All Products and Tooling

Automotive Air Handling Housing

Deep-ribbed black housing with a large circular bore and integrated ducting, molded as one piece.

Automotive Interior Trim Bezel

Slim black bezel frame with a molded-in clip rail and a Class-A visible face.

Automotive Intake Manifold

Long black manifold body with plenum, runner ports and bolt flanges in a single molding.

Automotive Air Filter Housing

Ribbed black housing shell with sealing lip and mounting bosses around the perimeter.

Automotive Headlamp Housing

Black headlamp housing with twin reflector bowls, connector apertures and adjuster pockets.

Automotive Lamp Housing with Reflector Cavities

Angular lamp body combining dark structure with light reflector zones in one tool.

Automotive Coolant Expansion Tank

Translucent tank body with a filler neck, level-readable wall and molded mounting feet.

Automotive Tail Lamp Lens

Two-color lens with a clear light-guide section blended into a deep red signal section.

Automotive HVAC Air Vent Register

Black vent register with twin circular barrels, louvre frame and a ducted rear body.

Automotive Under Hood Bracket Assembly

Wide structural bracket with a corrugated conduit run and molded-in retaining clips.

Automotive Speaker Grille Cover

Flat cover panel with a fine perforated acoustic field and snap-fit edge features.

Automotive Mirror Cap

High-gloss curved mirror cap with a clean unbroken Class-A outer surface.

Open the Die Casting Parts page

5 products

Die Casting Parts

Aluminum die casting tooling and cast components for structural housings brackets and bases

Die Cast Aluminum Rotor Disc

Cast aluminum disc with radial lugs, a bored hub face and an integral side arm.

Die Cast Aluminum Support Bracket

Slender cast arm pair with machined pivot bosses and a ribbed spine.

Die Cast Housing Block

Rectangular cast housing with an open cavity, twin bores and mounting lugs.

Die Cast Aluminum Five Star Chair Base

Polished five-arm base casting with castor sockets and a central column bore.

Die Cast Aluminum Gearbox Housing

Complex cast housing with bearing bores, a sealing flange and a full bolt pattern.

Open the Home & Office Appliance Parts page

9 products

Home & Office Appliance Parts

Large thin wall appliance housings covers and panels molded to a consistent visible finish

Transparent Blender Jug

Clear jug body with a molded handle, pour lip and internal measure ribs.

White Appliance Top Cover

Smooth white cover shell with a recessed control pocket and a clean parting line.

Office Equipment Top Cover with Media Slot

Dark grey curved cover with a full-width media slot and a molded latch rail.

Appliance Front Grille Panel

White frame panel carrying a fine louvre grille and snap features on both ends.

Appliance Curved Handle Cover

Long curved white cover with a sweeping Class-A face and hidden fixing bosses.

Vented Appliance Housing

White housing shell with a circular top aperture and a molded ventilation louvre bank.

Appliance Chassis Base Panel

Large flat light-grey base panel with stiffening ribs and multiple mounting pads.

Appliance Internal Frame Rail

Black internal rail with a dense array of bosses, ribs and cable-routing features.

Appliance Handle Housing

Elongated dark housing with a central aperture and a soft-radius grip profile.

Open the Medical Parts page

9 products

Medical Parts

Clear and thin wall medical components molded from tools finished to an optical cavity standard

Clear Medical Optical Cover

Optically clear V-profile cover with polished surfaces on both faces.

Transparent Medical Cassette Housing

Clear rectangular cassette with internal dividing ribs and a stepped sealing edge.

Blue Medical Connector Cap

Conical cap with an internally threaded bore and an external grip knurl.

Medical Valve Body with Tethered Cap

Clear valve body with side ports and a living-hinge tethered closure cap.

Medical Port Fitting with Tethered Cap

Port fitting with a stepped sealing face and a tethered cap on a molded strap.

Blue Transparent Filter Chamber

Tinted transparent chamber with a threaded neck and an integral inlet spigot.

Medical Filter Insert

Frosted conical insert with fine longitudinal slots molded through the wall.

Clear Medical Seal Component

Thin-wall clear component with a raised sealing bead and an internal channel form.

Clear Diagnostic Cuvette Block

Multi-chamber clear block with flat optical windows and stepped locating features.

