Barbed Pipe Connector with Mounting Bracket
Barbed spigot connector with an integrated flat mounting bracket and clip.
Barbed Pipe Connector with Mounting Bracket
Barbed Pipe Connector with Mounting Bracket is one of the parts molded on tooling built at our Dongguan shop. Barbed spigot connector with an integrated flat mounting bracket and clip.
The product surface finish review and the part and steel tolerance review both sit inside the DFM, so the finish and the tolerances are agreed in writing before the cavity is finished.
The mold is tried before it leaves us and the trial report is issued with a sample dimension report, so first-article data exists before anything is packed.
Key Benefits
- ISO 9001:2015 quality management covering design, manufacture and service
- Steel certification and hardness inspection on incoming material
- Trial report with a sample dimension report (FAI) on delivery
- Engineering correspondence in English throughout the project
Problems It Solves
- A second source that has to be taught the program from the beginning
- Side actions that collide on the first close because the sequence was never simulated
- Tooling quoted without an engineering study, so the first trial is also the first analysis
Who It Is For
- Plumbing and sanitary system manufacturers
- Automotive and appliance fluid circuit suppliers
- Irrigation and water treatment equipment makers
- Assemblers sourcing a family of matched fittings
Application Scenarios
- Barbed connectors and tee pieces
- Threaded elbows and adaptor bodies
- Multi-port manifolds and valve housings
- Y connectors and branch fittings
How the Tool Behind Barbed Pipe Connector with Mounting Bracket Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Barbed Pipe Connector with Mounting Bracket |
|---|---|
| Reference on our catalogue | Pipe&Tube 1 |
| Category | Pipe & Tube Parts |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Barbed Pipe Connector with Mounting Bracket is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Pipe & Tube Parts
Angled Barbed Pipe Fitting
Angled fitting with deep-barbed run ends and a raised branch spigot.
View details →
Threaded Pipe Elbow Body
Elbow body with an external thread, a retaining collar and a molded inspection window.
View details →
Y Type Pipe Connector
Y connector with three externally threaded ports on a symmetrical split.
View details →
45 Degree Pipe Elbow with Flange
45-degree elbow with a flanged base and a molded-in identification panel.
View details →Barbed Pipe Connector with Mounting Bracket — Buyer Questions
How are molds packed for export?
Final mold inspection is followed by a packing inspection before the tool leaves. Ninety percent of our molds go to overseas markets, so export packing is the normal case here rather than the exception.
Can you supply replacement inserts for a tool already in production?
Precision components making with CNC and EDM machining is a service we sell on its own. Send the insert drawing or the 3D data and we will quote it as a component job.
Can you work to our own mold standard for Barbed Pipe Connector with Mounting Bracket?
Yes. Mold design follows your own standard where you have one, and otherwise a global standard such as DME / Meusburger / HASCO / Progressive / MISUMI. Naming the standard in the enquiry avoids re-specifying components later in the design.
Are you certified?
Yes — ISO 9001:2015, with the scope recorded on the certificate as: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts. The certificate is shown on our quality page.
Quote Barbed Pipe Connector with Mounting Bracket
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.