Multi Cavity Plate for Oval Parts
Cavity plate with a row of oval cavities and a balanced runner layout.
Multi Cavity Plate for Oval Parts
Multi Cavity Plate for Oval Parts is one of the parts molded on tooling built at our Dongguan shop. Cavity plate with a row of oval cavities and a balanced runner layout.
Our engineering team reads customer mold standards and special requirements in English, so a specification written for a European or North American tool shop does not have to be rewritten for us.
The tool behind it is designed in full 3D to your standard or to a global standard such as DME / Meusburger / HASCO / Progressive / MISUMI, and the design is completed to one hundred percent detail before it is sent for your review.
Key Benefits
- Quotation returned within 2 working days
- ISO 9001:2015 quality management covering design, manufacture and service
- A written DFM before fabrication, so changes happen while they are still cheap
- Trial report with a sample dimension report (FAI) on delivery
Problems It Solves
- Weld lines landing on a visible face because gating was chosen for fill alone
- Molds that arrive with no design record and no one able to explain the cooling layout
- Side actions that collide on the first close because the sequence was never simulated
Who It Is For
- Tool shops outsourcing overflow cavity and core work
- Mold owners needing spare or replacement inserts
- OEMs holding their own tools and buying consumable components
- Buyers needing electrode and insert work with an inspection record
Application Scenarios
- Cavity and core plates for production molds
- Slide blocks, lifters and shut-off inserts
- Core pins, blades and ground details
- Replacement inserts for tools already in production
How the Tool Behind Multi Cavity Plate for Oval Parts Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Multi Cavity Plate for Oval Parts |
|---|---|
| Reference on our catalogue | Mold Component 6 |
| Category | Mold Components |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Multi Cavity Plate for Oval Parts is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Mold Components
Cavity Plate Under CMM Inspection
Cavity plate on the CMM with a probe measuring the circular cavity pattern.
View details →
Two Cavity Mold Plate for Bowl Shaped Parts
Two-cavity plate with deep bowl forms and mirror-finished cavity walls.
View details →
Mirror Polished Two Cavity Plate
Two-cavity plate finished to a mirror polish across the full molding surface.
View details →
Polished Cavity Insert for Automotive Trim
Machined and polished insert carrying a long automotive trim form with sharp shut-offs.
View details →Multi Cavity Plate for Oval Parts — Buyer Questions
How do you inspect the steel used for Multi Cavity Plate for Oval Parts?
Incoming material inspection first, then steel hardness inspection with steel certification, then dimensional inspection after machining. Electrodes are inspected for dimension and surface finish before they are used.
How are molds packed for export?
Final mold inspection is followed by a packing inspection before the tool leaves. Ninety percent of our molds go to overseas markets, so export packing is the normal case here rather than the exception.
What will we receive when the mold for Multi Cavity Plate for Oval Parts is tried?
Mold trial reports together with a sample dimension report (FAI). Those documents are what any later dimensional discussion is settled against.
Do you make the part as well as the mold for Multi Cavity Plate for Oval Parts?
We can. Mold-making is ninety percent of our business and injection production is the other ten percent, and both sit inside the same ISO 9001:2015 scope.
Quote Multi Cavity Plate for Oval Parts
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.