Vented Appliance Housing
White housing shell with a circular top aperture and a molded ventilation louvre bank.
Vented Appliance Housing
Vented Appliance Housing is one of the parts molded on tooling built at our Dongguan shop. White housing shell with a circular top aperture and a molded ventilation louvre bank.
Material arriving for this kind of tool is inspected on receipt, with steel hardness inspection and steel certification held on file against the job.
The mold is tried before it leaves us and the trial report is issued with a sample dimension report, so first-article data exists before anything is packed.
Key Benefits
- CNC, EDM, grinding and CMM equipment under one roof
- Final mold and packing inspection before the tool is shipped
- Steel certification and hardness inspection on incoming material
- A written DFM before fabrication, so changes happen while they are still cheap
Problems It Solves
- Cavity finishes agreed after the steel was cut instead of before
- Warpage found at assembly rather than in the cooling study
- A second source that has to be taught the program from the beginning
Who It Is For
- Small domestic appliance brands
- Office equipment and printer OEMs
- Air treatment and climate product makers
- Contract manufacturers assembling finished appliances
Application Scenarios
- Top covers and housings on visible product faces
- Grilles, louvres and vent panels
- Chassis and base panels carrying assemblies
- Handles, bezels and internal frame rails
How the Tool Behind Vented Appliance Housing Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Vented Appliance Housing |
|---|---|
| Reference on our catalogue | OA Part 6 |
| Category | Home & Office Appliance Parts |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Vented Appliance Housing is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Home & Office Appliance Parts
Appliance Internal Frame Rail
Black internal rail with a dense array of bosses, ribs and cable-routing features.
View details →
Appliance Handle Housing
Elongated dark housing with a central aperture and a soft-radius grip profile.
View details →
Transparent Blender Jug
Clear jug body with a molded handle, pour lip and internal measure ribs.
View details →
White Appliance Top Cover
Smooth white cover shell with a recessed control pocket and a clean parting line.
View details →Vented Appliance Housing — Buyer Questions
Can you handle the side actions this part needs?
Tools with several slides or lifters go through a mold motion simulation before the design review closes, so the open-to-close sequence is proven step by step rather than discovered at first trial.
Who do we talk to during the project?
Our engineering team has been trained on customer mold standards and corresponds in English. Response to customers is no later than 24 hours.
What will we receive when the mold for Vented Appliance Housing is tried?
Mold trial reports together with a sample dimension report (FAI). Those documents are what any later dimensional discussion is settled against.
Is a prototype tool worth it before the production mold?
It is when the design is not yet frozen. Rapid prototype mold making is one of our listed services, priced low and built for a fast lead time, and what the trial shows feeds the DFM for the production tool.
Quote Vented Appliance Housing
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.