Clear Medical Seal Component
Thin-wall clear component with a raised sealing bead and an internal channel form.
Clear Medical Seal Component
Clear Medical Seal Component is one of the parts molded on tooling built at our Dongguan shop. Thin-wall clear component with a raised sealing bead and an internal channel form.
Our engineering team reads customer mold standards and special requirements in English, so a specification written for a European or North American tool shop does not have to be rewritten for us.
Where the geometry carries several side actions we prove the open-to-close sequence with a mold motion simulation before the design review closes.
Key Benefits
- Reply to every enquiry inside 24 hours
- Mold motion simulation on complex multi-action tooling
- Final mold and packing inspection before the tool is shipped
- MoldFlow filling, packing, warpage and cooling on mass production tooling
Problems It Solves
- Side actions that collide on the first close because the sequence was never simulated
- Molds that arrive with no design record and no one able to explain the cooling layout
- Suppliers who cannot read a mold standard written in English
Who It Is For
- Disposable device manufacturers
- Diagnostic and laboratory equipment makers
- Fluid handling and infusion set assemblers
- Device OEMs qualifying a second tooling source
Application Scenarios
- Connectors, caps and port fittings
- Filter chambers and strainer inserts
- Diagnostic cuvettes and optical windows
- Clear housings, cassettes and covers
How the Tool Behind Clear Medical Seal Component Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Clear Medical Seal Component |
|---|---|
| Reference on our catalogue | Medical Part 8 |
| Category | Medical Parts |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Clear Medical Seal Component is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Medical Parts
Medical Filter Insert
Frosted conical insert with fine longitudinal slots molded through the wall.
View details →
Clear Diagnostic Cuvette Block
Multi-chamber clear block with flat optical windows and stepped locating features.
View details →
Clear Medical Optical Cover
Optically clear V-profile cover with polished surfaces on both faces.
View details →
Transparent Medical Cassette Housing
Clear rectangular cassette with internal dividing ribs and a stepped sealing edge.
View details →Clear Medical Seal Component — Buyer Questions
Do you make the part as well as the mold for Clear Medical Seal Component?
We can. Mold-making is ninety percent of our business and injection production is the other ten percent, and both sit inside the same ISO 9001:2015 scope.
Are you certified?
Yes — ISO 9001:2015, with the scope recorded on the certificate as: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts. The certificate is shown on our quality page.
How are molds packed for export?
Final mold inspection is followed by a packing inspection before the tool leaves. Ninety percent of our molds go to overseas markets, so export packing is the normal case here rather than the exception.
Which 3D formats can you issue for Clear Medical Seal Component?
We issue mold design data in STEP, IGES, Parasolid, CATIA, SolidWorks. Tell us which one your toolroom opens natively and we will work in that.
Quote Clear Medical Seal Component
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.