Woodworking Finishing Machinery Since 1999
INCRI MachineryRequest A Quote
INCRI automatic UV roller coating line with conveyor, coater and dryer sections
Full Catalogue

All 103 INCRI Finishing Machines

Every machine in the range, grouped by category, on one page. Nothing is paginated and nothing is left out. Each one is built to order.

Request A QuoteDownload Catalogue
13 machines

Automatic Machine

Loading, transferring, turning and returning panels. These are the machines between the machines, and they are where the last manual labour in a finishing plant usually sits.

Open Automatic Machine Category Page
2 machines

Automatic Spraying Line

A complete spray line for primer and top coat on shaped door and cupboard fronts, run by three operators instead of a shop full of painters.

Open Automatic Spraying Line Category Page
3 machines

Back Coating Machine

Sealing the underside of flooring and panel so moisture from the subfloor cannot enter and cup the board.

Open Back Coating Machine Category Page
3 machines

Brush Sanding Machine

Disc brush sanding that reaches into raised panel fields, coves and routed grooves that a flat belt rides straight over.

Open Brush Sanding Machine Category Page
24 machines

Coating Machine

Everything that puts liquid coating on a flat panel: roller coaters, curtain coaters, putty filling, staining and back coating.

Open Coating Machine Category Page
5 machines

Conveyor Machine

Roller and belt conveyors that link machine transport systems into one continuous line, plus the dust cleaning that belongs with them.

Open Conveyor Machine Category Page
5 machines

Curtain Coating Machine

A falling curtain of varnish that lays a film down to 0.05 mm with nothing touching the wet surface, which is why it is used for high gloss.

Open Curtain Coating Machine Category Page
3 machines

Curve return line Machine

90 and 180 degree return tables that bring the panel back to the loading operator so one person can run the machine.

Open Curve return line Machine Category Page
10 machines

Dryer Machine

IR levelling, vertical drying and UV curing. Whatever the coating needs, from seconds under a lamp to minutes on a tray.

Open Dryer Machine Category Page
3 machines

Dust Clean Machine

Brush and blow cleaning that takes sanding dust off the panel immediately before coating, which is where most nib complaints start.

Open Dust Clean Machine Category Page
3 machines

Gantry Type loading Machine

Vacuum gantry loaders that strip, palletise, steer and move panels up to 200 kg between a stack and a machine.

Open Gantry Type loading Machine Category Page
2 machines

IE Heater Machine

Infrared heating and levelling tunnels that flow the wet film flat and drive out bubbles before the panel reaches the UV lamps.

Open IE Heater Machine Category Page
2 machines

Inert Coating Line

Inert technology lines that give decorative panels a high gloss, matt or skin feeling surface with a film that costs far less than PET.

Open Inert Coating Line Category Page
3 machines

Panel turnover machine

Hydraulic flippers that turn a 60 kg panel up to 7 times a minute so both faces can be finished without manual handling.

Open Panel turnover machine Category Page
4 machines

Power Translation Roller Table

Powered transfer tables that steer panels 90 degrees between two machines without a manual lift.

Open Power Translation Roller Table Category Page
4 machines

Precise Stain Machine

Brush roller stain machines that work colour into the pore of the wood so the grain reads clearly instead of looking washed out.

Open Precise Stain Machine Category Page
10 machines

Primer Sanding Machine

Floating head sanders set up to shave cured primer flat without cutting through to the substrate at the panel edge.

Open Primer Sanding Machine Category Page
2 machines

Profile Spraying Machine Line

A spray line for irregular shaped wood doors and kitchen cupboard fronts, in a 6 by 18 metre working area on 70 kW.

Open Profile Spraying Machine Line Category Page
2 machines

Putty Machine

Putty filling machines that close open pores and pinholes at 10 to 30 grams per square metre, at constant pressure across varying panel thickness.

Open Putty Machine Category Page
2 machines

Roller Coater Line

A complete UV roller coating line rated at 5000 square metres a day with 100 percent paint recycling and zero VOC.

Open Roller Coater Line Category Page
10 machines

Roller Coater Machine

One, two and three head roller coaters that hold 5 to 10 grams per square metre and recycle the paint that does not transfer.

Open Roller Coater Machine Category Page
13 machines

Sanding Machine

Wide belt, primer and brush sanders from 600 to 1300 mm working width, for calibration, primer sanding and profiled work.

Open Sanding Machine Category Page
8 machines

Spray Painting Machine

Reciprocating spray machines with photoelectric workpiece detection, sealed booths and exhaust, from narrow profile stock to 2400 mm door leaves.

Open Spray Painting Machine Category Page
5 machines

UV Dryer Machine

UV curing tunnels from one to six lamps, each lamp group separately cooled, connecting directly to a roller or curtain coater.

Open UV Dryer Machine Category Page
12 machines

Vacuum Membrane Press Machine

Membrane presses that pull PVC and PET film into deep routed grooves under negative pressure, in a 2 to 4 minute cycle.

Open Vacuum Membrane Press Machine Category Page
3 machines

Vertical Drying Machine

Stacked tray dryers that buy long leveling time in a fraction of the floor length a horizontal tunnel would need.

Open Vertical Drying Machine Category Page
10 machines

Wide Belt Sanding Machine

Wide belt sanders with two and three floating heads, 600 to 1300 mm, for calibrating and finishing panel in a single pass.

Open Wide Belt Sanding Machine Category Page
8 machines

Wire Brush Machine

Drawing and polishing rollers that cut out the soft grain and raise a skid free, three dimensional texture on solid wood and synthetic board.

Open Wire Brush Machine Category Page

Not Sure Which Machine Fits Your Panel

Send your panel size, coating system and target output and an engineer will shortlist the machines that actually apply.

Request A QuoteEmail An Engineer