Two Shot Handheld Device Enclosure
Front and rear enclosure halves molded with hard and soft zones in register.
Two Shot Handheld Device Enclosure
Two Shot Handheld Device Enclosure is one of the parts molded on tooling built at our Dongguan shop. Front and rear enclosure halves molded with hard and soft zones in register.
3D data for this tool is issued in whichever format your own toolroom opens without translation: STEP, IGES, Parasolid, CATIA, SolidWorks.
Quality control on a part like this starts at the initial stage rather than at final inspection, and runs through pre-DFM, mold design, fabrication, trials and the final check before delivery.
Key Benefits
- One shop from design through trial, with no tool transfer between vendors
- A written DFM before fabrication, so changes happen while they are still cheap
- Reply to every enquiry inside 24 hours
- CNC, EDM, grinding and CMM equipment under one roof
Problems It Solves
- Tools shipped without a final inspection, arriving damaged and undocumented
- Suppliers who cannot read a mold standard written in English
- Long silences between the purchase order and the first sign of progress
Who It Is For
- Handheld instrument and terminal manufacturers
- Power tool and equipment brands
- Consumer electronics enclosure suppliers
- Any OEM replacing an assembled soft grip with an over-mold
Application Scenarios
- Handheld terminal and scanner housings
- Soft-grip tool handles
- Contrast keypads and control fascias
- Rigid-plus-elastomer sealing components
How the Tool Behind Two Shot Handheld Device Enclosure Is Built
- Design
Full 3D mold design completed to one hundred percent and checked in a design review meeting.
- DFM and MoldFlow
A written DFM for your comment, and filling, packing, warpage and cooling analysis on mass production tools.
- Machining
CNC and EDM work with steel inspected dimensionally after machining and electrodes inspected before burning.
- Trial and inspection
Mold trial with trial report and sample dimension report, then final mold and packing inspection.
Technical Data
The source material for this site records the part, its category and the photograph. Dimensions, resin grade, cavity count and tolerances are project data and are confirmed in the quotation.
| Product name | Two Shot Handheld Device Enclosure |
|---|---|
| Reference on our catalogue | 2K Parts 3 |
| Category | Two-Shot (2K) Parts |
| Process | Plastic injection molding |
| Tooling built by | Dongguan JEC Mold Co., Limited, Dongguan, China |
| Designed tool life | More than 1 million shots |
| Mold standard | Customer standard, or DME / Meusburger / HASCO / Progressive / MISUMI |
| Design data formats | STEP, IGES, Parasolid, CATIA, SolidWorks |
| Quality system | ISO 9001:2015 — Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts |
| Part dimensions | TBC — confirmed in the quotation |
| Resin or alloy grade | TBC — confirmed in the quotation |
| Cavity count | TBC — confirmed in the quotation |
| Dimensional tolerance | TBC — confirmed in the quotation |
| Surface finish | TBC — confirmed in the quotation |
| Annual volume | TBC — confirmed in the quotation |
What Is Checked
- Customer mold specification and requirement review and discussion during the kick-off meeting
- 3D and 2D mold design review meeting before the design is sent to you, and a final check before fabrication
- Incoming material inspection
- Steel hardness inspection and steel certification
- Electrode dimension and surface finish inspection
- Steel dimension inspection after machining
- Mold trial reports with a sample dimension report (FAI)
- Final mold inspection and packing inspection
Certification
ISO 9001:2015 — scope: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts.
Customization
Mold standard, cavity count, gating strategy, surface finish and mold base supplier are all specified per project. Tell us what your own standard requires and it is folded into the DFM rather than handled as a change later.
Compared With a Prototype Tool
A production mold for Two Shot Handheld Device Enclosure is built to run for more than 1 million shots and is documented with a trial report and a sample dimension report. A rapid prototype mold answers a different question — is the design right — at a lower price and a faster lead time, and is not built for that life. If the design is still moving, the prototype stage is usually the cheaper route into the production tool.
Rapid Prototype MoldsUse Guide
- Send 3D part data in STEP, IGES, Parasolid, CATIA, SolidWorks
- State the resin or alloy, the annual volume and the mold standard
- Comment on the DFM before fabrication — that is the cheapest point to change anything
- Review the trial report and sample dimension report against your own drawing before release
- Keep the mold standard on file so spares stay available locally
Others in Two-Shot (2K) Parts
Two Shot Power Tool Handle
Power tool handle with a rigid core and an over-molded soft grip.
View details →
Two Shot Keypad Housing
Keypad housing with contrast key fields molded into the front shell.
View details →
Two Shot Scanner Grip Housing
Scanner grip housing with a rigid body and an over-molded contrast grip.
View details →
Two Shot Ribbed Panel
Curved panel combining a rigid frame with a ribbed contrast surface in one tool.
View details →Two Shot Handheld Device Enclosure — Buyer Questions
Are you certified?
Yes — ISO 9001:2015, with the scope recorded on the certificate as: Design, Manufacture and Service of Injection Molded Moulds; Manufacture and Service of Plastic Injection Molded Parts. The certificate is shown on our quality page.
What will we receive when the mold for Two Shot Handheld Device Enclosure is tried?
Mold trial reports together with a sample dimension report (FAI). Those documents are what any later dimensional discussion is settled against.
Who do we talk to during the project?
Our engineering team has been trained on customer mold standards and corresponds in English. Response to customers is no later than 24 hours.
Can you supply replacement inserts for a tool already in production?
Precision components making with CNC and EDM machining is a service we sell on its own. Send the insert drawing or the 3D data and we will quote it as a component job.
Quote Two Shot Handheld Device Enclosure
Send the 3D data, the resin and the annual volume. A professional quotation with technical comment comes back within two working days.