Woodworking Furniture Spray painting machine Panel Spraying machine for UV PE
Enclosed reciprocating spray booth that paints 1300 mm panels at a controlled film weight. Built to order.
View Machine Data →
Spray Painting Machine
Reciprocating Paint Spraying Equipment Spray painting machine Panel Spraying machine for
Enclosed reciprocating spray booth that paints 1300 mm panels at a controlled film weight. The reciprocating panel build for UV, PE and NC paint.
Product Overview
Reciprocating Spray Painting Machine 1300 mm For Reciprocating Panel Spraying For Uv Pe Nc
The reciprocating panel build for UV, PE and NC paint.
A reciprocating spray painting machine for panel work up to 1300 mm wide. Guns travel on an oscillating arm above a belt type roller conveyor while a photoelectric system measures the incoming workpiece and controls when and where the guns fire, so paint is not sprayed at empty belt. The sealed paint room with air exhaust keeps dust out of the wet film.
ITSII-1300
Key Benefits
What This Machine Changes On Your Floor
1
Fire proof lighting is installed inside the spraying room
2
Graphical interface for entering working and equipment parameters
3
Photoelectric induction detects workpiece length and controls painting time and range
4
Sealed paint room with air exhaust prevents dust entering and lifts finish quality
5
Film thickness is precisely controlled and the paint can be recycled
Who It Is For
Plants That Buy This Machine
- Finishers who need repeatable film weight across a shift
- Cabinet and door plants spraying UV, PU, PE or NC paint
- Furniture factories moving off manual spray guns
Problems It Solves
What It Removes From Your Process
- Dust from the workshop settles into the wet film in an open booth
- Manual spraying wastes paint at the leading and trailing edge of every panel
- Film thickness varies between operators and between shifts
Application Scenarios
Typical Jobs It Runs
Applying UV top coat where roller coating would leave marks
Spraying flat cabinet fronts at 1300 mm width
Painting door leaves in a continuous belt fed line
Technical Features
How It Is Built
- Reciprocating speed up to 120 m per minute
- Belt type roller conveyor for high speed feed
- Photoelectric workpiece detection controlling paint timing and range
- Sealed paint room with air exhaust system
- Fire proof lighting inside the spraying room
- Graphical operator interface
Specifications
Technical Data
| Parameter | Value |
|---|---|
| Model | ITSII-1300 |
| Working Table Height | 900mm |
| Max.Paint Width | 1300mm |
| Max.Processing Thickness | 100mm |
| Feeding Speed | 1-6m/min |
| Reciprocating Speed | 0-120m/min |
| Min.Processing Length | 300mm |
| Pressure Pump | 0.6-0.8Mpa |
| Working Air Pressure | 0.6-0.8Mpa |
| Air Consumption | 900L/min |
| TTotal Power | 14.75KW |
| Dimension(Length x Width x Height) | 5600x5300x3320mm |
All machines can be customised to the buyer's requirement. Figures are the published data for this model series.
Quality Control
Checked Before It Leaves The Floor
- Photoelectric detection tested with workpieces of different length
- Gun travel and reciprocating speed verified across the range
- Exhaust airflow and booth sealing checked before shipment
Customisation Options
Specified Per Order
- Gun count and arrangement on the oscillating arm
- Paint supply configured for UV, PU, PE or NC
- Conveyor height set to match your line
Comparison
How It Compares With The Alternatives
vs Manual spray booth
Photoelectric control means paint fires only over the workpiece, and film weight does not change with the operator
vs Roller coater
Spraying reaches edges and shaped faces a roller cannot touch, at the cost of more air handling
Use Guide
Setting The Machine Up For A Run
Set air supply between 0.6 and 0.8 MPa and confirm 900 L per minute is available
Enter the working parameters on the graphical interface
Run a test panel and measure film weight
Check the exhaust filters at every shift change
Related Machines
Woodworking Furniture Panel Spraying machine Spray painting machine
Enclosed reciprocating spray booth that paints 1300 mm panels at a controlled film weight. Built to order.
View Machine Data →
Automatic UV PE Spray painting Machine Slightness Surface Wood Furniture Spraying
Long bed reciprocating sprayer built around a 2400 mm door leaf. Built to order.
View Machine Data →
Automatic Woodworking Spray Painting Machine Reciprocating UV Wood Furniture Cabinet CNC
Long bed reciprocating sprayer built around a 2400 mm door leaf. Built to order.
View Machine Data →
Questions About This Machine
Is this model set up for reciprocating panel spraying for UV PE NC?
Yes. The reciprocating panel build for UV, PE and NC paint. Every machine is built to order, so the configuration is confirmed against your own panel size and coating system before production.
What paints can I run?
UV, PU, PE and NC. The paint can be recycled.
What is the machine footprint?
5600 x 5300 x 3320 mm.
What is the widest panel it can spray?
Max paint width is 1300 mm.
How much compressed air does it need?
0.6 to 0.8 MPa with an air consumption of 900 L per minute.
How does it avoid spraying empty belt?
A photoelectric induction system detects the length of incoming workpieces and controls the time and range of painting.
Ask For A Quotation On The Reciprocating Paint Spraying Equipment Spray Painting Machine Panel Spraying Machine for
Send your panel size, coating system and line speed. You will get the model recommendation, full technical data and a price.