180 degree Curve return line Machine Return production Line for woodworking
90 and 180 degree return table that sends the panel back to the operator. Built to order.
View Machine Data →
Automatic Machine
Automatic heavy duty gantry loading machine gantry type loading stacker loading
Vacuum gantry that strips, palletises and moves panels up to 200 kg. The heavy duty build, rated for the full 200 kg load.
Product Overview
Gantry Type Loading Machine For Heavy Duty Loading And Stacking
The heavy duty build, rated for the full 200 kg load.
An automatic gantry loading machine that strips, palletises, steers and moves panels so the line does not need manual loading. It works with sanders, sawing machines and glue coating machines to make an automatic connection, with a large span and a heavy load capacity of 200 kg. Siemens electrics, AirTAC cylinders and German P+F photoelectrics handle the control.
ILM4-3500With servo motorsWith sponge type vacuum pads
Key Benefits
What This Machine Changes On Your Floor
1
Siemens electrics, AirTAC cylinders and German P+F photoelectrics for accurate control
2
Two vacuum pad types: rubber round, and sponge for small, irregular or air permeable boards
3
Automatic stripping, palletising, steering and moving of panels
4
200 kg maximum load and a large span for full size sheets
5
Connects to sanders, saws and glue coating machines for a flexible combination
Who It Is For
Plants That Buy This Machine
- Door factories feeding a sander or coating line from a stack
- Plants handling boards that a standard vacuum pad will not lift
- Panel plants automating the loading and unloading stations
Problems It Solves
What It Removes From Your Process
- Heavy panels are stacked by hand and the plant carries the injury risk
- Air permeable and irregular boards will not hold on a standard vacuum pad
- Loading and unloading is the last manual job in an otherwise automatic line
Application Scenarios
Typical Jobs It Runs
Palletising finished panels at the end of a coating line
Loading a sawing machine from a pallet
Stripping panels off a stack and feeding a wide belt sander
Technical Features
How It Is Built
- Rubber round vacuum pad standard, sponge type available
- Cooperates with sanders, sawing machines and glue coating machines
- Automatic stripping, palletising, steering and moving
- Servo motors optional
- Siemens electric appliances, AirTAC cylinders, German P+F photoelectric sensors
Specifications
Technical Data
| Parameter | Value |
|---|---|
| Model | ILM4-3500 |
| Dimension | 4700×3700×2800mm |
| Processing Length | 300-2440mm |
| Processing Width | 250-1220mm |
| Processing Thickness | 5-60mm |
| Max. Loading | 200kg |
| Processing Speed | 8Times/min |
| TTotal Power | 10.2kw |
| Net Weight | 2300kg |
All machines can be customised to the buyer's requirement. Figures are the published data for this model series.
Quality Control
Checked Before It Leaves The Floor
- Vacuum pad holding force tested at the 200 kg rating
- Photoelectric positioning accuracy verified
- Cycle rate measured against the 8 per minute figure
Customisation Options
Specified Per Order
- Servo motor option
- Rubber round or sponge type vacuum pads
- Span and stroke set for your stack and machine positions
Comparison
How It Compares With The Alternatives
vs Manual loading
A 200 kg panel handled 8 times a minute is beyond what manual loading can sustain safely
vs Panel turnover machine
The gantry picks and stacks between machines. The turnover machine flips a panel in place
Use Guide
Setting The Machine Up For A Run
Choose the vacuum pad type for your board: sponge for air permeable or irregular surfaces
Set the stack and target positions in the control
Confirm panel weight and size fall inside the rated range
Run a test cycle before connecting to the downstream machine
Related Machines
Curve return line Machine Return production Line for Edge Bander Machine
90 and 180 degree return table that sends the panel back to the operator. Built to order.
View Machine Data →
Curve return line Machine Return Line Automatic
90 and 180 degree return table that sends the panel back to the operator. Built to order.
View Machine Data →
Wooden Door Series-Powered Roller Conveyor with Translation Device power conveyor roller
Powered transfer table that moves panels 90 degrees between two machines. Built to order.
View Machine Data →
Questions About This Machine
Is this model set up for heavy duty loading and stacking?
Yes. The heavy duty build, rated for the full 200 kg load. Every machine is built to order, so the configuration is confirmed against your own panel size and coating system before production.
What is the cycle rate?
Under 8 times per minute.
Are servo motors available?
Yes, as an option.
How heavy a panel can it lift?
Up to 200 kg.
What if my board is air permeable?
Sponge type vacuum pads are available, and they suit small workpieces, irregular surfaces and air permeable board.
What machines can it feed?
It cooperates with sanders, sawing machines, glue coating machines and other models to make an automatic connection.
Ask For A Quotation On The Automatic Heavy Duty Gantry Loading Machine Gantry Type Loading Stacker Loading
Send your panel size, coating system and line speed. You will get the model recommendation, full technical data and a price.