Open the Mold Components page

9 products

Mold Components

Precision cavity plates core inserts and machined components cut ground and inspected in house

Polished Cavity Insert for Automotive Trim

Machined and polished insert carrying a long automotive trim form with sharp shut-offs.

Cavity Plate for Appliance Panel

Large cavity plate with a deep panel form, guide bores and a full cooling pattern.

Mold Plate with Lamp Housing Cavity

Plate carrying a curved lamp housing cavity with slide pockets and ejector bores.

Precision Core Insert Block

Tall machined core block with stepped faces, deep slots and interlocking shut-offs.

CNC Machined Mold Inserts

Set of inserts on the machine table, cut in one clamping for form accuracy.

Multi Cavity Plate for Oval Parts

Cavity plate with a row of oval cavities and a balanced runner layout.

Cavity Plate Under CMM Inspection

Cavity plate on the CMM with a probe measuring the circular cavity pattern.

Two Cavity Mold Plate for Bowl Shaped Parts

Two-cavity plate with deep bowl forms and mirror-finished cavity walls.

Mirror Polished Two Cavity Plate

Two-cavity plate finished to a mirror polish across the full molding surface.

Open the Pipe & Tube Parts page

9 products

Pipe & Tube Parts

Molded connectors manifolds and fittings for fluid circuits that have to seal every time

Barbed Pipe Connector with Mounting Bracket

Barbed spigot connector with an integrated flat mounting bracket and clip.

Plastic Tee Pipe Connector

Three-way tee with barbed ends and molded O-ring seats.

Plastic Pipe Manifold Housing

Multi-port manifold body with a large central bore and several branch spigots.

Angled Barbed Pipe Fitting

Angled fitting with deep-barbed run ends and a raised branch spigot.

Threaded Pipe Elbow Body

Elbow body with an external thread, a retaining collar and a molded inspection window.

Y Type Pipe Connector

Y connector with three externally threaded ports on a symmetrical split.

45 Degree Pipe Elbow with Flange

45-degree elbow with a flanged base and a molded-in identification panel.

Multi Port Valve Housing

Compact valve housing with several spigots and a molded actuator interface.

Compact Multi Port Connector

Small multi-port connector with barbed outlets on three axes.

Open the Plastic Injection Molds page

12 products

Plastic Injection Molds

Complete engineering molds designed built tried and documented for export production

Precision Mold Insert Set

Group of machined cavity and core blocks finished ready for fitting.

Precision Core Pins and Slide Inserts

Array of slender core pins, blades and slide inserts ground to size.

Injection Mold Mounted in Molding Machine

Mold clamped in the molding machine during trial, with the platen and tie bars visible.

Injection Mold with Hydraulic Core Pulls

Mold in the machine with hydraulic couplings feeding the core-pull cylinders.

Two Plate Injection Mold

Two-plate mold opened on the bench showing cavity and core sides together.

Multi Cavity Injection Mold with Lifters

Opened mold with several cavities, lifters and a balanced runner layout.

Large Two Cavity Injection Mold

Large opened mold with two deep cavities and heavy guide pillars.

Injection Mold with Cooling Circuit Manifolds

Mold on the bench with cooling manifolds and color-coded circuit hoses fitted.

Injection Mold with Multi Circuit Water Manifolds

Mold fitted with several independent water circuits routed through side manifolds.

Slide Action Injection Mold

Long mold with side slides and a multi-cavity layout set up on the bench.

Injection Mold Assembly on Assembly Bench

Mold assembly under final fitting, with plates and inserts laid up for build.

Large Injection Mold Ready for Trial

Large mold staged on the shop floor ahead of its trial in the molding machine.

Open the Two-Shot (2K) Parts page

6 products

Two-Shot (2K) Parts

Two shot and over molded parts where two materials have to meet on a line you can see

Two Shot Ribbed Panel

Curved panel combining a rigid frame with a ribbed contrast surface in one tool.

Two Shot Handheld Terminal Housing

Handheld terminal front housing molded in a yellow shell with a black keypad frame.

Two Shot Handheld Device Enclosure

Front and rear enclosure halves molded with hard and soft zones in register.

Two Shot Power Tool Handle

Power tool handle with a rigid core and an over-molded soft grip.

Two Shot Keypad Housing

Keypad housing with contrast key fields molded into the front shell.

Two Shot Scanner Grip Housing

Scanner grip housing with a rigid body and an over-molded contrast grip.