Angled Barbed Pipe Fitting
Angled fitting with deep-barbed run ends and a raised branch spigot.
Angled Barbed Pipe Fitting
Angled Barbed Pipe Fitting is one of the parts molded on tooling built at our Dongguan shop. Angled fitting with deep-barbed run ends and a raised branch spigot.
Material arriving for this kind of tool is inspected on receipt, with steel hardness inspection and steel certification held on file against the job.
3D data for this tool is issued in whichever format your own toolroom opens without translation: STEP, IGES, Parasolid, CATIA, SolidWorks.
Key Benefits
- Built for more than 1 million shots, so the tool outlives the first production year
- Engineering correspondence in English throughout the project
- Design review meeting before the design reaches you
- Reply to every enquiry inside 24 hours
Problems It Solves
- A second source that has to be taught the program from the beginning
- Warpage found at assembly rather than in the cooling study
- Side actions that collide on the first close because the sequence was never simulated
Who It Is For
- Plumbing and sanitary system manufacturers
- Automotive and appliance fluid circuit suppliers
- Irrigation and water treatment equipment makers
- Assemblers sourcing a family of matched fittings
Application Scenarios
- Barbed connectors and tee pieces
- Threaded elbows and adaptor bodies
- Multi-port manifolds and valve housings
- Y connectors and branch fittings
How the Tool Behind Angled Barbed Pipe Fitting Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Angled Barbed Pipe Fitting |
|---|---|
| Reference on our catalogue | Pipe&Tube 4 |
| Category | Pipe & Tube Parts |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Angled Barbed Pipe Fitting is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Pipe & Tube Parts
45 Degree Pipe Elbow with Flange
45-degree elbow with a flanged base and a molded-in identification panel.
View details →
Multi Port Valve Housing
Compact valve housing with several spigots and a molded actuator interface.
View details →
Compact Multi Port Connector
Small multi-port connector with barbed outlets on three axes.
View details →
Barbed Pipe Connector with Mounting Bracket
Barbed spigot connector with an integrated flat mounting bracket and clip.
View details →Angled Barbed Pipe Fitting — Buyer Questions
Are you certified?
Yes — ISO 9001:2015, with the scope recorded on the certificate as: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts. The certificate is shown on our quality page.
Who do we talk to during the project?
Our engineering team has been trained on customer mold standards and corresponds in English. Response to customers is no later than 24 hours.
Can you supply replacement inserts for a tool already in production?
Precision components making with CNC and EDM machining is a service we sell on its own. Send the insert drawing or the 3D data and we will quote it as a component job.
Do you run MoldFlow before building the mold for Angled Barbed Pipe Fitting?
For mass production molds, yes. We run the practical study in four stages — filling, then packing, then warpage, then cooling — and the cooling layout is designed from the result.
Quote Angled Barbed Pipe Fitting
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.