Back Coating Machine For solid wood floor Back Coating Equipment
Seals the underside of solid wood flooring so boards stop cupping in service. Built to order.
View Machine Data →
Coating Machine
Floor Putty Filling Machine Putty Machine
Fills open pores and nail holes in board at 10-30 g per square metre. The flooring configuration of the putty filling machine.
Product Overview
Heavy Putty Filling Machine For Floor Putty Filling
The flooring configuration of the putty filling machine.
A putty filling and coating machine for flat wood, plastic and metal surfaces. It replaces manual filling: the constant pressure structure keeps the film even on pieces that vary slightly in thickness, and an independent inverter and motor hold the applied weight between 10 and 30 g per square metre. Working widths are 600, 1000 and 1300 mm.
ICDT600ICDT1000ICDT1300
Key Benefits
What This Machine Changes On Your Floor
1
Putty filling substitutes manual work at the slowest point of the line
2
Constant pressure structure copes with slight thickness differences between pieces
3
Independent inverter and motor hold 10-30 g per square metre
4
Excess putty is recycled rather than wiped off and binned
Who It Is For
Plants That Buy This Machine
- Door plants filling nail holes and joints on flat leaves
- Finishers working with plastic or metal flat sheet as well as wood
- MDF and plywood plants filling surface pores before primer
Problems It Solves
What It Removes From Your Process
- Putty weight varies, so some panels need a second fill and others waste material
- Slight thickness differences between panels leave some pieces under filled
- Filling pores and pinholes by hand is the slowest station in the finishing line
Application Scenarios
Typical Jobs It Runs
Filling plywood surface voids ahead of a roller coater
Levelling a concave surface so the primer does not sink
Filling the face of fibreboard before UV primer
Technical Features
How It Is Built
- Independent inverter and motor for precise speed and weight control
- Imported belt, roller, shades and motor
- Excess paint recycled back to the tank
- Heater power 2 kW for putty viscosity control
- Constant pressure structure for even filling on varying thickness
Specifications
Technical Data
| Parameter | ICDT600 | ICDT1000 | ICDT1300 |
|---|---|---|---|
| Max.Processing Width | 600mm | 1000mm | 1300mm |
| Processing Thickness | 2-90mm | 2-90mm | 2-90mm |
| Min. Processing Length | 300mm | 300mm | 300mm |
| Feeding Speed | 0-20m/min | 0-20m/min | 0-20m/min |
| Feeding Power | 1.5kw | 1.5kw | 2.2kw |
| Coating Roller Power | 1.5kw*2 | 1.5kw*2 | 1.5KW*2 |
| Doctor Roller Power | 0.55kw*2 | 0.55kw*2 | 0.55kw*2 |
| Filling Roller Power | 1.5kw | 1.5kw | 1.5kw |
| Heater Power | 2kw*2 | 2kw*2 | 2kw*2 |
| TTotal Power | 11.1kw | 11.1kw | 11.8kw |
| Dimension(L x W x H)mm | 2145*1920*1640 | 2145*2300*1640 | 2145*2600*1640 |
| Net Weight | 1400kg | 1750kg | 2000kg |
All machines can be customised to the buyer's requirement. Figures are the published data for this model series.
Quality Control
Checked Before It Leaves The Floor
- Applied putty weight measured against the 10-30 g/m2 range
- Constant pressure mechanism tested on panels of differing thickness
- Recycling circuit run tested for leaks
Customisation Options
Specified Per Order
- 600, 1000 or 1300 mm working width
- Roller hardness selected for your putty system
- Heater configuration for putty viscosity
Comparison
How It Compares With The Alternatives
vs Manual putty knife filling
One pass at a controlled 10-30 g/m2 instead of an operator judging each board
vs Roller coater applying primer heavy
Filling putty is formulated and metered to fill the hole. Flooding primer just sinks in and shows the pore again
Use Guide
Setting The Machine Up For A Run
Sand and dedust the board so the pores are open
Set heater temperature for the putty viscosity you use
Set feed within 0-20 m per minute and run a test board
Check applied weight, then cure or air dry before sanding
Related Machines
Back Coating Machine For MDF UV Back Coating Equipment
Seals the underside of solid wood flooring so boards stop cupping in service. Built to order.
View Machine Data →
Carpentry Tools Back Coating Machine For Cabinet/Floor Wood precise back coating
Seals the underside of solid wood flooring so boards stop cupping in service. Built to order.
View Machine Data →
Precise Stain Machine Furniture Wood Flooring woodworking stain machine 600mm
Brush roller stain coater that colours open grain and pore holes evenly. Built to order.
View Machine Data →
Questions About This Machine
Is this model set up for floor putty filling?
Yes. The flooring configuration of the putty filling machine. Every machine is built to order, so the configuration is confirmed against your own panel size and coating system before production.
Can it fill anything other than wood?
It is available for putty filling and coating on wood, plastic and metal flat surfaces.
What if my panels vary slightly in thickness?
The constant pressure structure is there for exactly that, so slight thickness differences still get an even fill.
Is excess putty wasted?
No. The machine recycles the extra material back into the system.
What working widths are available?
600, 1000 and 1300 mm.
How much putty does it apply?
Thickness can reach 10 to 30 g per square metre.
Ask For A Quotation On The Floor Putty Filling Machine Putty Machine
Send your panel size, coating system and line speed. You will get the model recommendation, full technical data and a price.