Knowledge Centre For Wood Finishing Equipment
Buying guides, process guides and troubleshooting notes written from the published machine data, for engineers specifying a finishing line.
What Is Inside An INCRI Roller Coating Machine
Frame, lifting device, coating roller and transmission: the four parts of a roller coater that decide whether film weight stays constant after two years of production.
Product GuidePaint Circulation And Control On An INCRI Roller Coater
The stainless steel reflux tank, the heating bucket for UV paint and the electrical components that keep coating thickness constant through a shift.
Process GuideHow A Wire Brush Machine Works And What It Can Texture
Which products the machine suits, the working widths and thickness range, and what the disc brush swing device actually changes about the finished texture.
Process GuideInside An Automatic Reciprocating Paint Spraying Machine
Ventilation, structure, gun oscillating group, spraying group and operator panel: the five systems that make an automatic sprayer repeatable.
Buying GuideHow To Choose A Wide Belt Sander For A Finishing Line
Head count, working width and floating versus calibrating heads, using the published data for the IBSG series.
Comparison ArticleRoller Coating Curtain Coating Or Spraying Which One Fits Your Panel
Three ways to put liquid coating on wood, what each one is actually good at, and the numbers that decide between them.
Design GuideFloor Space And Power For A UV Coating Line
The working areas and minimum power supplies published for each INCRI line, and why the building is checked before the machines are quoted.
Material GuideWhy Wood Flooring Needs A Back Seal
Cupping starts underneath the board. What a back coating machine does, and what the published 80 percent figure actually means.
Buying GuideChoosing A Vacuum Membrane Press For Door Fronts
Single, double or clamshell worktable, the vacuum and temperature figures that matter, and the film thickness range the press actually covers.
Troubleshooting ArticleCommon Wood Coating Defects And The Machine That Fixes Them
Nibs, orange peel, bubbles, burn through, sunken pores and lifted film, traced back to the stage in the line that caused them.
Still Deciding Which Machine You Need
An engineer will read your panel spec and coating system and tell you which machines actually apply, before you spend anything.