
View Details
Precision Work Rolls 9-68 mm With Hard Chrome Plating
Chrome plated work rolls, HV 800-1000 surface hardness, matched to chrome plated back up rolls.
View Details
Work Roll for Tension Leveller Cassettes
Alloy and tool steel work rolls at HRC 58-62 in Ø30, Ø40 and Ø70 mm industry standard sizes.
View Details
Work Roll Ø30 to Ø200 mm for Leveller Cassettes
Leveller cassette work rolls across Ø30, Ø45, Ø70 and Ø200 mm at HRC 58-62.
View Details
Work Roll With High Wear Resistance
Premium alloy steel work rolls, precision ground for long campaigns and consistent strip quality.
View Details
Chrome Plated Work Rolls 16-68 mm
16-68 mm work rolls paired with chrome plated back up rolls, surface hardness HV 800-1000.
View Details
Leveller Rolls for Leveling Lines
Support rolls in stainless or carbon steel preventing work roll deflection on leveling lines.
View Details
Work Roll 30 mm Diameter Chrome Plated
30 mm diameter chrome plated work rolls in stainless or carbon steel for tension levelers.
View Details
Work Roll for 1450 mm Tension Leveler
Primary contact rolls for 1450 mm galvanizing line levelers, diameters 9-68 mm.
View DetailsBack Up Rolls
The support side of the cassette, where rigidity comes from, and the first place to look when flatness will not hold.
Premium Back Up Rolls for Leveling Machines
Deep heat treated and precision ground back up rolls, roundness held to 0.005 mm class.
View Details
Back Up Rolls for Leveling Machines With 20 Years of Production Experience
Back up rolls developed through two decades of focus on this one component in metallurgy.
View Details
Back Up Roll in GCr15 for Tension Levelers
GCr15 back up rolls on carburized 20CrMnTi shafts at HRC 58-62, size 74 by 192 mm.
View Details
Support Roll 74 mm for Fast Galvanizing Lines
GCr15 support roll, 74 by 192 mm, with 20CrMnTi carburized shaft for high speed lines.
View Details
Back Up Roll in GCr15 for Straightening Levelers
GCr15 back up rolls, 74 by 192 mm, with 20CrMnTi carburized shafts for straightening machines.
View DetailsIntermediate Rolls
The bridge between work rolls and back up rolls, carrying bending load across to the support side.
Intermediate Roll in GCr15 and 9Cr2Mo
Induction hardened intermediate rolls, HRC 61-63 surface with 3-4 mm hardened layer.
View Details
Intermediate Roll for Tension Levelers
Consumable intermediate rolls ground to 0.006 mm class geometry and 0.2 micron finish.
View DetailsRoll Cassettes
The assembly that holds the work and intermediate rolls in position, and therefore sets the precision the whole machine can reach.
Roller Cartridges for Tension Leveling Machines
Deep quenched and chrome plated cassettes supporting work rolls and intermediate rolls.
View Details
Roll Units for High Accuracy Tension Leveling With 16 mm Work Rolls
Support units that prevent deflection of 16 mm diameter work rolls on high precision lines.
View Details
15 Roll Heavy Plate Multi Roll Leveler Roll Cassette
Quarto configuration 15 roll cassette for medium and wide heavy plate leveling lines.
View Details
1660 mm Precision Roll Units for Scale Breaking Machines
DIN 1.2344 equivalent alloy roll units with quick disassembly for 0.5-12 mm strip pickling lines.
View Details
Roll Cassettes for 1660 mm Scale Breaker
CNC machined cassettes held to ±0.05 mm, in DIN 1.2344 equivalent alloy steel.
View Details
Roll Cassettes for Scale Breakers
Precision CNC machined cassettes with ±0.05 mm geometry for scale breaking machines.
View Details
Roll System for High Precision 23 Roll Leveler
Multi roll system with micro stress elimination for copper, aluminum and specialty steel coil.
View Details
Precision Roll Cassettes for Tension Levelers
Cassettes with HRC 63-65 surface quenched rolls and chrome plating for high speed leveling.
View Details
High Precision Scale Breaker Roll Cassettes for Pickling Lines
Entry section bending roll cassettes for pickling lines serving automotive and electrical steel.
View Details
Tension Leveler Roll Cassettes With 16 mm Work Rolls
High accuracy cassettes with 16 mm work rolls in GCr15 or 9Cr2Mo for precision straightening.
