Multi Port Valve Housing
Compact valve housing with several spigots and a molded actuator interface.
Multi Port Valve Housing
Multi Port Valve Housing is one of the parts molded on tooling built at our Dongguan shop. Compact valve housing with several spigots and a molded actuator interface.
Final mold inspection and packing inspection are the last two steps before shipment, because a tool that passes trial can still arrive damaged.
The product surface finish review and the part and steel tolerance review both sit inside the DFM, so the finish and the tolerances are agreed in writing before the cavity is finished.
Key Benefits
- ISO 9001:2015 quality management covering design, manufacture and service
- Full 3D design issued in your own CAD format
- CNC, EDM, grinding and CMM equipment under one roof
- Built for more than 1 million shots, so the tool outlives the first production year
Problems It Solves
- Molds that arrive with no design record and no one able to explain the cooling layout
- Warpage found at assembly rather than in the cooling study
- Side actions that collide on the first close because the sequence was never simulated
Who It Is For
- Plumbing and sanitary system manufacturers
- Automotive and appliance fluid circuit suppliers
- Irrigation and water treatment equipment makers
- Assemblers sourcing a family of matched fittings
Application Scenarios
- Barbed connectors and tee pieces
- Threaded elbows and adaptor bodies
- Multi-port manifolds and valve housings
- Y connectors and branch fittings
How the Tool Behind Multi Port Valve Housing Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Multi Port Valve Housing |
|---|---|
| Reference on our catalogue | Pipe&Tube 8 |
| Category | Pipe & Tube Parts |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Multi Port Valve Housing is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Pipe & Tube Parts
Plastic Tee Pipe Connector
Three-way tee with barbed ends and molded O-ring seats.
View details →
Plastic Pipe Manifold Housing
Multi-port manifold body with a large central bore and several branch spigots.
View details →
Angled Barbed Pipe Fitting
Angled fitting with deep-barbed run ends and a raised branch spigot.
View details →
Threaded Pipe Elbow Body
Elbow body with an external thread, a retaining collar and a molded inspection window.
View details →Multi Port Valve Housing — Buyer Questions
How do you inspect the steel used for Multi Port Valve Housing?
Incoming material inspection first, then steel hardness inspection with steel certification, then dimensional inspection after machining. Electrodes are inspected for dimension and surface finish before they are used.
Who do we talk to during the project?
Our engineering team has been trained on customer mold standards and corresponds in English. Response to customers is no later than 24 hours.
Are you certified?
Yes — ISO 9001:2015, with the scope recorded on the certificate as: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts. The certificate is shown on our quality page.
Can you handle the side actions this part needs?
Tools with several slides or lifters go through a mold motion simulation before the design review closes, so the open-to-close sequence is proven step by step rather than discovered at first trial.
Quote Multi Port Valve Housing
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.