Material and Mould
Double-Sided Self-Adhesive Aluminum Foil
Two Adhesive Faces for Lamination Bonding and Shielding
View specifications →
Single-Sided Self-Adhesive Aluminum Foil
Pressure Sensitive Shielding Foil With Release Liner
Product Overview
What This Product Is
This is aluminium foil coated on one side with a pressure-sensitive adhesive and protected by a release liner. It shields, it grounds, and because it sticks, it can be applied by hand as well as on a machine — which is why it is used for shielding repairs and reinforcement as well as production wrapping. Foil thickness runs 6 to 25 μm, adhesive is acrylic or rubber-based, and standard temperature range is -20°C to +120°C.
Material and MouldShielding Foil and Tape
Key Benefits
What It Gives Your Production Line
Sticks Where Tape Has to Stay Put
High-tack pressure-sensitive adhesive bonds securely to cable jackets and cores.
Conforms to Awkward Shapes
Flexible enough to wrap irregular shapes and small diameters without cracking.
Conductive Adhesive Option
A conductive adhesive version is available where electrical continuity through the bond is needed for shielding and grounding.
Works as a Field Repair Material
Used for shielding repairs and jacket reinforcement in fieldwork as well as on production lines.
Application Scenarios
Where It Is Used
- Shielding layer for LAN, coaxial, control and instrumentation cables
- Grounding and wrapping to improve signal integrity
- Shielding repair and outer jacket reinforcement
- Anti-interference wrapping in sensitive electronic or data cables
Who It Is For
Who Buys It
- Cable plants needing an adhesive-backed shield layer
- Assembly and repair shops working on finished cable
- Electronics manufacturers shielding harnesses and enclosures
Problems It Solves
The Reasons Buyers Move To This Product
Shield Gaps After Repair
A cut shield cannot be re-braided in the field. Adhesive foil restores continuity on the spot.
Tape Lifting on Small Diameters
High-tack adhesive and a conformable foil keep the wrap in place around tight radii.
Continuity Through the Adhesive
Where the bond itself must conduct, the conductive adhesive option solves it rather than relying on mechanical contact.
Technical Features
Construction And Materials
- Single layer aluminium foil with pressure-sensitive adhesive on one side
- Protected by a release liner for easy handling
- Excellent EMI and RFI shielding from the aluminium layer
- Strong adhesion to cable jackets and cores
- Flexible and conformable around irregular shapes and small diameters
- Moisture and chemical resistant barrier
- Optional conductive adhesive for electrical continuity
Certifications And Compliance
No product certification is claimed for this item beyond the standards named in the specification table. Where a specific certificate is required for your market, ask before ordering and we will confirm what can be provided.
Specifications
Published Figures
| Aluminium Foil Thickness | 6 μm – 25 μm |
|---|---|
| Adhesive Type | Acrylic or rubber-based |
| PET Thickness | 12 μm – 25 μm |
| Width | 5 mm – 50 mm |
| Core Inner Diameter | 53 mm or 76 mm |
| Temperature Resistance | -20°C to +120°C standard |
| Release Liner | PET film |
| Effective Frequency Band | 1 – 100 MHz |
| Shielding Attenuation | Up to 70 dB when used with Mylar foil |
| Colours | Blue and silver standard; red, green, gold and printed options available |
Figures are the published specification for this product. Values outside this table are confirmed in writing before order rather than estimated.
Manufacturing And Quality Control
How It Is Produced And Checked
Materials are produced to the stated thickness, width and formulation, then slit, wound and packed to the reel or core size ordered. Dimensional checks are made against the specification before dispatch.
Incoming Material
Foil, film, compound or wire checked for thickness and surface condition before processing.
Processing
Coating, lamination, slitting or drawing to the ordered dimension.
Dimensional Check
Width, thickness and roll or reel diameter verified against the specification.
Performance Reference
Shielding attenuation and conductivity referenced to the published figures for the grade.
Packing
Shaft or reel packing in cartons for safe handling and transport.
Customisation Options
What Can Be Changed
- Foil thickness 6 to 25 μm
- Acrylic or rubber-based adhesive
- Conductive adhesive option
- Width 5 to 50 mm
- Core inner diameter 53 mm or 76 mm
- Colour and printing
Use Guide
Working With It On Your Line
- Clean and dry the surface before application; adhesive foil will not bond through oil or release agent.
- Peel the liner progressively rather than all at once so the foil does not crease.
- Overlap each wrap by at least the width your construction specifies to keep shielding continuous.
- Keep rolls within the stated temperature range in storage so the adhesive does not dry out.
Comparison
How It Compares Within The Range
Single-Sided Self-Adhesive Aluminum Foil sits inside the Material and Mould range. The products below are the closest alternatives or the parts most often ordered alongside it — compare the published specification tables rather than the descriptions when the choice is close.
Read Next
Applications Solutions And Guides
FAQ
Single-Sided Self-Adhesive Aluminum Foil FAQ
What foil and PET thicknesses are available?
Aluminium foil from 6 to 25 μm and PET from 12 to 25 μm, in widths of 5 to 50 mm.
Which adhesive types can I order?
Acrylic or rubber-based pressure-sensitive adhesive, with a conductive adhesive option for electrical continuity.
What temperature range does it withstand?
-20°C to +120°C as standard.
What core sizes are used?
Core inner diameters of 53 mm or 76 mm.
Can it be used for repair work?
Yes. It is used for shielding repairs and for reinforcing the outer jacket in fieldwork as well as on production lines.
Request A Quotation For Single-Sided Self-Adhesive Aluminum Foil
Send the construction, grade and quantity you need. We confirm the specification in writing before quoting.