Transparent Medical Cassette Housing
Clear rectangular cassette with internal dividing ribs and a stepped sealing edge.
Transparent Medical Cassette Housing
Transparent Medical Cassette Housing is one of the parts molded on tooling built at our Dongguan shop. Clear rectangular cassette with internal dividing ribs and a stepped sealing edge.
Quality control on a part like this starts at the initial stage rather than at final inspection, and runs through pre-DFM, mold design, fabrication, trials and the final check before delivery.
The tool behind it is designed in full 3D to your standard or to a global standard such as DME / Meusburger / HASCO / Progressive / MISUMI, and the design is completed to one hundred percent detail before it is sent for your review.
Key Benefits
- Trial report with a sample dimension report (FAI) on delivery
- One shop from design through trial, with no tool transfer between vendors
- Standard components to DME / Meusburger / HASCO / Progressive / MISUMI so spares stay available locally
- Reply to every enquiry inside 24 hours
Problems It Solves
- Cavity finishes agreed after the steel was cut instead of before
- Weld lines landing on a visible face because gating was chosen for fill alone
- Warpage found at assembly rather than in the cooling study
Who It Is For
- Disposable device manufacturers
- Diagnostic and laboratory equipment makers
- Fluid handling and infusion set assemblers
- Device OEMs qualifying a second tooling source
Application Scenarios
- Connectors, caps and port fittings
- Filter chambers and strainer inserts
- Diagnostic cuvettes and optical windows
- Clear housings, cassettes and covers
How the Tool Behind Transparent Medical Cassette Housing Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Transparent Medical Cassette Housing |
|---|---|
| Reference on our catalogue | Medical Part 2 |
| Category | Medical Parts |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Transparent Medical Cassette Housing is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Medical Parts
Clear Medical Optical Cover
Optically clear V-profile cover with polished surfaces on both faces.
View details →
Blue Medical Connector Cap
Conical cap with an internally threaded bore and an external grip knurl.
View details →
Medical Valve Body with Tethered Cap
Clear valve body with side ports and a living-hinge tethered closure cap.
View details →
Medical Port Fitting with Tethered Cap
Port fitting with a stepped sealing face and a tethered cap on a molded strap.
View details →Transparent Medical Cassette Housing — Buyer Questions
Is a prototype tool worth it before the production mold?
It is when the design is not yet frozen. Rapid prototype mold making is one of our listed services, priced low and built for a fast lead time, and what the trial shows feeds the DFM for the production tool.
Who do we talk to during the project?
Our engineering team has been trained on customer mold standards and corresponds in English. Response to customers is no later than 24 hours.
Can you work to our own mold standard for Transparent Medical Cassette Housing?
Yes. Mold design follows your own standard where you have one, and otherwise a global standard such as DME / Meusburger / HASCO / Progressive / MISUMI. Naming the standard in the enquiry avoids re-specifying components later in the design.
Which 3D formats can you issue for Transparent Medical Cassette Housing?
We issue mold design data in STEP, IGES, Parasolid, CATIA, SolidWorks. Tell us which one your toolroom opens natively and we will work in that.
Quote Transparent Medical Cassette Housing
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.