Material and Mould
Single-Sided Self-Adhesive Aluminum Foil
Pressure Sensitive Shielding Foil With Release Liner
View specifications →
Double-Sided Self-Adhesive Aluminum Foil
Two Adhesive Faces for Lamination Bonding and Shielding
Product Overview
What This Product Is
This composite carries a high-performance pressure-sensitive adhesive on both faces, usually over a central carrier such as polyester film for strength and stability. Because both sides bond, it does two jobs at once: it shields, and it laminates one layer to another. That makes it useful beyond cable — insulation bonding and sealing, heat and vapour barriers in HVAC and construction, and vibration and noise reduction in automotive and industrial equipment.
Material and MouldShielding Foil and Tape
Key Benefits
What It Gives Your Production Line
Bonds and Shields in One Step
Adhesive on both sides removes a separate bonding operation during lamination.
Carrier Adds Strength
A central carrier such as polyester film gives the construction added strength and stability.
Thermal and Shielding Performance Together
Superior thermal conductivity alongside shielding effectiveness, which suits barrier applications.
Clean Liner Removal
Easy to apply, with clean removal of the liner so the adhesive is not disturbed.
Application Scenarios
Where It Is Used
- Shielding and grounding in electronic cables and assemblies
- Bonding and sealing of insulation materials
- Heat and vapour barrier in HVAC and construction systems
- Vibration and noise reduction in automotive and industrial equipment
Who It Is For
Who Buys It
- Cable and harness assemblers laminating shield layers
- HVAC and insulation fabricators
- Automotive and industrial equipment manufacturers
Problems It Solves
The Reasons Buyers Move To This Product
Separate Glue Steps Slow the Line
Applying adhesive as a separate operation adds time and mess. A two-sided tape combines the steps.
Laminates Peel Apart in Service
Strong adhesion on both faces holds the layers together under thermal cycling.
Moisture and UV in Building Work
The material is moisture, chemical and UV resistant, which suits construction and HVAC use.
Technical Features
Construction And Materials
- Two layers of aluminium foil laminated with pressure-sensitive adhesive on both sides
- Typically built around a central carrier such as polyester film
- Excellent thermal insulation and moisture resistance
- EMI and RFI shielding
- Strong adhesion on both sides for easy lamination and bonding
- Moisture, chemical and UV resistant
- Easy to apply with clean removal of liner
Certifications And Compliance
No product certification is claimed for this item beyond the standards named in the specification table. Where a specific certificate is required for your market, ask before ordering and we will confirm what can be provided.
Specifications
Published Figures
| Structure | Two aluminium foil layers with pressure-sensitive adhesive on both sides |
|---|---|
| Carrier | Typically polyester film for added strength and stability |
| Shielding | EMI and RFI shielding |
| Thermal Performance | Thermal insulation with superior thermal conductivity through the foil |
| Resistance | Moisture, chemical and UV resistant |
| Liner | Clean-removal release liner |
| Applications | Cable shielding and grounding, insulation bonding, HVAC vapour barrier, vibration damping |
Figures are the published specification for this product. Values outside this table are confirmed in writing before order rather than estimated.
Manufacturing And Quality Control
How It Is Produced And Checked
Materials are produced to the stated thickness, width and formulation, then slit, wound and packed to the reel or core size ordered. Dimensional checks are made against the specification before dispatch.
Incoming Material
Foil, film, compound or wire checked for thickness and surface condition before processing.
Processing
Coating, lamination, slitting or drawing to the ordered dimension.
Dimensional Check
Width, thickness and roll or reel diameter verified against the specification.
Performance Reference
Shielding attenuation and conductivity referenced to the published figures for the grade.
Packing
Shaft or reel packing in cartons for safe handling and transport.
Customisation Options
What Can Be Changed
- Slitting width
- Foil and carrier thickness
- Adhesive formulation for the bonding substrate
- Roll length and core size
Use Guide
Working With It On Your Line
- Test adhesion on the actual substrate before production; foil sticks differently to insulation, metal and jacket compound.
- Apply with even pressure across the full width so no air is trapped between layers.
- Remove the liner immediately before bonding, not in advance.
- Where the joint carries load, allow the adhesive its full dwell time before handling.
Comparison
How It Compares Within The Range
Double-Sided Self-Adhesive Aluminum Foil sits inside the Material and Mould range. The products below are the closest alternatives or the parts most often ordered alongside it — compare the published specification tables rather than the descriptions when the choice is close.
FAQ
Double-Sided Self-Adhesive Aluminum Foil FAQ
What is the structure of this material?
Two layers of aluminium foil laminated with a high-performance pressure-sensitive adhesive on both sides, typically with a central carrier such as polyester film.
Where is it used outside cable manufacturing?
Bonding and sealing insulation materials, heat and vapour barriers in HVAC and construction, and vibration and noise reduction in automotive and industrial equipment.
Is it UV resistant?
Yes. The material is moisture, chemical and UV resistant.
Does the liner come off cleanly?
Yes, it is designed for easy application with clean removal of the liner.
Can it be used for grounding?
It is used for shielding and grounding in electronic cables and assemblies.
Request A Quotation For Double-Sided Self-Adhesive Aluminum Foil
Send the construction, grade and quantity you need. We confirm the specification in writing before quoting.