Layers Vertical Drying Oven vertical dryer machine
Stacked tray dryer that buys long flash off time without a long tunnel. Built to order.
View Machine Data →
10 machines in this category
Dryer Machine
IR levelling, vertical drying and UV curing. Whatever the coating needs, from seconds under a lamp to minutes on a tray.
Every Dryer Machine In The Range
vertical drying Mahcine Vertical Dryer House For Paint On Furniture Pane
Stacked tray dryer that buys long flash off time without a long tunnel. Built to order.
View Machine Data →
Wood Panel Vertical dryer machine drying machine
Stacked tray dryer that buys long flash off time without a long tunnel. Built to order.
View Machine Data →
Wood Panel UV Coating Line IR Heating Leveling Machine IR Heating
Infrared flash off tunnel that levels the wet film and drives out bubbles. Built to order.
View Machine Data →
Automatic Coating Line UV dryer machine flash off machine Heater Tunne
Infrared flash off tunnel that levels the wet film and drives out bubbles. Built to order.
View Machine Data →
UV dryer Machine UV Drying Machine with 6 lamps UV drying
Plug and play UV curing tunnel available from one to six lamps. Built to order.
View Machine Data →
UV dryer Machine UV Drying Machine with 4 lamps
Plug and play UV curing tunnel available from one to six lamps. Built to order.
View Machine Data →
Woodworking UV dryer machine 3 lamps UV Curing Machine for Sale
Plug and play UV curing tunnel available from one to six lamps. Built to order.
View Machine Data →
Woodworking UV dryer Machine UV Drying Oven Curing Machine
Plug and play UV curing tunnel available from one to six lamps. Built to order.
View Machine Data →
UV Dryer Machine Fast Curing Uv Drying Tunnel System For Mdf
Plug and play UV curing tunnel available from one to six lamps. Built to order.
View Machine Data →
Problems It Solves
What This Category Is Actually For
- A long IR tunnel would take a whole aisle of floor space
- Water borne and PU coatings need holding time the line cannot give
- Bubbles and pinholes set into the film before it reaches the UV lamps
- Orange peel from the coater is still visible after curing
- UV lamps run hot and the panel scorches under a long tunnel
- Cure is incomplete at line speed so the top coat stays soft
Who It Is For
Plants That Buy These Machines
- Lines running PU, water borne or NC coatings that need holding time
- Plants with limited floor length for a horizontal tunnel
- UV coating lines that need a flash off stage before the lamps
- Spray lines drying solvent before the panel enters a dryer
- UV roller coating lines curing primer and top coat
Core Advantages
Why The INCRI Build Of This Machine
1
Vertical Drying Oven
Stacked tray dryer that buys long flash off time without a long tunnel.
2
IR Heating Leveling Machine
Infrared flash off tunnel that levels the wet film and drives out bubbles.
3
UV Dryer
Plug and play UV curing tunnel available from one to six lamps.
4
Four ventilating zones in every
Four ventilating zones in every configuration
Application Scenarios
Where These Machines Are Used
Holding water borne coated panels until they are through flash off
Leveling PU primer before a sanding stage
Flash off between a roller coater and a UV dryer
Levelling after spray application on cabinet fronts
Curing UV primer between two roller coater passes
Final cure after a curtain coater on high gloss panels
Industries Using This Category
Solutions This Category Belongs To
Dryer Machine Questions
Why choose a vertical dryer over an IR tunnel?
It offers long leveling time and fast feeding speed while saving floor space and energy.
How many trays does it hold?
From 30 to 62 trays depending on configuration, and up to 114 on the ILVC 4/4.
What does the IR leveller actually do?
It heats the wet paint film so it flows level and the bubbles and unevenness formed during coating disappear before cure.
Can it handle profiled work?
It suits flat surfaces and workpieces with a certain concave or convex relief.
How many lamps do I need?
It depends on line speed and paint system. Machines are built with 1, 2, 3, 4 or 6 lamps, and the quantity can be customised.
What panel thickness does the six lamp machine take?
2 to 120 mm at 1300 mm processing width.
Get A Quotation For A Dryer Machine
Tell us your panel width, thickness and line speed and we will confirm the model and send technical data.