Semi-Finished Coaxial Cable
Semi-Finished Coaxial Cable RG6
75 Ohm CATV Core Ready for Your Own Shielding and Jacket
View specifications →
CATV and Broadband Networks
Cores For Drop Distribution And Trunk Cable
Industry Pain Points
What Goes Wrong In This Sector
Pain Point 01
Signal budget has to survive a full trunk-to-drop chain, so attenuation figures per construction matter more than a catalogue heading.
Pain Point 02
Operators specify cable against local fire and installation rules, which change the jacket rather than the core.
Pain Point 03
Tenders swing between bare copper and clad conductors depending on the budget.
Customer Requirements
What Buyers In This Sector Ask For
- Consistent attenuation from reel to reel
- A full RG range from drop to trunk
- Conductor grade options within one geometry
- Reels packed for container export
Our Approach
How The Supply Model Answers It
Buy the 75 ohm core family — RG6 for drops, RG7 and RG11 for distribution and trunk — with the conductor grade and shield depth set per order. Jacket, print and classify in your own plant. Shielding foil and braiding wire come from the same supplier, so the shield you specify is the shield you can buy.
The Supply ProgrammeRecommended Products
Products Used In This Sector
Semi-Finished Coaxial Cable
Semi-Finished Coaxial Cable RG7
Trunk Grade Foamed PE Core for CATV Backbone Cable
View specifications →
Semi-Finished Coaxial Cable
Semi-Finished Coaxial Cable RG11
Low Loss 75 Ohm Trunk Core for Long Distance Distribution
View specifications →
Semi-Finished Coaxial Cable
Semi-Finished Coaxial Cable RG59
75 Ohm Core for Analogue Video and CCTV Production
View specifications →
Semi-Finished Coaxial Cable
Foamed Insulation Coaxial Cable Core
Conductor Plus Foamed Dielectric Before Shielding and Braiding
View specifications →Delivery Capability
How Orders Are Produced And Shipped
Specification agreed in writing, a first reel produced to that specification, then repeat batches against the same code with reel numbers recorded. Reels are film-wrapped on wooden, plastic or ABS drums with carton or pallet options for container loading.
Specification
Construction, grade, shield build and reel format fixed before production.
First Reel
A sample reel lets you set your jacketing line before volume.
Repeat Batches
Same specification code, reel numbers recorded for traceability.
Packing
Film-wrapped reels, cartons or pallets for container loading.
FAQ
CATV and Broadband Networks FAQ
Which core suits a drop cable?
RG6 at approximately 6.5 dB/100m at 100 MHz over a DC to 1 GHz range.
And for trunk runs?
RG11 at approximately 4.8 dB/100m, or RG7 at about 4.2 dB/100m across 5 to 1000 MHz.
Can we specify quad-shield?
Yes, on RG6, RG59, RG7, RG8 and RG11, alongside standard and tri-shield builds.
Discuss Cable Supply For CATV and Broadband Networks
Send the constructions you build and the volumes you run. We will confirm which cores and materials fit.