Two Cavity Mold Plate for Bowl Shaped Parts
Two-cavity plate with deep bowl forms and mirror-finished cavity walls.
Two Cavity Mold Plate for Bowl Shaped Parts
Two Cavity Mold Plate for Bowl Shaped Parts is one of the parts molded on tooling built at our Dongguan shop. Two-cavity plate with deep bowl forms and mirror-finished cavity walls.
The DFM we issue for a part like this carries the gating pictures, the main mold layout with dimensions, the parting and insert split lines and the ejection concept, and it goes to you for comment before fabrication starts.
3D data for this tool is issued in whichever format your own toolroom opens without translation: STEP, IGES, Parasolid, CATIA, SolidWorks.
Key Benefits
- A written DFM before fabrication, so changes happen while they are still cheap
- Final mold and packing inspection before the tool is shipped
- Standard components to DME / Meusburger / HASCO / Progressive / MISUMI so spares stay available locally
- ISO 9001:2015 quality management covering design, manufacture and service
Problems It Solves
- Tooling quoted without an engineering study, so the first trial is also the first analysis
- Suppliers who cannot read a mold standard written in English
- Tools shipped without a final inspection, arriving damaged and undocumented
Who It Is For
- Tool shops outsourcing overflow cavity and core work
- Mold owners needing spare or replacement inserts
- OEMs holding their own tools and buying consumable components
- Buyers needing electrode and insert work with an inspection record
Application Scenarios
- Cavity and core plates for production molds
- Slide blocks, lifters and shut-off inserts
- Core pins, blades and ground details
- Replacement inserts for tools already in production
How the Tool Behind Two Cavity Mold Plate for Bowl Shaped Parts Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Two Cavity Mold Plate for Bowl Shaped Parts |
|---|---|
| Reference on our catalogue | Mold Component 8 |
| Category | Mold Components |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Two Cavity Mold Plate for Bowl Shaped Parts is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Mold Components
Mirror Polished Two Cavity Plate
Two-cavity plate finished to a mirror polish across the full molding surface.
View details →
Polished Cavity Insert for Automotive Trim
Machined and polished insert carrying a long automotive trim form with sharp shut-offs.
View details →
Cavity Plate for Appliance Panel
Large cavity plate with a deep panel form, guide bores and a full cooling pattern.
View details →
Mold Plate with Lamp Housing Cavity
Plate carrying a curved lamp housing cavity with slide pockets and ejector bores.
View details →Two Cavity Mold Plate for Bowl Shaped Parts — Buyer Questions
Do you run MoldFlow before building the mold for Two Cavity Mold Plate for Bowl Shaped Parts?
For mass production molds, yes. We run the practical study in four stages — filling, then packing, then warpage, then cooling — and the cooling layout is designed from the result.
Can you handle the side actions this part needs?
Tools with several slides or lifters go through a mold motion simulation before the design review closes, so the open-to-close sequence is proven step by step rather than discovered at first trial.
How are molds packed for export?
Final mold inspection is followed by a packing inspection before the tool leaves. Ninety percent of our molds go to overseas markets, so export packing is the normal case here rather than the exception.
How do you inspect the steel used for Two Cavity Mold Plate for Bowl Shaped Parts?
Incoming material inspection first, then steel hardness inspection with steel certification, then dimensional inspection after machining. Electrodes are inspected for dimension and surface finish before they are used.
Quote Two Cavity Mold Plate for Bowl Shaped Parts
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.