Plastic Pipe Manifold Housing
Multi-port manifold body with a large central bore and several branch spigots.
Plastic Pipe Manifold Housing
Plastic Pipe Manifold Housing is one of the parts molded on tooling built at our Dongguan shop. Multi-port manifold body with a large central bore and several branch spigots.
The mold is tried before it leaves us and the trial report is issued with a sample dimension report, so first-article data exists before anything is packed.
Cavity and core steel is machined on our own CNC and EDM equipment, inspected dimensionally after machining, and the electrodes are checked for dimension and surface finish before they are burnt.
Key Benefits
- Design review meeting before the design reaches you
- MoldFlow filling, packing, warpage and cooling on mass production tooling
- Final mold and packing inspection before the tool is shipped
- ISO 9001:2015 quality management covering design, manufacture and service
Problems It Solves
- Molds that arrive with no design record and no one able to explain the cooling layout
- Cavity finishes agreed after the steel was cut instead of before
- Side actions that collide on the first close because the sequence was never simulated
Who It Is For
- Plumbing and sanitary system manufacturers
- Automotive and appliance fluid circuit suppliers
- Irrigation and water treatment equipment makers
- Assemblers sourcing a family of matched fittings
Application Scenarios
- Barbed connectors and tee pieces
- Threaded elbows and adaptor bodies
- Multi-port manifolds and valve housings
- Y connectors and branch fittings
How the Tool Behind Plastic Pipe Manifold Housing Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Plastic Pipe Manifold Housing |
|---|---|
| Reference on our catalogue | Pipe&Tube 3 |
| Category | Pipe & Tube Parts |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Plastic Pipe Manifold Housing is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Pipe & Tube Parts
Y Type Pipe Connector
Y connector with three externally threaded ports on a symmetrical split.
View details →
45 Degree Pipe Elbow with Flange
45-degree elbow with a flanged base and a molded-in identification panel.
View details →
Multi Port Valve Housing
Compact valve housing with several spigots and a molded actuator interface.
View details →
Compact Multi Port Connector
Small multi-port connector with barbed outlets on three axes.
View details →Plastic Pipe Manifold Housing — Buyer Questions
Which 3D formats can you issue for Plastic Pipe Manifold Housing?
We issue mold design data in STEP, IGES, Parasolid, CATIA, SolidWorks. Tell us which one your toolroom opens natively and we will work in that.
What will we receive when the mold for Plastic Pipe Manifold Housing is tried?
Mold trial reports together with a sample dimension report (FAI). Those documents are what any later dimensional discussion is settled against.
Can you handle the side actions this part needs?
Tools with several slides or lifters go through a mold motion simulation before the design review closes, so the open-to-close sequence is proven step by step rather than discovered at first trial.
Can you work to our own mold standard for Plastic Pipe Manifold Housing?
Yes. Mold design follows your own standard where you have one, and otherwise a global standard such as DME / Meusburger / HASCO / Progressive / MISUMI. Naming the standard in the enquiry avoids re-specifying components later in the design.
Quote Plastic Pipe Manifold Housing
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.