Appliance Chassis Base Panel
Large flat light-grey base panel with stiffening ribs and multiple mounting pads.
Appliance Chassis Base Panel
Appliance Chassis Base Panel is one of the parts molded on tooling built at our Dongguan shop. Large flat light-grey base panel with stiffening ribs and multiple mounting pads.
The DFM we issue for a part like this carries the gating pictures, the main mold layout with dimensions, the parting and insert split lines and the ejection concept, and it goes to you for comment before fabrication starts.
Before any steel is roughed we run the filling, packing, warpage and cooling study, so the cooling layout on this tool comes out of the analysis rather than out of habit.
Key Benefits
- One shop from design through trial, with no tool transfer between vendors
- Mold motion simulation on complex multi-action tooling
- Reply to every enquiry inside 24 hours
- Standard components to DME / Meusburger / HASCO / Progressive / MISUMI so spares stay available locally
Problems It Solves
- Side actions that collide on the first close because the sequence was never simulated
- Molds that arrive with no design record and no one able to explain the cooling layout
- Tools shipped without a final inspection, arriving damaged and undocumented
Who It Is For
- Small domestic appliance brands
- Office equipment and printer OEMs
- Air treatment and climate product makers
- Contract manufacturers assembling finished appliances
Application Scenarios
- Top covers and housings on visible product faces
- Grilles, louvres and vent panels
- Chassis and base panels carrying assemblies
- Handles, bezels and internal frame rails
How the Tool Behind Appliance Chassis Base Panel Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Appliance Chassis Base Panel |
|---|---|
| Reference on our catalogue | OA Part 7 |
| Category | Home & Office Appliance Parts |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Appliance Chassis Base Panel is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Home & Office Appliance Parts
Appliance Handle Housing
Elongated dark housing with a central aperture and a soft-radius grip profile.
View details →
Transparent Blender Jug
Clear jug body with a molded handle, pour lip and internal measure ribs.
View details →
White Appliance Top Cover
Smooth white cover shell with a recessed control pocket and a clean parting line.
View details →
Office Equipment Top Cover with Media Slot
Dark grey curved cover with a full-width media slot and a molded latch rail.
View details →Appliance Chassis Base Panel — Buyer Questions
What will we receive when the mold for Appliance Chassis Base Panel is tried?
Mold trial reports together with a sample dimension report (FAI). Those documents are what any later dimensional discussion is settled against.
Can you work to our own mold standard for Appliance Chassis Base Panel?
Yes. Mold design follows your own standard where you have one, and otherwise a global standard such as DME / Meusburger / HASCO / Progressive / MISUMI. Naming the standard in the enquiry avoids re-specifying components later in the design.
How do you inspect the steel used for Appliance Chassis Base Panel?
Incoming material inspection first, then steel hardness inspection with steel certification, then dimensional inspection after machining. Electrodes are inspected for dimension and surface finish before they are used.
Can you supply replacement inserts for a tool already in production?
Precision components making with CNC and EDM machining is a service we sell on its own. Send the insert drawing or the 3D data and we will quote it as a component job.
Quote Appliance Chassis Base Panel
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.