Multi Cavity Injection Mold with Lifters
Opened mold with several cavities, lifters and a balanced runner layout.
Multi Cavity Injection Mold with Lifters
Multi Cavity Injection Mold with Lifters is one of the parts molded on tooling built at our Dongguan shop. Opened mold with several cavities, lifters and a balanced runner layout.
Final mold inspection and packing inspection are the last two steps before shipment, because a tool that passes trial can still arrive damaged.
Material arriving for this kind of tool is inspected on receipt, with steel hardness inspection and steel certification held on file against the job.
Key Benefits
- ISO 9001:2015 quality management covering design, manufacture and service
- Mold motion simulation on complex multi-action tooling
- Trial report with a sample dimension report (FAI) on delivery
- CNC, EDM, grinding and CMM equipment under one roof
Problems It Solves
- Tooling quoted without an engineering study, so the first trial is also the first analysis
- Weld lines landing on a visible face because gating was chosen for fill alone
- Cavity finishes agreed after the steel was cut instead of before
Who It Is For
- OEMs moving a program to an Asian tooling source
- Product companies needing a tool and the engineering behind it
- Buyers replacing a tool that failed in production
- Teams needing rapid prototype tooling before committing to steel
Application Scenarios
- Two-plate and three-plate production molds
- Slide and lifter action tools
- Multi-cavity family and balanced-runner molds
- Rapid prototype molds ahead of a production tool
How the Tool Behind Multi Cavity Injection Mold with Lifters Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Multi Cavity Injection Mold with Lifters |
|---|---|
| Reference on our catalogue | z Plastic Mold 4 |
| Category | Plastic Injection Molds |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Multi Cavity Injection Mold with Lifters is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Plastic Injection Molds
Injection Mold Assembly on Assembly Bench
Mold assembly under final fitting, with plates and inserts laid up for build.
View details →
Large Injection Mold Ready for Trial
Large mold staged on the shop floor ahead of its trial in the molding machine.
View details →
Precision Mold Insert Set
Group of machined cavity and core blocks finished ready for fitting.
View details →
Precision Core Pins and Slide Inserts
Array of slender core pins, blades and slide inserts ground to size.
View details →Multi Cavity Injection Mold with Lifters — Buyer Questions
Can you handle the side actions this part needs?
Tools with several slides or lifters go through a mold motion simulation before the design review closes, so the open-to-close sequence is proven step by step rather than discovered at first trial.
Can you supply replacement inserts for a tool already in production?
Precision components making with CNC and EDM machining is a service we sell on its own. Send the insert drawing or the 3D data and we will quote it as a component job.
Can you work to our own mold standard for Multi Cavity Injection Mold with Lifters?
Yes. Mold design follows your own standard where you have one, and otherwise a global standard such as DME / Meusburger / HASCO / Progressive / MISUMI. Naming the standard in the enquiry avoids re-specifying components later in the design.
Which 3D formats can you issue for Multi Cavity Injection Mold with Lifters?
We issue mold design data in STEP, IGES, Parasolid, CATIA, SolidWorks. Tell us which one your toolroom opens natively and we will work in that.
Quote Multi Cavity Injection Mold with Lifters
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.