Automotive HVAC Air Vent Register
Black vent register with twin circular barrels, louvre frame and a ducted rear body.
Automotive HVAC Air Vent Register
Automotive HVAC Air Vent Register is one of the parts molded on tooling built at our Dongguan shop. Black vent register with twin circular barrels, louvre frame and a ducted rear body.
The mold is tried before it leaves us and the trial report is issued with a sample dimension report, so first-article data exists before anything is packed.
Cavity and core steel is machined on our own CNC and EDM equipment, inspected dimensionally after machining, and the electrodes are checked for dimension and surface finish before they are burnt.
Key Benefits
- Standard components to DME / Meusburger / HASCO / Progressive / MISUMI so spares stay available locally
- Trial report with a sample dimension report (FAI) on delivery
- Final mold and packing inspection before the tool is shipped
- MoldFlow filling, packing, warpage and cooling on mass production tooling
Problems It Solves
- Suppliers who cannot read a mold standard written in English
- Long silences between the purchase order and the first sign of progress
- Side actions that collide on the first close because the sequence was never simulated
Who It Is For
- Tier 1 and Tier 2 automotive suppliers sourcing tools out of Asia
- Lighting specialists needing optical-grade cavity finishes
- Under-hood component makers with slide and lifter heavy geometry
- Interior trim suppliers with Class-A visible surfaces
Application Scenarios
- Front and rear lighting assemblies
- Air intake and air handling systems
- Cooling and coolant circuits
- Interior trim, vents and covers
How the Tool Behind Automotive HVAC Air Vent Register Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Automotive HVAC Air Vent Register |
|---|---|
| Reference on our catalogue | Automobile Part 6 |
| Category | Automotive Parts |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Automotive HVAC Air Vent Register is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Automotive Parts
Automotive Air Filter Housing
Ribbed black housing shell with sealing lip and mounting bosses around the perimeter.
View details →
Automotive Headlamp Housing
Black headlamp housing with twin reflector bowls, connector apertures and adjuster pockets.
View details →
Automotive Lamp Housing with Reflector Cavities
Angular lamp body combining dark structure with light reflector zones in one tool.
View details →
Automotive Coolant Expansion Tank
Translucent tank body with a filler neck, level-readable wall and molded mounting feet.
View details →Automotive HVAC Air Vent Register — Buyer Questions
What tool life should we expect on a mold for Automotive HVAC Air Vent Register?
Our high quality injection molds are built for more than 1 million shots. The exact figure for your tool depends on the resin, the cycle and the part geometry, and we put it in the quotation rather than leaving it open.
Are you certified?
Yes — ISO 9001:2015, with the scope recorded on the certificate as: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts. The certificate is shown on our quality page.
Can you work to our own mold standard for Automotive HVAC Air Vent Register?
Yes. Mold design follows your own standard where you have one, and otherwise a global standard such as DME / Meusburger / HASCO / Progressive / MISUMI. Naming the standard in the enquiry avoids re-specifying components later in the design.
Who do we talk to during the project?
Our engineering team has been trained on customer mold standards and corresponds in English. Response to customers is no later than 24 hours.
Quote Automotive HVAC Air Vent Register
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.