180 degree Curve return line Machine Return production Line for woodworking
90 and 180 degree return table that sends the panel back to the operator. Built to order.
View Machine Data →
Automatic Machine
Powered Conveyor Transfer Roller table power translation roller table
Powered transfer table that moves panels 90 degrees between two machines. The standard power translation roller table configuration.
Product Overview
Power Translation Roller Table For Power Translation Roller Table
The standard power translation roller table configuration.
A powered roller table with a translation device, used for 90 degree steering in panel conveying. Rubber coated rollers and a synchronous rubber conveyor belt move the panel without damaging the face. The ICGP-2500 takes panels 300-2440 mm long and 250-1220 mm wide at 5-30 m per minute on 0.85 kW.
ICGP-2500
Key Benefits
What This Machine Changes On Your Floor
1
0.85 kW connected load and only 450 kg, so it fits almost anywhere in a line
2
90 degree translation steering without a manual lift
3
Rubber coated roller and synchronous rubber belt protect the panel face
4
Suits panels of different specifications without re-setting
Who It Is For
Plants That Buy This Machine
- Panel lines with machines set at right angles
- Door plants connecting a sander to a coating line
- Plants automating transfer to cut handling damage
Problems It Solves
What It Removes From Your Process
- Two machines sit at right angles and panels are lifted between them by hand
- Panel faces get scuffed during manual transfer
- Transfer is the slow step that holds up both machines
Application Scenarios
Typical Jobs It Runs
Transferring panels from a sander to a roller coater at 90 degrees
Feeding a return line from a main conveyor
Moving door panels between two stages of a finishing line
Technical Features
How It Is Built
- Working pressure 0.8 MPa
- Rubber coated rollers with synchronous rubber conveyor belt
- 90 degree translation steering
- Suitable for panel commutation of different specifications
Specifications
Technical Data
| Parameter | Value |
|---|---|
| Model | ICGP-2500 |
| Equipment size | 2500X1500X900 |
| Panel length | 300-2440mm |
| Panel width | 250-1220mm |
| Panel thickness | 10-60mm |
| Maximum panel weight | 60kg |
| Linear velocity | 5-30m/min |
| Pressure | 0.8Mpa |
| Total power | 0.85kw |
| Weight | 450kg |
All machines can be customised to the buyer's requirement. Figures are the published data for this model series.
Quality Control
Checked Before It Leaves The Floor
- Translation squareness checked with sample panels
- Rubber roller and belt surface inspected
- Speed range verified from 5 to 30 m per minute
Customisation Options
Specified Per Order
- Table size set for your panel range
- Transfer direction and height matched to the machines either side
- Combination with a curve return line
Comparison
How It Compares With The Alternatives
vs Manual transfer between machines
The table removes the lift and the scuffing that goes with it, at 0.85 kW
vs Curve return line machine
The roller table transfers sideways between machines. The return line sends the panel back to the operator
Use Guide
Setting The Machine Up For A Run
Set table height to match both machines it connects
Confirm panel weight is under 60 kg
Set linear velocity to the slower of the two machines
Check air pressure is at 0.8 MPa
Related Machines
Curve return line Machine Return production Line for Edge Bander Machine
90 and 180 degree return table that sends the panel back to the operator. Built to order.
View Machine Data →
Curve return line Machine Return Line Automatic
90 and 180 degree return table that sends the panel back to the operator. Built to order.
View Machine Data →
Wooden Door Series-Powered Roller Conveyor with Translation Device power conveyor roller
Powered transfer table that moves panels 90 degrees between two machines. Built to order.
View Machine Data →
Questions About This Machine
Is this model set up for power translation roller table?
Yes. The standard power translation roller table configuration. Every machine is built to order, so the configuration is confirmed against your own panel size and coating system before production.
What is the connected load?
0.85 kW.
What is it for?
90 degree translation steering in panel conveying between two machines.
What panel size does it take?
300 to 2440 mm long, 250 to 1220 mm wide, 10 to 60 mm thick.
How fast does it move?
5 to 30 m per minute.
Does it mark the panel?
Rubber coated rollers and a synchronous rubber belt are used to protect the panel.
Ask For A Quotation On The Powered Conveyor Transfer Roller Table Power Translation Roller Table
Send your panel size, coating system and line speed. You will get the model recommendation, full technical data and a price.