Cavity Plate Under CMM Inspection
Cavity plate on the CMM with a probe measuring the circular cavity pattern.
Cavity Plate Under CMM Inspection
Cavity Plate Under CMM Inspection is one of the parts molded on tooling built at our Dongguan shop. Cavity plate on the CMM with a probe measuring the circular cavity pattern.
3D data for this tool is issued in whichever format your own toolroom opens without translation: STEP, IGES, Parasolid, CATIA, SolidWorks.
Before any steel is roughed we run the filling, packing, warpage and cooling study, so the cooling layout on this tool comes out of the analysis rather than out of habit.
Key Benefits
- One shop from design through trial, with no tool transfer between vendors
- CNC, EDM, grinding and CMM equipment under one roof
- Design review meeting before the design reaches you
- Final mold and packing inspection before the tool is shipped
Problems It Solves
- Weld lines landing on a visible face because gating was chosen for fill alone
- Corrections argued verbally because no sample dimension report was ever issued
- Cavity finishes agreed after the steel was cut instead of before
Who It Is For
- Tool shops outsourcing overflow cavity and core work
- Mold owners needing spare or replacement inserts
- OEMs holding their own tools and buying consumable components
- Buyers needing electrode and insert work with an inspection record
Application Scenarios
- Cavity and core plates for production molds
- Slide blocks, lifters and shut-off inserts
- Core pins, blades and ground details
- Replacement inserts for tools already in production
How the Tool Behind Cavity Plate Under CMM Inspection Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Cavity Plate Under CMM Inspection |
|---|---|
| Reference on our catalogue | Mold Component 7 |
| Category | Mold Components |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Cavity Plate Under CMM Inspection is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Mold Components
Two Cavity Mold Plate for Bowl Shaped Parts
Two-cavity plate with deep bowl forms and mirror-finished cavity walls.
View details →
Mirror Polished Two Cavity Plate
Two-cavity plate finished to a mirror polish across the full molding surface.
View details →
Polished Cavity Insert for Automotive Trim
Machined and polished insert carrying a long automotive trim form with sharp shut-offs.
View details →
Cavity Plate for Appliance Panel
Large cavity plate with a deep panel form, guide bores and a full cooling pattern.
View details →Cavity Plate Under CMM Inspection — Buyer Questions
How long does a quotation take for Cavity Plate Under CMM Inspection?
We return a professional mold quotation within 2 working days. Send the 3D data, the resin and the expected annual volume and that is usually enough to quote without a second round of questions.
Do you make the part as well as the mold for Cavity Plate Under CMM Inspection?
We can. Mold-making is ninety percent of our business and injection production is the other ten percent, and both sit inside the same ISO 9001:2015 scope.
Are you certified?
Yes — ISO 9001:2015, with the scope recorded on the certificate as: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts. The certificate is shown on our quality page.
Do you run MoldFlow before building the mold for Cavity Plate Under CMM Inspection?
For mass production molds, yes. We run the practical study in four stages — filling, then packing, then warpage, then cooling — and the cooling layout is designed from the result.
Quote Cavity Plate Under CMM Inspection
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.