View DetailsRoll End Supports
Small parts at the ends of the roll set that keep the rolls exactly where the cassette design puts them.
Roll End Sleeve 38 by 100 mm With Black Coating
Roll end sleeve 38 by 100 mm with black coating, restricting axial movement of work rolls.
View Details
Roll End Support With Ceramic Beads 29 by 51 mm
Ceramic bead headed roll end supports restricting axial movement inside leveller cassettes.
View DetailsBearings
Bearings for positions where cages fail first: low speed high load, shock loading and heavy radial duty.
Full Complement Cylindrical Roller Bearings for Frac Pumps
Cageless full complement bearings for frac pump power ends running at 100-150 MPa discharge pressure.
View Details
Cylindrical Roller Bearings for High Pressure Fracturing Pumps
Power end and connecting rod bearings for triplex and quintuplex frac pumps above 15,000 psi.
View Details
SL18 Series Bearings for Wind Energy
Full complement SL18 bearings for yaw and pitch systems with advanced sealing and traceability.
View Details
N28 Series Cylindrical Roller Wheels for Conveyor Chains
Through hardened conveyor chain rollers rated to 28 kN with precision ground running surface.
View Details
Full Complement Cylindrical Roller Bearings 20-1200 mm
SL series full complement bearings from 20 mm to 1200 mm for high radial load duty.
View Details
Bolt Type Cylindrical Roller Bearings NUKR 35
Stud type track roller bearings with thick walled outer ring for cam drives and conveyor systems.
View Details
N28 Series Cylindrical Roller Wheel
Chain conveyor roller wheels, d 19.2-41.75 mm, D 85-175 mm, Cr 133-306 kN.
View Details
SL18 Series Full Complement Cylindrical Roller Bearings
SL18 full complement bearings guided by two flanges, separable and easy to mount.
View DetailsCV Joints and Couplings
Constant velocity joints and couplings that replace cross joints in drives where speed fluctuation shows up in the product.
Ball Cage CV Universal Joints for Heavy Industry
Fixed and plunging ball cage CV joints from 380 N·m to 1,000,000 N·m, working angles to 75 degrees.
View Details
Drum Type Spline Couplings
Crowned tooth spline couplings carrying 15-20 percent more torque than straight tooth designs.
View Details
Ball Cage CV Joints for Metallurgical Drives
BJ, DOJ and BC series six ball CV joints with IT4 grade raceways for metallurgical drive lines.
View Details
BJ150 Coupling for the Metallurgical Industry
High torque BJ150 coupling in alloy steel with precision ground bearings and advanced sealing.
View Details
Driveshaft Universal Joint
Cardan type driveshaft joints for continuous casting, hot and cold rolling drive systems.
View Details
Heavy Duty Universal Joints
High strength joints for continuous casters, rolling mills and heavy duty conveyors.
View Details
BJ150 Coupling for Metallurgical and Engineering Drives
Power transmission coupling for steel making, continuous casting, hot and cold rolling drives.
View Details
Ball Cage CV Joint BJ125
BJ125 fixed type CV joint for steel making, casting, hot and cold rolling drive systems.
View Details
BC68 Series Coupling
BC68 series coupling with constant speed transmission for vehicle and industrial drives.
View DetailsUniversal Joints
The heaviest joints in the range, built for drive positions where a failure stops the whole line.
Questions About Our Product Range
Is this the complete range?
Yes, every product from our catalogue is listed on this page and none of them is hidden behind a download form.
Can you make products that are not listed?
Yes. Most of what we build is produced to a customer drawing. If the part you need is not listed, send the drawing or a sample and we quote it.
How are the categories organised?
Machines appear under equipment categories such as tension leveler, scale breaker or fly shear. Consumable parts appear under work roll, back up roll, roll cassettes, bearing and joint categories.
Do you sell single spare parts or only sets?
Both, though for rolls and cassettes we recommend complete sets so diameters and hardness stay consistent inside the machine.
Can you supply a mixed order of equipment and spares?
Yes, and it is common. Many plants order a machine together with a first set of spare rolls so the line has cover from day one.
How do I get prices?
Message us on WhatsApp or email with the product name and your line data. We reply within 24 hours.
Send Us Your Shopping List
Paste your equipment and spare parts list into WhatsApp and we price the whole thing in one reply.