Two Shot Scanner Grip Housing
Scanner grip housing with a rigid body and an over-molded contrast grip.
Two Shot Scanner Grip Housing
Two Shot Scanner Grip Housing is one of the parts molded on tooling built at our Dongguan shop. Scanner grip housing with a rigid body and an over-molded contrast grip.
Where the geometry carries several side actions we prove the open-to-close sequence with a mold motion simulation before the design review closes.
Our engineering team reads customer mold standards and special requirements in English, so a specification written for a European or North American tool shop does not have to be rewritten for us.
Key Benefits
- Quotation returned within 2 working days
- Full 3D design issued in your own CAD format
- Design review meeting before the design reaches you
- CNC, EDM, grinding and CMM equipment under one roof
Problems It Solves
- A second source that has to be taught the program from the beginning
- Mold base components that cannot be replaced locally once the tool is in production
- Molds that arrive with no design record and no one able to explain the cooling layout
Who It Is For
- Handheld instrument and terminal manufacturers
- Power tool and equipment brands
- Consumer electronics enclosure suppliers
- Any OEM replacing an assembled soft grip with an over-mold
Application Scenarios
- Handheld terminal and scanner housings
- Soft-grip tool handles
- Contrast keypads and control fascias
- Rigid-plus-elastomer sealing components
How the Tool Behind Two Shot Scanner Grip Housing Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Two Shot Scanner Grip Housing |
|---|---|
| Reference on our catalogue | 2K Parts 6 |
| Category | Two-Shot (2K) Parts |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Two Shot Scanner Grip Housing is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Two-Shot (2K) Parts
Two Shot Ribbed Panel
Curved panel combining a rigid frame with a ribbed contrast surface in one tool.
View details →
Two Shot Handheld Terminal Housing
Handheld terminal front housing molded in a yellow shell with a black keypad frame.
View details →
Two Shot Handheld Device Enclosure
Front and rear enclosure halves molded with hard and soft zones in register.
View details →
Two Shot Power Tool Handle
Power tool handle with a rigid core and an over-molded soft grip.
View details →Two Shot Scanner Grip Housing — Buyer Questions
Is a prototype tool worth it before the production mold?
It is when the design is not yet frozen. Rapid prototype mold making is one of our listed services, priced low and built for a fast lead time, and what the trial shows feeds the DFM for the production tool.
How long does a quotation take for Two Shot Scanner Grip Housing?
We return a professional mold quotation within 2 working days. Send the 3D data, the resin and the expected annual volume and that is usually enough to quote without a second round of questions.
What will we receive when the mold for Two Shot Scanner Grip Housing is tried?
Mold trial reports together with a sample dimension report (FAI). Those documents are what any later dimensional discussion is settled against.
How are molds packed for export?
Final mold inspection is followed by a packing inspection before the tool leaves. Ninety percent of our molds go to overseas markets, so export packing is the normal case here rather than the exception.
Quote Two Shot Scanner Grip Housing
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.